Availability
Doug's Headers Y-pipe kits help to balance exhaust pressure, resulting in increased low-rpm power. These kits include all of the necessary parts and pieces to connect Doug's headers to the factory or aftermarket catalytic converter.
( 28 )
$289.45
Corsa off-road X-pipes upgrade your vehicle with high-quality stainless steel and race car-like sound. They feature mandrel-bent tubing and Corsa RSC technology that delivers a drone-free experience during cruise.
( 3 )
$893.99
—
$1,008.99
Our Summit Racing™ X-pipes are an affordable way to open up your exhaust system and add power to your vehicle. They feature mandrel-bent tubing to reduce backpressure. These X-pipes do not include catalytic converters and are for off-road use only.
( 79 )
$141.99
—
$149.99
Summit Racing™ Turbo Crossover Pipe Kits connect the single turbo exhaust manifolds to the opposite side of the engine to complete your turbine inlet. We offer versions for an optimal fit with our single turbo manifolds to work with most transmissions and bellhousings. They're built from 16-gauge, mandrel-bent 304 stainless steel--and use slip-fit or welded-on V-band flanges for an easy bolt-on fit. Clamps are included.
( 2 )
$249.99
Hooker LS turbo crossover tubes connect the two turbo exhaust manifolds. Hooker offers several versions (including a universal component kit) for an optimal fit and ground clearance based on your transmission and bellhousing. The crossover tubes are made from 16-gauge, mandrel-bent 304 stainless steel, and include flex joint and V-band flanges welded on for an easy bolt-on fit. Join your LS turbo manifolds for performance with Hooker crossover tubes.
( 13 )
$433.95
MagnaFlow manifold exhaust Y-pipes offer more power than stock. These stainless steel Y-pipe assemblies look good and fit good, like performance exhaust should! Replace your factory setup with MagnaFlow manifold exhaust Y-pipes.
( 11 )
$267.00
—
$598.00
Y-pipes are usually used to connect to original equipment exhaust system connection points. Kooks Headers Y-pipes are heavy-duty and crack-resistant, featuring large diameter stainless steel construction with smooth-flowing mandrel-bent tubing. Most are designed to be used with Kooks long tube headers. Kooks Headers Y-pipes are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, eliminates most "Check Engine Light" warnings Note: Kooks Headers Y-pipes may not be legal for sale, installation, or use in some areas. Check your state and local laws.
( 10 )
$1,008.37
—
$2,783.85
JBA Performance Exhaust Y-pipes are engineered and manufactured to complement JBA's 50-state legal Cat4ward headers. They're made from quality mandrel-bent tubing for good fit and durability. Plus, they're designed for an easy bolt-on installation, so you won't have a hassle getting them mounted. Hardware is included.
( 26 )
$300.45
—
$337.45
Walker direct-fit Y-pipes provide a solid merger solution between the manifold and muffler(s). These exhaust components will attach to your vehicle without any modifications. They're manufactured from steel and feature an aluminized coating for protection against corrosion. Choose the Y-pipe size and configuration designed for your specific make and model.
( 207 )
$68.99
—
$349.99
Borla X-pipes will not only increase the amount of power that your vehicle produces, but also give your muscle, sports, or luxury car a more aggressive sound. Crossover pipes let your exhaust gasses flow through the path of least resistance, balancing the pulses between engine banks—and achieving best performance gains in the higher rpm range. These X-pipes are built from lightweight, aircraft-grade T-304 stainless steel, and are available in various configurations and tubing diameters. They are a perfect complement to Borla's cat-back and header systems.
( 36 )
$399.99
—
$1,175.99
X-pipes are used primarily for high-rpm performance and race applications. Kooks Headers X-pipes are heavy-duty and crack-resistant, featuring large diameter stainless steel construction with smooth-flowing mandrel-bent tubing. Most are designed to be used with Kooks long tube headers. Some applications require cutting the factory exhaust system. Select models connect to the OEM connection point. Kooks Headers X-pipes are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, eliminates most "Check Engine Light" warnings Note: Kooks Headers X-pipes may not be legal for sale, installation, or use in some areas. Check your state and local laws.
( 10 )
$948.41
—
$2,326.03
AP Exhaust Y-pipes are direct-fit OE replacements. They are made from aluminized heavy-gauge steel with re-aluminized weld seams to prevent corrosion. Make repairs to your exhaust system with AP Exhaust Y-pipes.
( 13 )
$92.99
—
$129.99
Let your engine breathe easy! Pypes off-road X-pipes are free-flowing, with reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses, rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a Siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipes quicker, and this improved "breathing" increases horsepower. Pypes X-pipes' high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated pipes resist corrosion and extend the life of your system.
( 81 )
$281.97
—
$282.96
If you are replacing your exhaust system, don't overlook your Y-pipe. Hedman Y-pipes are designed to breathe easier than stock, giving you an easy performance upgrade for a low cost. These durable Y-pipes are made of mild steel and will keep breathing for years and years.
( 31 )
$182.99
—
$231.99
Flowtech catalytic converter Y-pipes are ideal for connecting Flowtech headers to the stock catalytic converter equipped exhaust system of your late model vehicle. These high-flow Y-pipes are made from thick steel tubing and are individually designed for specific applications, which cover a diverse group of vehicles.
( 42 )
$249.95
—
$277.95
Make your street ride a sweet ride with Corsa XO-pipes. These crossover pipes will provide balanced exhaust flow, equaling increased power and better throttle response with a cleaner, crisper sound for your baby. Corsa's full-length XO-pipes are made of 16-gauge 304L stainless steel with mandrel bends for beauty and strength. XO-pipes are designed to bolt on after the catalytic converter and come complete with installation instructions, all necessary hardware, and gaskets so that you'll have time to enjoy a quiet, no-drone cruise.
( 6 )
$516.99
—
$657.99
Dynomax universal Y-pipes are ideal for the do-it-yourselfer or custom fabrications. Manufactured using 16-gauge aluminized coated steel, they feature several O.D.-sized inlet and outlets, allowing for the easy fabrication of custom exhaust systems.
( 1 )
$84.99
Dynomax universal X-pipes are built for those enthusiasts who prefer to design their own exhaust. Dynomax universal X-pipes are made of high-quality aluminized steel, and several sizes are available to suit your needs.
( 11 )
$239.99
"X" marks performance! Stainless Works X-pipe kits are crafted from 304 stainless steel and designed to add greater flow and power to your ride. They are available in off-road and catted options—and they require no modifications, drilling, or cutting. The hunt for better exhaust performance ends with Stainless Works X-pipe kits.
( 4 )
$329.65
Corsa Cat-Connect X-pipes are designed for direct bolt-up to Corsa headers and exhaust, while retaining the factory catalytic converters and staying emissions legal. All Corsa exhaust systems are carefully engineered and designed to match the unique properties of the vehicle they're intended for—delivering perfect fitment and performance.
Not Yet Reviewed
$665.99
—
$932.99
Updating your exhaust with Walker direct-fit H-pipes can offer your system maximum flow. They're designed to fit with factory exhaust manifolds or aftermarket headers, and they bolt on easily without any modifications. Walker direct-fit H-pipes are manufactured from mild steel and feature an aluminized finish for protection against corrosion. Choose the pipes that match the exhaust set-up for your particular make and model.
( 17 )
$59.99
—
$97.99
Modify your exhaust system for maximum flow and performance with Dynomax X-pipes. They're designed to fit with factory exhaust manifolds or aftermarket headers, and they install easily with some modifications. Dynomax X-pipes are available in stainless steel construction, or mild steel with an aluminum finish for protection against corrosion. Choose the style and pipe diameter to meet the needs of your vehicle.
( 12 )
$228.99
—
$377.99
NXT Step Performance X-pipes will not only increase the amount of power that your vehicle produces, but will also give your vehicle a more aggressive sound. Crossover pipes let your exhaust gasses flow through the path of least resistance, balancing the pulses between engine banks—and achieving best performance gains in the higher rpm range. These X-pipes are built from lightweight, aircraft-grade T-304 stainless steel, and are TIG-welded for strength and visual appeal. NXT Step X-pipes utilize the original hardware and gaskets are included.
Not Yet Reviewed
$333.99
Free-up extra horsepower and get a more aggressive note with BBK after-cat X-pipes. These after-cat X-pipe attachments use free-flowing, 2 3/4 in. diameter, CNC mandrel-bent aluminized tubing with an X crossover pipe design to improve flow. These free-flowing X-pipes not only increase power, but they also add a crisp, raspy growl to the sound of your exhaust. BBK designed these after-cat X-pipes as mid-pipes to fit your application. They install by simply attaching them to an existing catalytic converter for an easy and street-legal installation.
Not Yet Reviewed
$299.99
—
$319.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
