Engines & Components - Summit Bucks Savings Central - Free Shipping on Orders Over $109 at Summit Racing

Summit Bucks

S&S Cycle Head Bolt Kits

With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.

5.0 out of 5 stars ( 1 )

$21.95

—

$224.95

Summit Bucks

S&S Cycle Cylinder Studs

S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.

5.0 out of 5 stars ( 1 )

$99.95

Summit Bucks

S&S Cycle Breather Reed Valve Assemblies

S&S Cycle breather reed valve assemblies improve oil scavenging and reduce oil carryover. Plus, they'll make your bike run better. The steel breather reeds of these valve assemblies are normally closed. As they open and close again during the stroke cycle, a slight vacuum is maintained in the crankcase, greatly improving oil scavenging. Enjoy your riding experience even more after you install S&S Cycle breather reed valve assemblies.

Not Yet Reviewed

$165.95

Summit Bucks

S&S Cycle Billet Oil Pumps

S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets

Not Yet Reviewed

$445.95

—

$499.95

Summit Bucks

S&S Cycle Late Twin Cam Chain Drive Cam Chest Upgrade Kits

S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware

Not Yet Reviewed

$1,522.95

—

$1,924.95

Summit Bucks

S&S Cycle Super Stock Cylinder Head Kits

S&S Cycle Super Stock cylinder head kits feature stock-appearing cylinder heads with improved performance. These heads work well with engines of stock displacement but are ideal for engines with a little larger stroke or bore. They are compatible with stock rocker boxes, intake manifolds, and exhaust. The S&S high-performance valve springs allow for camshafts with larger lifts. Super Stock aluminum cylinder head kits are available in multiple finishes depending on application and they contain all the parts needed for installation except where noted.

Not Yet Reviewed

$1,723.95

—

$2,149.95

Summit Bucks

S&S Cycle Standard Adjustable Pushrods

S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.

5.0 out of 5 stars ( 1 )

$152.95

—

$249.95

Summit Bucks

S&S Cycle Quickee Adjustable Pushrods

Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.

1.0 out of 5 stars ( 1 )

$209.95

—

$336.95

Summit Bucks

S&S Cycle Precision Tappets

S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance

Not Yet Reviewed

$279.95

Summit Bucks

S&S Cycle 110 in. Power Packages

S&S Cycle 110 in. Power Packages are the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from late 96ci or 103ci to 110ci, as well as add matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Features: * 4 in. bore bolt on cylinder and piston kit * 10.5:1 compression * Wrinkle black finish * S&S 585 Easy Start cams in either gear or chain version * TC3 oil pump * TC3 cam plate * S&S cam chain tensioners or outer cam drive gears * Quickee adjustable pushrods with tubes * S&S precision tappets * Low-friction ductile cast iron liner * Bolts in with no machining, balancing, or splitting the crankcases * Cylinders fit to pistons--no machining required * All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number

Not Yet Reviewed

$3,396.95

Summit Bucks

S&S Cycle Super Stock Generator-Style Crankcases

S&S Cycle Super Stock generator-style crankcases for Big Twin engines with stock bores are designed with a stock-like appearance and incorporate updated design features that improve overall engine strength and reliability. Select the crankcase to fit your engine. Features and benefits: * Pre-clearance for strokes up to and including 5 in. * Motor mounts on crankcases for knucklehead engines are machined to fit stock 1936-47 frames. An adapter plate is included for 1948 and later-style frames * All cases are designed for late style generator, two brush type with 5/16 in. mounting bolts to eliminate early generator cradle/mounting strap bosses for simplicity and economics * Timken sprocket shaft main bearing, in all years, instead of stock-straight roller bearings; resulting in better flywheel assembly stability, placement and longer engine life * Kits include crankcase assembly, all required hardware and bearings for installation Note: All S&S crankcases use Timken style sprocket shaft bearings and 1958 and later pinion bearings. These cases will not accept stock 1957 and earlier flywheel assemblies.

Not Yet Reviewed

$2,195.95

Summit Bucks

S&S Cycle Late Twin Cam Easy Start Chain Drive Cam Chest Upgrade Kits

S&S Cycle Late Twin Cam Easy Start chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Easy Start kits allow the stock starter to start any engine regardless of compression ratio! Order the kit recommended for your particular Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Easy Atart chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware

Not Yet Reviewed

$2,025.95

Summit Bucks

S&S Cycle Early Twin Cam Gear Drive Cam Chest Upgrade Kits

S&S Cycle early Twin Cam gear drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. By eliminating the chains, gear drive camshafts keep the valve events at precise timing and free up parasitic loss. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Inner and outer gear * Premium lifters * Quickee pushrods * Pushrod tubes * Available with or without gear drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware

Not Yet Reviewed

$1,522.95

—

$2,029.95

Summit Bucks

S&S Cycle Super Stock Cylinder Heads

S&S Cycle offers several Super Stock cylinder heads to choose from for your motorcycle. They feature premium valves and high flowing ports to supply your engine with plenty of air, as well as high performance valve springs that may allow installation of cams with up to .650 in. of lift (depending upon cylinder heads chosen). Super Stock cylinder heads are also available in different finishes. Select the ones designed for your bike.

Not Yet Reviewed

$1,749.95

—

$1,999.95

Summit Bucks

S&S Cycle 883 to 1200cc Hooligan Cylinder Kits

An 883 to 1200cc Hooligan cylinder kit for a Harley-Davidson®, like the ones made by S&S Cycle, provides a significant increase in engine displacement, resulting in substantially more power and torque without requiring major engine modifications, making it a popular upgrade for riders seeking better performance on their Sportster 883, with benefits like increased horsepower—by boosting the engine size from 883cc to 1200cc, the Hooligan kit delivers a noticeable power gain, allowing for better acceleration and highway cruising capabilities. Typically these kits are designed as "bolt-on" upgrades, meaning they can be installed without needing extensive machining or engine rebalancing, making the process relatively simple and straightforward. Compared to a complete engine rebuild, a Hooligan kit is a cost-effective way to significantly improve your bike's power. When installing a Hooligan kit, it may be necessary to upgrade the clutch to handle the increased torque produced by the larger engine. Depending on the specific kit and your bike setup, you may need to adjust fuel injection mapping to optimize performance.

Not Yet Reviewed

$1,128.95

—

$1,822.95

Summit Bucks

S&S Cycle Milwaukee 8 Chain Drive Cam Chest Kits

Upgrade your entire cam chest with S&S Cycle Milwaukee 8 chain drive cam chest kits! The parts in each kit are matched to ensure superior quality, fit, finish, and performance, and will include the necessary gaskets, components, and hardware required for a complete installation. S&S Cycle chain drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed to fit your bike. Features of Milwaukee 8 chain drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improves tappet stability in high-lift situations * Precision machined billet aluminum cam chain tensioner * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift

Not Yet Reviewed

$1,522.95

—

$1,721.95

Summit Bucks

S&S Cycle Early Twin Cam Chain Drive Camshaft Kits

S&S Cycle Early Twin Cam chain drive camshaft kits are an affordable way to increase performance. These kits allow you to reuse many stock cam drive components, saving you money on parts. Complete kits include the cams, gear cover gasket, cam bearings, and instructions. Go with the less expense and more performance of S&S Cycle Early Twin Cam chain drive camshaft kits.

Not Yet Reviewed

$399.95

—

$418.95

Summit Bucks

S&S Cycle 124 in. Hot Set-Up Cylinder Kits

S&S Cycle 124 in. (standard compression) Hot Set-Up cylinder kits package pistons and cylinders for use as replacements or as the basis for a new engine build. The pistons are a flat dome design, and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged flat domed pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. flywheels, resulting in 124 in. displacement * Cylinders can be used with stock or S&S cylinder heads with stock bolt pattern

Not Yet Reviewed

$1,643.95

Summit Bucks

S&S Cycle 4 in. Sidewinder Big Bore Kits

Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish

Not Yet Reviewed

$1,540.95

Summit Bucks

S&S Cycle Early Twin Cam Chain Drive Cam Chest Upgrade Kits

S&S Cycle early Twin Cam chain drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Inner and outer camshaft bearings * Quickee pushrods * Pushrod tubes * Available with or without chain drive camshafts * All necessary gaskets, O-rings, and hardware

Not Yet Reviewed

$1,522.95

—

$1,924.95

Summit Bucks

S&S Cycle 107 in. Big Bore Kits

S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance

Not Yet Reviewed

$1,345.95

Summit Bucks

S&S Cycle Standard Forged Rocker Arms

S&S Cycle standard forged rocker arms are designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller arms are available in the stock 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.

Not Yet Reviewed

$334.95

Summit Bucks

S&S Cycle 97 in. Big Bore Kits

S&S Cycle 97 in. big bore kits will increase the displacement of 88 in. engines to 97 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 97 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 97 in. big bore kits: * The 97 in. big bore kits for 88 in. motors yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 in. stroke, 97 in. displacement, and 9.7:1 compression ratio with stock heads (9.3:1 compression ratio with S&S 89cc heads or 10.7:1 with S&S 79cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Included S&S cylinders feature a much stronger cast iron liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders *Kit includes cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required

Not Yet Reviewed

$1,219.95

—

$1,287.95

Summit Bucks

S&S Cycle Street Performance .585 Valve Spring Kits

S&S Cycle offers Street Performance .585 in. valve spring kits to upgrade your bike's performance—so you don't have just another "me too" motorcycle. Order the valve spring kit designed for your make and model. Features and specifications: * Available for fitment on a variety of Harley-Davidson® and Buell models * Kit contains springs, top and bottom collars, keepers, and shims * Accommodates camshaft lift to 0.585 inches * Suitable for high performance applications * Coil springs reduce the risk of valve float

Not Yet Reviewed

$163.95