Availability
Showing In Stock Items. Show All 40 Items.
Summit Racing™ LS oil galley barbell plug kits give you a cool, affordable way to improve your LS engine's oiling system. They include the rear "barbell" or "dogbone" which has a smaller stem diameter than the factory plastic unit to improve flow to the filter, a solid plug to delete the filter bypass in the oil pan, and a step washer and bolt to support the unsupported side of the oil pump pickup tube retainer.
( 6 )
$24.99
BTR offers DOD delete plug kits that provide an easy way to get rid of pesky, failure prone DOD/AFM lifters in your LT powered pickup truck. These plug kits include the necessary components to delete the problematic DOD system on your Chevrolet GM Gen V+ L84/L87 engine to remove the 8-cylinder AFM/DOD solenoids during a delete. From F-body trucks to Corvette, Sierra to Silverado, G8 to GTO, Brian Tooley Racing has just the components you need for making power with your LS or Gen V ride! Note: These cylinder deactivation components will not work for the L83/L86 engines.
( 2 )
$40.00
—
$44.99
ICT oil galley barbells have a "weighty" job to perform. Often overlooked, but very much needed, these oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. Little things may cause a big headache; for your build, replace the plastic barbell with a new one from ICT Billet.
( 1 )
$35.99
Where legally permissible when doing an LS or LT swap, ICT Billet fuel vapor purge solenoid plugs make life easier by blocking off the intake manifold EVAP port. They can be installed in seconds and come packaged and ready to go.
( 25 )
$22.99
—
$36.99
On Sale
Earl's Performance offers a complete line of power steering adapter fittings to accommodate a variety of thread sizes to plumb your pump. Earl's offers the most complete line of adapter fittings in the industry.
( 23 )
$49.95
Earl's Performance clutch adapter fittings convert OEM master cylinders, clutch release bearings, and slave cylinders to accept a better replacement for your less-than-perfect OEM plastic hose. These quick-disconnect fittings work perfectly with Earl's Speed Flex hose (not included). They're made from 304 stainless steel or aluminum and include EPDM O-rings. The adapter fittings are offered in several early and late model vehicle styles, straight and 90 degree angle. Check your OEM hose for the proper fit.
( 27 )
$24.14
ICT Billet plug fittings are AN, NPT, and metric O-ring hex head, male nut, block-off cap fittings. Most are manufactured from black anodized aluminum, providing you with the same performance, durability, and service life you expect from ICT Billet.
( 4 )
$29.99
Allstar Performance oil galley plugs are used by the factory to divert oil to the factory oil filter and prevent unfiltered oil from circulating through the engine. The original GM barbells are a nylon material that may become brittle over time and should be replaced when performing a rebuild or upgrades. These replacement galley plugs are offered in multiple materials for a variety of year/make and engine applications.
( 4 )
$26.39
ICT Billet coolant crossover delete kits are coolant/steam port block-off plate sets for LS-Series engines. Kits include two coolant ports, two O-rings, and two bolts. These kits do not have holes for crossover tube attachment. Made from aerospace-grade billet aluminum with a natural finish, they can be installed on the front or rear of the cylinder heads.
( 12 )
$29.99
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$76.35
—
$82.45
$41.99
—
$45.35
Tired of bruised knuckles and a greasy mess when lubing auto parts? The engineers at Moog have developed heavy-duty steering idler arm grease hose kits that help to easily lubricate fittings and restore handling performance. And without the pain and hassle. Order the kit recommended for your vehicle application.
Not Yet Reviewed
$21.99
These Trans-Dapt throttle body injection fuel line extensions are designed to keep your fuel lines from binding up when installing a spacer. They are made from quality material to withstand the fuel and heat underneath your engine compartment.
( 32 )
$38.99
ICT Billet offers fuel pressure regulator bypass plugs for a variety of applications. They install in place of the factory integrated regulator that is mounted to the fuel rail on truck intake manifolds. These plugs are required when using an external fuel pressure regulator. Machined from aerospace-grade billet aluminum, the plugs are compatible with LS Gen 3 truck/SUV round fuel rails. They include an O-ring and re-use the factory retainer clip. Order the model designed for your vehicle.
( 1 )
$29.99
The Right Stuff vacuum fittings are designed to get your vacuum system connected and operating properly. They are manufactured from quality materials and install in the factory location for a direct fit.
( 1 )
$31.99
Replacing your factory fuel lines? With ICT Billet fuel pressure sensor adapters, you can easily replace them with braided hose and retain your factory fuel pressure sensor. Made from aerospace grade billet aluminum and available in -6AN, -8AN, or 1/8 in. NPT. ICT Billet fuel pressure sensor adapters keep you connected.
Not Yet Reviewed
$36.99
The Right Stuff intake manifold fittings offer the right fit and the right performance! These natural finished steel fittings screw into your factory intake manifold to distribute vacuum to your various systems. Available in 90 degree and tee-style designs, The Right Stuff intake manifold fittings are a great choice for your restoration work.
( 10 )
$31.99
Trick Flow® engine steam line hoses for GM LS service your steam tube system. Whether you're plumbing just the front of your heads or all four corners, these hose kits will replace your old with new performance. Choose Trick Flow® braided black nylon covered rubber hose or braided stainless steel covered rubber hose.
( 17 )
$40.99
Replace freeze plugs in your engine block with JOES Racing Products expansion plug fittings. They're designed to install in place of your freeze plug and allow you to connect a separate hose to change the flow of your coolant. The fittings are made from durable aluminum and then red anodized for protection.
Not Yet Reviewed
$23.95
Eddie Marine billet aluminum water plates shine with a polished finish. They are available for both big block and small blocks, and they feature 1/2 in. NPT threads.
Not Yet Reviewed
$51.00
Detroit Speed offers straight fittings to convert your 1981 and earlier Saginaw 800 power steering gear to -6 AN fittings. These steel adapters are zinc plated to resist corrosion, and are ideal for vehicles with GM steering boxes between the years 1965-81. Order the thread size needed for your application. Detroit Speed power steering gear fittings are manufactured and tested to assure fit and performance.
( 2 )
$21.95
—
$24.95
Brake bleeding has always been an inconvenient and messy job--until now. Earl's Solo-Bleed bleeder screws will solve both problems. As direct replacements for the OEM bleeder screws, Solo-Bleeds allow you to safely bleed your brakes by yourself without the mess, and without the chance of air inclusion. They come available in many different sizes to fit virtually any vehicle.
( 22 )
$39.22
—
$46.61
Detroit Speed brake master cylinder fittings are designed to replace your old worn out and corroded fittings. Manufactured from high-grade aluminum, these fittings help to evenly distribute fluid to your wheel cylinders. Detroit Speed offers brake master cylinder fittings to fit and work on various applications.
Not Yet Reviewed
$21.95
ICT Billet oil cooler adapter plates are crafted from aerospace-grade billet aluminum. Each dual-port plate features an O-ring seal and will not require a gasket. ICT includes bolts with their oil cooler adapter plate kits.
( 2 )
$43.99
Complete your power steering pump connection with Tuff Stuff Performance fittings. Their selection includes a variety of styles, materials, and finishes. Most are compatible with Type II power steering pumps. Order the fitting size and configuration needed for your application.
( 15 )
$23.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
