Availability
Showing In Stock Items. Show All 116 Items.
The GM LS Series engines are being built for a lot of different performance and racing applications. You can see good ol' hot rodder ingenuity taking place as racers are running carburetors and even using distributors on these engines! These MSD LSx trigger converters plug into the factory crank sensor of an LS engine. They then convert the factory trigger signal into a 12 V square wave signal to trigger an MSD ignition control such as a 6 or 7 Series ignition control. If you are incorporating a front mount distributor into your LS engine, this means that you won't need to run an external crank trigger.
( 3 )
$19.13
Summit Bucks
Regular replacement of engine air filter elements is important for you and your car. Air filters trap airborne particles before they enter the engine. Excessively dirty filter elements decrease engine performance and increase fuel consumption. ACDelco Gold engine air filter elements use world-class filter technology to block 99 percent of airborne dust and dirt that can harm your engine--and they're available in panel and round styles to fit most vehicles. Benefits include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability for outstanding performance * The ability to trap microscopic dirt that can damage cylinder walls, pistons, and piston rings * Tight seals that help prevent unfiltered air from entering your engine * Sizes to fit virtually every car, light and heavy-duty truck, and SUV on the road today * Availability for virtually all makes and models * 12-month/12,000-mile limited warranty Round-style filters also feature: * A fine mesh screen to help reduce the risk of fire caused by engine backfires * Heat-resistant plastic on the top and bottom, with special sealing beads that provide a protective seal against automotive operating environments * A radial seal for easy installation on late model vehicles
( 126 )
$10.99
—
$19.99
Pacific Performance Engineering race fuel pressure relief valves are designed to replace the stock original. Machined from heat-treated stainless steel, these fittings help maintain fuel rail pressure during heavy engine load conditions. The PPE valves eliminate the potential low pressure DTC codes P1093 or P0087 (during power enrichment) caused by insufficient pressure relief valve spring pressure. Order the model recommended for your application.
( 11 )
$22.49
Summit Racing™ offers engine steam line fittings for GM LS applications from 1997 and up. They're designed to upgrade the factory steam tubes of your modified LS-powered cars and trucks—updating your race car plumbing system. The fittings are black anodized billet aluminum and attach to the corners of your GM LS cylinder heads. They feature -4 AN male threads and include O-rings and stainless steel bolts. Order the style best suited for your vehicle.
( 3 )
$12.99
Replace your plastic factory air bleeder screws with the longer lasting options from Pacific Performance Engineering. Plastic can become distorted over time. These direct fit aluminum screws are anodized in your choice of colors--and are strong enough to last indefinitely. Pacific replacements feature a nitrile O-ring and machined air channel on the threads to bleed air from the fuel filter housing. Upgrade to stronger screws today!
( 3 )
$13.49
Engine Works offers lightweight fuel pump pushrods for a variety of applications, including many Chevy small block and big block engines from the 1950s and up. They feature a tubular design with one hardened steel end and one bronze end for use on all aftermarket camshafts. Aluminum rods with brass tips are also available. Select from models designed for use with cast iron or billet steel roller cams.
Not Yet Reviewed
$24.96
On Sale
Aeromotive fuel pressure sensor adapters allow the installation of Aeromotive high-flow fuel rails on stock engines when keeping the stock returnless fuel system. They're manufactured from billet aluminum and are black anodized for protection. Aeromotive fuel pressure sensor adapters provide the proper sealing port, bolt pattern, and mounting hardware to accept the stock Ford fuel pressure sensor, or couple it directly to the Aeromotive high-flow fuel rail. Order the model recommended for your vehicle.
( 4 )
$12.70
$11.43
ICT Billet fuel rail mounting bolt kits are designed for fastening stock fuel rails to the intake manifold. These hardware kits provide the correct thread and length needed for applications such as GM LS Series engines (1997-2014). The multi-piece packages include Grade 10.9 bracket bolts.
Not Yet Reviewed
$17.99
Dress up your existing intake manifold or ease installation of a new manifold with Summit Racing™ intake manifold bolts. They're made from rugged steel and plated for corrosion resistance, perfect for your next project.
( 46 )
$14.99
Summit Bucks
Top Street Performance offers fuel rail mounting brackets that come with the hardware necessary to mount your TSP Velocity fuel rails to its matching cathedral-port intake manifold. Order the kit designed to fit your application.
( 2 )
$16.04
Chevrolet Performance offers fuel tank caps for a wide range of vehicles. These GM-recommended OE replacements are crafted from plastic and include a tether strap so you don't leave it behind at the gas station.
Not Yet Reviewed
$19.99
Replace your grungy hardware. Dress up your engine and keep it looking good with Summit Racing™ classy stainless steel intake manifold bolts. They're made from rugged Grade 8 stainless, which means that not only are they strong and durable, they're also corrosion-resistant. They're hex-head bolts for easy installation, and they fit most popular manifolds.
( 141 )
$10.99
—
$18.99
ARP fuel pump pushrods are made durable to provide required reliability and improved performance. Made from aerospace chromoly steel, they are centerless ground to precise diameter. They have a hollow core to help reduce mass, creating less engine drag, and requiring less energy to operate your vehicle.
( 56 )
$18.99
—
$23.99
Summit Bucks
ACDelco GM Genuine Parts fuel filters are GM-recommended replacement components. They help prevent fuel contaminates, such as dirt and rust particles from entering the fuel delivery subsystem, and help keep the engine running properly. These original equipment fuel filters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 2 )
$20.99
These Summit Racing™ fuel pump block-off plates will seal your engine after you replace your mechanical fuel pump with an electric one. Made from billet aluminum and featuring a polished finish, they'll add some shine to your engine, too!
( 128 )
$13.99
—
$17.99
Spectre Performance fuel pump mounting plates are designed to attach your mechanical fuel pump to the engine block. The plates are manufactured from steel and then triple chrome plated for a great look. They also include a gasket, four bolts, and four washers.
( 26 )
$12.99
Allstar Performance intake manifold bolt kits include Grade 8, 12-point flange clear zinc bolts and stainless steel washers. These kits are designed to fit small block Chevy and Chrysler "A" and "B" engines where clearance is insufficient for standard hex head bolts.
( 12 )
$18.99
K&N inline fuel filters are designed for high-volume, low-pressure fuel systems. They're constructed of high-quality materials to withstand normal gasoline. Available with a sintered bronze, paper, stainless steel mesh, or polymer-coated paper element, K&N inline fuel filters screen out those harmful particles that can cause engine damage. For replacement or upgrade, order the model recommended for your vehicle application.
( 95 )
$15.99
—
$19.99
Summit Racing™ zinc alloy fuel pump block-off plates will seal your engine after you replace your mechanical fuel pump with an electric one. Made from one of the toughest materials around—zinc alloy, the plates have a 3-line design and are available in several finishes, so they're not only functional but also stylish. Select the Summit Racing™ zinc alloy fuel pump block-off plate designed for your vehicle.
( 17 )
$11.99
—
$15.99
ZZPerformance offers nose drive couplers for a variety of supercharger applications, including models such as Eaton and GM variants M62, M90, and M112. The couplers are made from a proprietary oil-impregnated material which has less friction than a standard supercharger coupler and will outlast the life of your vehicle. Don't be fooled into replacing your entire blower when you could possibly just need to replace the supercharger coupler itself. A worn coupler will cause a rattling noise at idle that goes away when you rev the engine. ZZP has over-engineered these replacement couplers to provide years of trouble-free use on cars with smaller-than-stock pulleys. Order the model recommended for your vehicle.
( 2 )
$19.99
WEHRS fuel pump mounting plates are the perfect replacement for lost or missing plates which are required to mount a mechanical-style fuel pump to most small block Chevrolet engines. These original-style aluminum plates are black anodized for durability and feature the WEHRS Machine logo.
( 4 )
$15.99
Summit Bucks
ACDelco Gold fuel filters are high-quality replacements for many vehicles on the road today. These filters help prevent fuel contaminates, such as dirt and rust particles, from entering the fuel delivery subsystem--and help keep the engine running properly. Gold fuel filters are manufactured to meet your expectations for fit and performance. Order the model recommended for your application.
( 52 )
$12.99
—
$18.99
Air filters are too often overlooked. WIX air filter elements play a vital part in preventing foreign particles like soot, carbon, and abrasives from damaging your engine. Even the smallest dust particles can damage cylinder walls, pistons and piston rings and cause premature engine wear. WIX panel air filters provide air with a linear path and low restriction. They have special pocket pleats in the media, held together with specially formulated adhesive. The filter media is framed by a urethane sealing gasket and is supported (when applicable) by a mesh screen, which are both molded in place with the filter element. WIX radial air filters feature a mesh screen on the inside and outside walls for element strength and media protection from backfires. Each filter is held together with heat-resistant plastisol with specially designed seals on the top and bottom walls and an adhesive seal that joins the media ends. WIX air filter elements for medium and heavy-duty trucks use more expensive compounds like silicone, rather than foam or rubber sealing gaskets, in order to assure a proper seal under harsh conditions. Their media feature embossed pleats and pleat stabilization beads that help the filter trap more dirt and last longer. End caps are designed with structure and fit in mind, many with metal end caps with handles, which allow for ease of installation and helps ensure that the filter becomes one with the housing to protect the engine.
( 69 )
$11.99
—
$19.99
On Sale
These fuel pump mounting plates mount behind your mechanical fuel pump for carbureted small block Chevy V8 and 90 degree V6 engines. They add a touch of shine to the area behind your fuel pump, and even come with a gasket.
( 10 )
$18.31
$16.48
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
