Availability
You can get up to 50 percent more starting power when you pick Summit Racing™ high-torque mini starters. They're 40 percent lighter, as well as 1/3 smaller. That latter characteristic translates into increased clearance, but both factors can be equally important in a race car. So can features such as full ball-bearing construction, which allows these starters to work great while lasting a long time.
( 676 )
$177.99
—
$214.99
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1509 )
$249.99
—
$299.99
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 49 )
$399.99
—
$799.91
Painless Performance 27-circuit Classic-Plus customizable GM truck chassis harnesses are designed to fit a wide range of trucks, Blazers, and Suburbans—whether C10, C20, or C30. They feature a factory-style bulkhead connector, allowing for easy mounting of the fuse block in the factory location, and have many factory connectors already installed on the harness out of the box. Each wire is custom-printed with the circuit identification, as well as using the GM color codes for easy installation. Wire your Squarebody once—and wire it right with these Painless 27-circuit Classic-Plus customizable GM truck chassis harnesses! Additional features and benefits include: * Each harness comes open-ended (headlight and taillight wiring) with extra length and can be paired with light socket kits (also available by Painless, but sold separately) * Included connectors for: the headlight switch, dimmer switch, wiper motor, ignition switch, blower motor and switch, blower resistor, and instrument cluster
( 35 )
$679.99
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$1,789.95
$1,163.95
—
$3,299.95
With their gear-reduction drives, heavy-duty Powermaster PowerMax starters really crank out the power--180 lb.-ft. of torque. So, they can handle engines with moderate compression ratios. If your stock starter clears your oil pan, the Powermaster PowerMax starters will, too. Some will also clear kicked-out pans. Powermaster PowerMax starters can be mounted in multiple orientations to fit your needs. Starter dyno reports are included.
( 1110 )
$132.99
—
$272.99
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 428 )
$289.99
—
$399.99
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1213 )
$112.99
—
$346.99
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 401 )
$380.95
—
$825.95
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 36 )
$549.95
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 883 )
$204.99
—
$335.99
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1744 )
$126.99
—
$515.99
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 431 )
$54.45
Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.
( 285 )
$217.95
—
$249.95
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1931 )
$210.95
$95.95
—
$299.95
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 324 )
$499.95
—
$699.95
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 92 )
$1,349.95
$877.95
—
$2,549.95
Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.
( 231 )
$292.99
—
$394.99
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 208 )
$259.95
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 364 )
$30.99
—
$484.91
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,199.95
Nothing could make re-wiring your Chevy/GMC truck any easier than Painless Performance harnesses. By adding a factory-style bulkhead connector and additional GM connectors, Painless made their universal harness a custom fit for these popular 2x4 and 4x4 GMC/Chevy pickups. These harnesses will work on pickups, Blazers and Suburbans. Includes circuits for: * Air conditioning * Heat * Camper cover lights * Cigarette lighter * Four wheel drive switch * Backup lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn (relay) * Ignition coil * Instrument panel lighting and gauges * Park lights * Power antenna * Power door locks * Power windows * Radio/clock (constant and switched) * Starting * Taillights * Third brake lights * Turn signals * Wipers and washer pump
( 43 )
$635.99
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 547 )
$763.80
—
$1,528.55
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
