Availability
Hinson Motorsports spark plug wire/boot protectors offer full-length heat protection. Featuring two layers of fiberglass, these slip-on guards help insulate and shield your wires from temperatures up to 1,200 degrees F. Plus, they are not only intended to defend your spark plug wires and boots from damage due to the exhaust heat, but they will also provide some protection to the wires if they come loose from the harness and lay on exhaust components. For engine configurations that utilize short plug wires, their design is ideal to protect the plug wires and boots from thermal damage, as they will cover the full length of the wire, from the cylinder head to the coil pack. Hinson Motorsports spark plug wire/boot protectors come available in a choice of colors.
( 12 )
$58.85
Summit Racing™ fuel pump heat shield wraps allow you to insulate the fuel pump from excess heat. The unique construction of the aluminized material provides protection by reflecting up to 90 percent of radiant heat.
( 6 )
$49.99
These Mr. Gasket starter heat shields are used to protect the starter from the high temperatures put out by exhaust manifolds or headers. They are made from two sheets of aluminum with a heat-resistant material sandwiched in between.
( 21 )
$49.95
Keep your plug wires properly protected from extreme underhood heat with Summit Racing™ spark plug boot heat shields. Our plug wire boot shields are inexpensive, extra protection from damaging heat-generating sources. Protect your plug wire boots and increase their lifetime. They offer an easy, snap-on installation.
( 5 )
$23.99
—
$32.99
Lingenfelter Performance Engineering stainless starter heat shields are designed with multi-layer ceramic and stainless steel to protect your starter from high-temperatures and greatly extend its life. These shields are excellent for use with aftermarket exhaust headers or in any application where high-temperatures might affect your starter performance and life. The heat shields include a stainless steel strap for an easy installation.
( 9 )
$113.95
Melting a spark plug wire on your hot rod can really put a damper on your day, which is why RESTOPARTS® Supplied makes these spark plug wire heat shields. Shields are made from a heat-resistant steel and molded to fit your exact application. They fit perfectly between the exhaust manifold and the spark plug wires so you can feel comfortable knowing your car will be firing on all cylinders.
( 2 )
$84.99
Increase the efficiency of your ignition system with ACDelco spark plug heat shields. They offer maximum protection from conductive and radiant heat, providing strain relief and vibration resistance. The boot protectors are GM-recommended OE replacement parts, compatible with a wide range of makes and models. These steel snap-on accessories prevent lasting damage to your spark plug wires.
( 6 )
$5.99
DEI catalytic converter shields are simple, but effective solutions to maintain optimum performance from your vehicle. Aggressive driving can cause excessive heat that can transfer to the interior or engine compartment, so keep things cool with these converter heat shields. DEI catalytic converter shields are available in a universal design to replace damaged or missing factory heat shields on almost anything you drive or application-specific designs to upgrade heat protection from critical engine components. Trust DEI to keep your vehicle cool and running at optimum performance.
( 4 )
$77.99
ACDelco starter heat shields meet or exceed OEM part specifications and are designed to deliver the fit, function, and performance of the original equipment. Choose replacements with a name you know and trust--ACDelco.
( 1 )
$19.99
—
$24.99
Moroso starter heat shields are engineered to protect starters against damaging heat from exhaust manifolds or headers. They are manufactured from a high-temperature insulating material sandwiched between two sheets of aluminum.
( 22 )
$46.99
—
$49.28
Hooker fuel/brake line heat shields are specifically designed to shield your factory fuel and brake lines. They attach to the inside of the driver side subframe rail from heat radiating off of your headers and exhaust. They feature stainless steel construction for corrosion resistance that will bring you long-lasting durability. Hooker fuel/brake line heat shields include all necessary hardware to make the installation quick and painless.
( 1 )
$89.19
Heatshield Products Lava oil filter heat shields help you avoid cooking your oil filter and the oil running through it, while protecting the filter from road debris. These shields encase the oil filter in proprietary Lava Cool volcanic rock fiber-based thermal barrier material. Each specially designed cover slides over the filter snugly and is held in place by magnets so it won't slip off. The magnets are effective at trapping metal debris inside the oil filter, further improving the filtration and offering your engine more protection. Available in sizes to fit most popular canister oil filters, these heat shields can withstand constant temperatures of 1,200 degrees F and intermittent temperatures of up to 2,000 degrees F. They're oil-,solvent-, and water-resistant.
( 6 )
$78.99
Mishimoto titanium turbo blankets help reduce the heat in your engine bay. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer and 96 percent silica fiber inner layer, Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Available in several sizes to fit popular turbochargers, titanium turbo blankets have an interior rating at 1,260 degrees C and can withstand up to 982 degrees C of direct exterior heat. Additional specs: * Rated to 1,800 degrees F direct heat and 2,000 degrees F radiant heat * Interior rated to max temperature of 2,300 degrees F * Available in T25/T28, T3, T4, and T6 sizes * Mishimoto Lifetime Warranty
Not Yet Reviewed
$174.44
—
$208.21
Heatshield Products Lava motor mount shields wrap around any factory or aftermarket engine support to create a thermal and acoustic barrier. This protects against motor-generated heat, along with other ambient elements that can reduce the longevity of your mounts. The shields can be used on both street and strip applications, allowing owners with high-horsepower engines to install supports strong enough to withstand their builds—while offering a vibration-free and smooth feeling similar to an OEM mount. Additional product features: * Easy installation (typically no need to uninstall the mount) * Made from crushed, melted, and then fibered volcanic rock * Designed to withstand continuous temperatures of 1,200 degrees F and intermittent 2,000 degrees F * Water, chemical, and acid-resistant * Protects rubber, polyurethane, and poly-graphite mounts
Not Yet Reviewed
$54.99
Corsa cat blankets are custom-engineered to help protect the C8 engine from added heat distributed from the Corsa Performance high-flow catalytic converters found on C8 Corvette models. While the C8 Corvette is an engineering marvel with its mid-engine configuration, eye-catching body lines, and its incredible performance, the engine placement comes with an abundance of heat. One area exposed to excessive exhaust heat is the catalytic converter. These catalytic converter exhaust heat shields have a Basalt lined, Titanium infused weave construction for superior protection and stop heat damage of the painted and carbon fiber parts. Additional features of cat blankets: * High-end Titanium weave construction * Double-reinforced seams with stainless steel thread for long-lasting durability * Custom-fitment, engineered to fit perfectly to Corsa Performance high-flow EPA-compliant catalytic converters * Provides superior heat protection up to 2,500 degrees F * Riveted anchor design with sprung connections allows for easy installation * 2-year manufacturer warranty
Not Yet Reviewed
$678.99
On Sale
Hooker starter heat shields are crafted from 304 stainless steel to provide long-term, corrosion-resistant protection. The shields offer an easy installation with the included hardware, and can be used with all Hooker and many other LS engine header applications.
Not Yet Reviewed
$39.60
$25.74
Dorman exhaust manifold heat shields allow you to replace a loose or missing exhaust manifold heat shield without replacing the manifold itself. Dorman's direct replacement heat shields are dimensionally verified to match the original and undergone material testing to ensure a reliable service life. Order the exhaust manifold heat shield suited to fit your needs.
Not Yet Reviewed
$51.99
—
$62.99
Shafer's Classic Reproductions choke tube insulation covers will protect your tube and keep the heat in. These reproduction pieces offer the proper fit and look for under the hood of your classic.
( 3 )
$10.99
DEI EGR covers protect your EGR system and nearby underhood components from damaging heat. The sewn-in hook-and-loop edges make for a quick and straightforward replacement without removing the EGR pipe. Just wrap the cover around the EGR pipe, close the edges, and then trim off any excess material--it's that easy! Features and benefits: * High-temperature glass fiber fabric bonded to aluminized outer facing * Handles direct heat up to 500 degrees F and radiant heat up to 2000 degrees F * Provides protection from oil, grease, and chemical spills * Available in three lengths
( 2 )
$22.99
AP Exhaust heat shields offer renewed protection, along with the right fit. They are manufactured from aluminized steel. Your exhaust system creates a lot of heat. Control the high temperatures and guard your floorboards with AP Exhaust heat shields.
Not Yet Reviewed
$27.79
Make your engine bay look better without sacrificing performance or airflow design with one of ZZP's Sonic/Cruse 1.4T turbo heatshields. ZZP designed their Sonic/Cruze 1.4T turbo heatshields with some airflow channels and a duct so the OEM airflow design of the sonic, pulling air from the lower grille and routing it upwards above the engine via fans and bay design, remains. Your intake and other components will be protected, as well as your hands when tinkering in the bay, but both the turbo and manifold still have plenty of venting to release internal heat as quickly as possible. If you added some sort of venting on your hood this would add even more benefit as it would directly pull heat from the manifold/turbo area via your added duct. Available in raw stainless or satin black finish. Additional product features: * Precision laser-cut stainless steel and bent for the perfect fit * Pre-assembled two-piece heatshield comes with all new hardware to mount into your engine bay * Available in two different finishes: raw stainless or satin black Cerakote Note: For 1.4's equipped with ZZP's Z04 turbo kit, this part will fit over the turbo and bolt to the engine, but you will not be able to use the third mounting point on the turbo. Designed around OEM turbo specifications, it should be a direct fit on OEM turbos and ZZP's V3 turbo.
Not Yet Reviewed
$110.99
—
$156.99
Van Steel composite spring heat shields guard against radiant heat. These aluminum plates are predrilled with multiple holes to work on all C3 rear composite spring mount setups. Van Steel heat shields are installed using your original spring hardware.
Not Yet Reviewed
$29.99
OER starter solenoid heat shields are designed for use on standard solenoids on V8 cars and trucks. Made to OEM specifications, these heat shields are easy to install.
( 2 )
$24.99
Walker heat shields are designed to reduce heat radiated from tailpipes that are routed close to gas tanks or flooring. The heat shields are available in a variety of sizes to fit your needs.
( 5 )
$15.99
—
$17.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
