CAN-AM Air & Fuel Delivery - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

S&B Filters UTV Intake Particle Separators

Off-roaders know that dust is a leading culprit for clogging air cleaners, robbing horsepower, and, when left unchecked, major engine damage. S&B Filters particle separators remove 94 percent of dust before reaching the stock filter. Air is spun as it enters one of 19 vortexes, throwing dust to the outer side of the air tubes. A scavenge fan, rated for 50,000 hours in rough conditions, ejects the dust through the exhaust and pulls clean air to the filter. The S&B particle separator and stock filter reach capacity after 2,536 grams of dust, versus a mere 74 grams with the stock system and filter. The included billet clamps allow these separators to be mounted to most UTV roofs or cages. Play in the sand all day when you're equipped with an S&B Filters particle separator. Order the model designed to fit your machine.

4.67 out of 5 stars ( 3 )

$499.00

Injector Dynamics ID1050x Fuel Injectors

Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life

5.0 out of 5 stars ( 9 )

$273.00

K&N Powersports Performance Air Filters

These K&N powersports performance air filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion, even at high altitudes. As a rule, no jet changes are required with just a K&N filter element. K&N powersports performance air filters are washable and reusable and provide for high airflow with excellent filtration.

4.72 out of 5 stars ( 86 )

$68.99

—

$83.99

K&N XD Air Filters

Developed for use in the extreme conditions encountered by Baja 1000 race teams, K&N XD air filters are equipped to handle the stresses and dust loads found in off-road conditions. These filters use a deep pile design and extra-fine, weave-grade cotton for increased protection and efficiency in high-dust environments. XD air filters can be cleaned in the same way as K&N's original cotton air filters. Available in conical or round styles, the filters are offered in a variety of sizes to fit your application.

5.0 out of 5 stars ( 1 )

$68.99

Clearance

WIX Filters Fuel Filters

Fuel filters are often forgotten--yet the gasoline, diesel, or biodiesel fuels we put into our vehicles typically contain contaminants such as dirt, rust, scale, and water. Such impurities can plug fuel injectors and carburetors, resulting in serious engine problems. The contaminants often originate from dirty and rusty storage tanks, and as the vehicle ages, from corrosion within the fuel system. While important for gasoline-fueled engines, fuel filters for diesel engines are especially critical. All diesel fuel contains some water--and removing it is crucial. The primary fuel filter for any diesel engine should always be a fuel/water separator and all WIX fuel filters for diesel engines feature Quickvent water removal capabilities. Biodiesel fuels have a solvent quality and a tendency to attract even more water, and increase the need for proper fuel/water separation. Whether gasoline or diesel, help your engine run cleaner, healthier, and longer with WIX fuel filters.

4.7 out of 5 stars ( 196 )

$7.99

Agency Power Adjustable Blow-Off Valve and Hose Kits

By installing a blow-off valve, you can improve boost response, prolong the life of the turbo, and of course, get that cool swoosh sound! If you want to install a blow-off valve on the Can-Am X3, there is one problem … no place for it! However, this is now possible with the Agency Power blow-off valve hose kit and adjustable blow-off valve that is designed to connect to the compressor side of your turbo and the plastic charge tube. The 3-ply silicone tube allows you to install our adjustable blow off valve with a 1 in. flange. The smooth inside of the silicone tube helps eliminate any turbulence caused by OEM corrugated designs. To run a blow-off valve on the X3, you need to pull vacuum which keeps the valve shut under boost. Because there is no pressure source to tap into, a special machined fitting is included which fits on to the intake manifold. The blow-off valve is what separates this Agency Power kit from others. The CNC-machined aluminum valve features a piston and spring design to provide sharp boost response when needed. The spring has been spec'd to accommodate the needs of the Can-Am X3 turbo system. Designed as a vent to atmosphere valve, it releases the built-up charge pressure giving you a loud whoosh sound when you let off the throttle. The top portion of the valve can be turned 360 degrees allowing you to adjust the stiffness of the spring. This gives you the control of when you want the blow-off valve to release pressure. Each valve is anodized black and features the Agency Power cursive logo laser engraved on it. Key product features: * 3-ply silicone construction * Adjustable vent to atmosphere blow-off valve * Stealth silicone hose is available in black, red, or blue * Includes vacuum block Fitment: 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2-door and 4-door. The Can-Am X3 Turbo 120 HP requires intercooler upgrade kit—this is sold as the complete BOV and silicone hose kit.

Not Yet Reviewed

$200.00

All Balls Racing Carburetor Rebuild Kits

Revive your ride with All Balls Racing carburetor rebuild kits. Available for most any motorcycle, dirt bike, ATV, UTV, or snowmobile, their huge selection of kits will contain the components necessary to service your carburetor, restoring performance and reliability. Choose the kit designed for your motorcycle or off-road machine. Important features: * Intended for Closed Course Racing Only * NBR ethanol-resistant rubber material is used on all O-rings and rubber gaskets * High performance interface gasket material is used for all paper gasket applications

4.13 out of 5 stars ( 8 )

$34.79

—

$78.77

Injector Dynamics ID1750x Fuel Injectors

The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates

Not Yet Reviewed

$609.00

S&B Filters Replacement UTV Air Filters

S&B offers replacement UTV air filters for a variety of all-terrain vehicles, including Yamaha, Polaris, and Can-Am. The synthetic filter media is washable and reusable, making these elements a great long-term value. Protection for your engine begins with top-quality air filters to trap dust and other debris. Order the model recommended for your UTV/ATV.

5.0 out of 5 stars ( 4 )

$75.00

S&B Filters Powersports Particle Separators

Keep your UTV's air filter clean and engine protected with S&B Filters Powersports Particle Separators. A UTV's filter can clog quickly, robbing the engine of power. The S&B Powersports Particle Separators are a game changer—allowing UTV owners to maintain horsepower and torque by keeping their air filters cleaner for a much longer period of time. S&B designed this system large enough so that there is no loss in power when used with the factory filter system. By using the same technology military helicopters use to maintain power in extremely dusty conditions, S&B's Powersports Particle Separators remove 94 percent of dust from the airflow before it even reaches the stock filter. This dramatically extends the lifespan of your UTV's air filter, so you can maintain horsepower and torque for a much longer period of time. Don't let the elements get you down. Maintain power throughout you ride ... go further and go faster with the Powersports Particle Separators from S&B Filters! Product features and benefits: * Running the S&B Particle Separator is less restrictive than running without one—there is no loss of horsepower because your filter is not getting bogged down with dirt and debris, resulting in less restriction and maximum airflow * S&B Particle Separator removes 94 percent of dust from the airflow before it reaches your air filter to dramatically extend the life of your filter—this saves you time and money from constantly having to replace your air filter * Clean air is directed to your air filter while the scavenge fan ejects dust through exhaust * Centrifugal force spins the dust against the outer wall—clean air continues forward * S&B Powersports Particle Separator is designed to protect from water, snow, sand and fine dust to maintain power throughout your ride—just what a race-tuned UTV needs to finish faster with more power * Whisper quiet fan technology—when you're at idle or the vehicle's rpm is low, the fan speed is lower allowing you to talk and listen to music without hearing the fan; once you hit the gas, the scavenge fan instantaneously accelerates to provide maximum protection for your filter—it's the best of both worlds! * The Particle Separator's versatile billet clamps allow it to be installed in many positions on either the upper or lower roll bars of your UTV and accommodates most roof configurations * The Particle Separator integrates into the body of UTV Pro XP models for a factory fit and finish while allowing clearance for up to 40 in. tires, so you can say yes to all those other cool accessories while still protecting your engine * When installed on the upper roll bar, the Particle Separator allows your UTV to engulf more air—with this additional airflow, your engine will maintain its highest level of performance in horsepower and fuel economy

Not Yet Reviewed

$499.00

All Balls Racing Fuel Pump Modules

All Balls Racing fuel pump modules are designed to restore lost performance on a broken or poorly functioning fuel pump. These electric in-tank modules draw less current than OEM units—while maintaining the same flow rate at working pressure—to reduce operating temperature and extend the life of the unit. Each pump includes a complete module, retaining nut, and gasket. Order the replacement fuel pump module designed to fit your ATV/UTV application.

5.0 out of 5 stars ( 10 )

$225.53

—

$338.07

All Balls Racing Fuel Pump Kits

Performance and reliability start with All Balls Racing. Their fuel pump kits offer an economical solution to restore the performance of a non-functioning OEM fuel pump module. Each kit includes all the necessary components, from the necessary pump and filter to hoses and clamps as needed for your model. Rebuild your fuel pump with a kit from All Balls Racing. Select the kit designed for your off-road or street machine.

2.33 out of 5 stars ( 3 )

$85.64

—

$93.75

UNI Filter Multi-Stage Competition Air Filters

Leave it to UNI Filter multi-stage competition air filters to launch the performance air filter into the next century. The lifeblood of your air intake system is the air filter, and a high-quality filter is guaranteed to breathe new life into your system. The unique two-stage design of these air filters leaves the outer layer dry for longer periods of power-producing airflow--or oil them for those times when the conditions are soggy. UNI Filter multi-stage competition air filters trap more dirt, have a snug fit, and afford longer rides with more power.

5.0 out of 5 stars ( 12 )

$25.99

—

$66.99

S&B Filters Particle Separator Straps

S&B Filters particle separator straps are available in several different clamp diameters to fit various size bars. These straps are the perfect fit for the person who damaged or lost a strap on the trail or even relocated their particle separator to a different location that had a different diameter bar. They are designed to firmly hold your particle separator securely in place, thus, allowing your engine to experience clean airflow throughout the ride.

Not Yet Reviewed

$30.00

K&N 63 Series Aircharger High Performance Cold Air Intake Kits

K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!

4.61 out of 5 stars ( 604 )

$524.99

All Balls Racing Fuel Tap Repair Kits

Performance and reliability begin with All Balls Racing fuel tap repair kits. Available for several street bikes and off-road machines, each kit contains the components necessary to repair your petcock. Kits may include gaskets, O-rings, screws, washers, and more as needed for your application. Select the kit designed for your motorcycle, dirt bike, or ATV.

Not Yet Reviewed

$16.55

—

$17.31

Motion Pro Standard Black Vinyl Throttle Cables

Motion Pro standard black vinyl throttle cables are designed to meet or exceed OE quality. These black vinyl cables feature a coil wound housing and an inner nylon sleeve for longer life and smooth operation. They are available in a wide variety of applications.

5.0 out of 5 stars ( 3 )

$26.59

—

$27.79

On Sale

NOS UTV Nitrous Oxide Systems

Do you want more power in your late model UTV? NOS offers UTV nitrous oxide systems that add horsepower at the flip of a switch. These kits include the NOS mini 2-stage progressive nitrous controllers for exceptionally smooth power delivery. The kits are engineered to be easily installed and require no modifications to your induction system. Choose from kits with different bottle sizes and components in classic NOS blue or stealthy black finish. Order the NOS plate wet nitrous system designed for your powersports application. Features: * Little to no modifications to the fuel system, depending on application * Adds additional horsepower with included jetting * Additional horsepower possible with optional jetting and upgraded fuel delivery system or upgraded clutch kit/belt (depending on application) * Includes jetting for multiple rear wheel horsepower (RWHP) settings * 6061 T-6 aluminum bottle (2.5, 5, or 10 lb. sizes) * Wet nitrous system provides exceptionally smooth power delivery * Billet nitrous plate: 0.450 in. thick with 2.045 in. bore (black anodized finish) fits between throttle body and intake manifold * Vapor Guard fuel tee or billet fuel rail adapter (depending on application) is used for easy plumbing of fuel to the wet nitrous plate * 4 AN feed line size * PowerShot fuel solenoid * Flare jet style

Not Yet Reviewed

$1,199.95

$676.45

Nitrous Express Maverick Nitrous Plate Systems

Nitrous Express Maverick nitrous plate systems bolt between the cylinder head and the intake boot of all Mavericks to provide up to an additional 50 hp at the flip of a switch. The nitrous and fuel solenoids are integrated into the nitrous plate, which looks great and makes installation quick and easy. The systems include an electronic wide-open throttle switch, so the nitrous only activates at full throttle and automatically deactivates when you let your foot off the accelerator pedal. Nitrous Express Maverick nitrous plate systems can be installed in one afternoon with common hand tools. Maverick systems come complete with: * Lightning Series integrated nitrous and fuel solenoids * Braided stainless hoses * Billet nitrous plate * Direct plug-in fuel rail adapter--so there's no need to cut your factory fuel lines * Relay and relay harness * TPS Autolearn activation switch * Jetting for 20, 30, 40, and 50 hp * Available with 2.5 or 5 lb. nitrous bottle and two stainless bottle brackets

Not Yet Reviewed

$918.25

—

$936.47

Twin Air Backfire Air Filters

These Twin Air Backfire air filters have the same great characteristics as the regular off-road air filters such as improved airflow but also feature a laminated layer of backfire-retardant foam on the inside to help keep the element from being destroyed by a backfire. The choice of more world champions than all other filters combined!

Not Yet Reviewed

$31.99

—

$128.99

Twin Air Air Filter Dust Covers

Fit these Twin Air air filter dust covers over your Twin Air filter when your riding in severe conditions such as heavy dust and sand. These coarse foam pre-filters will act as an additional layer of protection and extend the service time between filter cleanings.

Not Yet Reviewed

$26.99

Twin Air Dual-Stage Air Filters

Twin Air dual-stage air filters deliver unbeatable performance and protection, which is why they are the hands-down choice of more world and national champions than all other filters combined. Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles without restricting airflow. They are available for most motorcycles and ATVs.

4.75 out of 5 stars ( 8 )

$26.99

—

$115.99

Shindy Products Carburetor Repair Kits

Shindy Products carburetor repair kits are complete kits to rebuild OE carburetors. Each kit contains all necessary parts, such as jet needles, main and slow jets, float chamber gaskets, and float valves. Get your engines running like new with Shindy Products carburetor repair kits.

4.33 out of 5 stars ( 6 )

$57.99

All Balls Racing Air Filters

All Balls Racing offers air filters for a wide range of applications, including many ATV and UTV models from Bombardier, Can-Am, Polaris, Kawasaki, Yamaha, Arctic Cat, Textron, Honda©, and Suzuki. These dry cellulose filters are available in a variety of styles, such as conical, round, panel, oval, cylindrical, square, and unique. Feed your machine clean air for optimum performance. Order the filter recommended for your off-road vehicle.

Not Yet Reviewed

$24.51

—

$40.56