Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHECKER Parts and Accessories
Holley Sniper EFI HyperSpark Distributor Kits
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$1,024.95
Edelbrock E-Street Cylinder Heads
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,291.95
—
$1,332.95
Quick Fuel SS-Series Carburetors
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$1,024.95
Borgeson Power Steering Conversion Kits
Borgeson power conversion kits steer you in the right direction. With true modern power steering feel and feedback, these kits also offer sporty ratios to equip your classic ride with up-to-date precision. Borgeson power conversions are bolt-on kits available for both factory manual and power steering cars. They include re-manufactured integral power steering gearboxes designed to bolt to your stock mounting locations. So, whether you want to convert your manual steering or update your old factory power steering, Borgeson offers a no-cut, no-weld, no-loss of turning radius solution.
( 135 )
$1,084.45
Edelbrock Performer RPM Cylinder Heads
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 168 )
$1,040.50
—
$1,252.50
Quick Fuel Q-Series 4-Barrel Carburetors
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,126.95
—
$1,499.95
Holley Sniper EFI 2GC Large Bore Fuel Injection Systems
Holley Sniper EFI 2GC large bore fuel injection systems let you convert your classic 2GC large bolt pattern carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI. You can also use the Sniper EFI 2GC to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature two 100 lb./hr. fuel injectors capable of supporting 350 hp on naturally aspirated engines. The Sniper EFI systems are also available in a Master Kit option, which includes 20 ft. of fuel hose, two filters, one high-pressure EFI fuel pump, and all required fittings for a complete EFI fuel system conversion. Standard and Master Kit systems are available in a choice of throttle body finishes. Standard Sniper EFI system features: * Bolt-on 2GC large bore carburetor replacement * Universal throttle lever with TH350, 700R4 and 200-4R kickdown provisions * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control (with MSD Pro Billet, Holley Dual Sync, or Holley Hyperspark distributors) * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion for 1974-78 Chevrolet, GMC, Oldsmobile, and Pontiac vehicles that came with a Rochester 2GC large bore carburetor.
Not Yet Reviewed
$1,349.95
Edelbrock E-Tec Cylinder Heads
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$1,124.50
On Sale
Hays Street 650 Clutch Conversion Kits
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$1,075.95
Hays Twister Full Race Torque Converters
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,126.95
—
$1,349.95
COMP Cams Magnum Solid Roller Cam and Lifter Kits
COMP Cams Magnum solid roller cam and lifter kits are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod, show car with power accessories, a super gas, or a super competition car on alcohol, one of these kits will fit your engine's needs .
( 3 )
$1,144.95
—
$1,215.95
Edelbrock E-CNC 185 Cylinder Heads
Edelbrock E-CNC 185 cylinder heads feature fully CNC-machined intake ports, combustion chambers, and exhaust ports for improved performance. Their all-new design delivers optimal airflow for maximum horsepower and torque in high performance street vehicles and small engine racing applications. The heads maintain the stock 23 degree valve angle and the intake flange is drilled to accept 1986 and earlier intake manifold designs. The CNC-machined ports give you a 64cc combustion chamber, a 185cc intake runner, and a 75cc exhaust port.
( 1 )
$1,171.50
MSD Pro-Billet Hall-Effect Cam Sync Distributors
If you're assembling an aftermarket EFI system, then these MSD Pro-Billet hall effect cam sync distributors are for you! They offer a magnetic pickup to trigger the ignition, and they now have a new hall-effect pickup to set up the cam synchronization for most EFI systems. The MSD Pro-Billet hall-effect cam sync distributors also feature a special built-in LED that illuminates when the sync signal is detected, making setup simple. In addition, the distributors include an adjustable slip collar for compensation in engines with modified deck heights or custom intake manifolds. The MSD Pro-Billet hall effect cam sync distributors' small diameter cap keeps the distributors low in the engine for extra clearance, and a ball bearing guides the QPQ-coated shaft for stable operation through high rpm.
( 2 )
$1,126.95
COMP Cams Xtreme Fuel Injection Retrofit Cam and Lifter Kits
These COMP Cams Xtreme retrofit fuel injection cam and lifter kits are designed to take advantage of the newest developments in camshaft design and to provide maximum performance in late model applications. They are ground on a 113 degree lobe separation using faster-opening and more efficient ramp profiles. COMP Cams Xtreme fuel injection cam and lifter kits include a matched set of COMP Cams High Energy lifters to maximize efficiency. Are you working with fuel injection? Get the most power out of your engine with one of these COMP Cams Xtreme fuel injection cam and lifter kits.
( 1 )
$1,152.95
—
$1,215.95
COMP Cams Xtreme Energy Cam and Lifter Kits
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 388 )
$1,171.95
—
$1,442.95
COMP Cams Xtreme Energy 4x4 Cam and Lifter Kits
COMP Cams Xtreme Energy 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and low-end torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 69 )
$1,445.95
Edelbrock Rollin' Thunder Hydraulic Roller Cam, Lifter, and Pushrod Kits
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,119.95
COMP Cams Xtreme Marine Cam and Lifter Kits
COMP Cams Xtreme marine cam and lifter kits take advantage of the newest developments in camshaft design. Their aggressive lobe design produces better throttle response and top-end horsepower than other systems with the same duration at .050 in., while delivering increased engine vacuum. These kits are available for everything from pleasure boats to race applications, so you can always have Xtreme performance on the water.
( 20 )
$1,152.95
—
$1,215.95
COMP Cams Xtreme Energy Retrofit Cam and Lifter Kits
COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 41 )
$1,215.95
COMP Cams Nitrous HP Retrofit Cam and Lifter Kits
Get more power from your nitrous system! Comp Cams Nitrous HP retrofit cam and lifter kits are designed to work with your nitrous system. Their unique intake lobes allow your engine cylinders to fill better, for more complete combustion. Meanwhile, their exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system without any loss of throttle response or torque in street applications.
Not Yet Reviewed
$1,152.95
COMP Cams Nitrous HP Cam and Lifter Kits
COMP Cams Nitrous HP cam and lifter kits are designed to work with your nitrous system to get more power from your engine. The unique intake cam lobes allow your engine cylinders to fill better for more complete combustion. While, the exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.
( 6 )
$1,215.95
COMP Cams Magnum Retrofit Cam and Lifter Kits
COMP Cams Magnum retrofit cam and lifter kits are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod, a show car with power accessories, a super gas, or super competition car on alcohol, COMP Cams kits will fit your engine's needs.
( 10 )
$1,202.95
—
$1,215.95
COMP Cams Aluminum Roller Rocker Arms
COMP Cams aluminum roller rocker arms are made from a high-quality alloy, anodized for durability and good looks. They have needle-bearing trunnions to allow for high valve spring loads (over 350 lbs.) and a tensile strength of 80,000 psi. While these rockers are more expensive than COMP Cams High Energy or Magnum rockers, they're a great choice for any race application.
Not Yet Reviewed
$1,033.95
—
$1,417.95
Crower Enduro Stainless Steel Centerline Stud Mount Roller Rocker Arms
Crower Enduro centerline rollers are manufactured from heat-treated stainless steel and alloy steel tip rollers. Crower offsets the rocker stud hole in the trunnion, pulling the rocker tip back into correct alignment with the valve stem to ensure centerline contact. Re-establishing correct geometry reduces valve guide wear and promotes more accurate valve timing, plus it creates less friction for increased rpm potential. Crower's Enduro centerline roller rockers are available in various ratios, so you are good to go.
( 7 )
$1,023.99
—
$1,279.99
