CADILLAC ESCALADE EXT | Summit Racing

COMP Cams Short Travel XD Hydraulic Roller Lifters

COMP Cams short travel XD hydraulic roller lifters offer the advantages of both light pre-load and reduced oil volume, producing the most stable and highest-revving hydraulic lifter available. The XD versions feature heavy-duty tool steel pushrod seats. This adds strength and durability in extreme-duty applications, such as turbo drag cars and offshore powerboats. Certain engines respond better to a light lifter pre-load because it recovers more quickly from any bad harmonics in the valvetrain. Others work better with a heavy pre-load because oil volume is reduced under the plunger, which increases lifter stiffness. Now you have the best of both—with COMP Cams short travel XD hydraulic roller lifters. Order the model designed for your vehicle and engine application.

3.5 out of 5 stars ( 2 )

$969.95

Hays Twister 3/4 Race Torque Converters

Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.

3.18 out of 5 stars ( 11 )

$767.95

—

$870.95

B&M Holeshot Torque Converters

A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.

3.88 out of 5 stars ( 84 )

$819.95

Air Lift WirelessAir 2nd Generation On-Board Air Compressor Systems

Air Lift WirelessAir 2nd generation on-board air compressor systems allow you to inflate and deflate each air spring independently to different pressures. The one-touch control from inside or outside the vehicle makes them perfect for uneven or top-heavy loads. And with two user-defined memory buttons, WirelessAir can remember your frequently used settings. Control the air like a boss with your Air Lift WirelessAir 2nd generation kit. Features and items: * LCD-display wireless controller * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * Heavy-duty air compressor * All wiring, hardware, and fittings required for installation

1.0 out of 5 stars ( 1 )

$778.99

COMP Cams Max-Lift BSR Shaft Rocker Systems

COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.

4.2 out of 5 stars ( 5 )

$774.95

Nitrous Express 4-Bolt Plate Nitrous Systems for GM LS Engine

Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation

4.0 out of 5 stars ( 3 )

$857.57

—

$945.66

PRW Platinum Series Shaft-Mount Rocker Arms

PRW Platinum Series shaft-mount rocker arm systems fulfill the needs of successful racers and performance engine builders at every level. The Performance Quotient PQx rocker arms are made from quality alloy extrusions. These systems include CNC-machined billet steel pedestals, and ground, steel alloy rocker shafts—along with PRW SCM-4135 alloy steel fasteners, studs, and bolts. PRW Platinum Series shaft-mount rocker complete kits include all the components and hardware required for a professional installation. Order the system recommended for your specific vehicle and engine size. Features, items, and specs: * Several systems to suit many cam profiles * 8 pairs of shaft-mount rockers with adjustable cup-style valve lash adjusters * SAE 42100 full complement precision needle and cage roller bearings * Rated up to 750 lbs. open spring pressure * Internal oiling system for long-lasting performance

4.3 out of 5 stars ( 10 )

$797.25

Edge Evolution CTS3 Programmers

The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable

3.53 out of 5 stars ( 15 )

$767.95

Belltech Lowering Kits

If you're looking for fun and good looks with a head-turning pickup that you can depend on tomorrow and for years down the road, then Belltech lowering kits are the right suspension choice. Each suspension system that they offer is specifically designed to work and fit properly on your vehicle.

4.45 out of 5 stars ( 92 )

$834.00

McGaughy's Control Arms

McGaughy's rides on the reputation of their parts being bolt-on installations, and they make sure that their control arms work hand-in-hand with necessary factory suspension components. McGaughy's suspension engineering capabilities are endless, and they continue to release the high-quality suspension parts that the public demands.

3.83 out of 5 stars ( 6 )

$883.26

COMP Cams Sportsman Solid Roller Lifters

COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.

4.78 out of 5 stars ( 9 )

$888.95

Nitrous Express 3-Bolt Plate Nitrous Systems for GM LS Engine

Nitrous Express 3-bolt plate systems for GM LS-style engines feature a billet nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive on all LS car and truck intakes with a 3-bolt throttle body. Power levels can be adjusted between 50, 100, 150, 200, 250, 300 and 350 horsepower. Order the system preferred for your setup. Systems include: * Billet nitrous plate * Choice of 5 lb., 10 lb., 12 lb., or 15 lb. aluminum bottle * Stainless steel bottle brackets * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation

3.83 out of 5 stars ( 6 )

$857.57

—

$945.66

Melling AFM/MDS Delete Combo

Melling offers their engine cylinder deactivation kits for converting active fuel management engines to non-active fuel management versions. These AFM (active fuel management) or MDS (multi-displacement system) delete combos include a variety of components to help complete the changeover. Order the Melling AFM/MDS delete combo best suited for your application. Each kit includes: * MDS delete camshaft (1) * Non-MDS hydraulic roller lifters (16) * Lifter guides for Non-MDS engines (4) Application dependent components include: * AFM/MDS solenoid plugs (4) * Camshaft thrust plate (1) * Variable Valve Tming (VVT) oil control valve (1) Notes: * When installing a delete cam, the active fuel management lifters must be replaced using non-active fuel management lifters. * The valve lifter guides used in non-active fuel management engines differ from those used in active fuel management engines and must be replaced for this application. * The AFM/MDS solenoids must be replaced using non-MDS plugs. * The vehicle engine control module/powertrain control module must be reprogrammed to turn off the active fuel management system in the operating software. * Pushrod length must be checked during installation to verify the correct length.

4.4 out of 5 stars ( 5 )

$754.99

PowerStop Z23 Evolution Sport Brake Upgrade Kits with Calipers

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. PowerStop's Z23 Evolution Sport brake upgrade kits with calipers comes with everything you need--pads, rotors, calipers, and premium stainless steel hardware for an easy, bolt-on upgrade for your daily driver. Along with increased braking power, the carbon fiber ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with drilled, slotted, and zinc plated rotors to ensure a cool, smooth ride that protects against rust and corrosion, while the powdercoated calipers not only protect against corrosion, but also stand out behind your wheels. Give your daily driver the easy and affordable performance upgrade it deserves--PowerStop Z23 Evolution Sport caliper brake kits.

4.69 out of 5 stars ( 234 )

$930.64

COMP Cams Short Travel Hydraulic Roller Lifters

COMP Cams short travel hydraulic roller lifters have been engineered from a patent-pending design that specifically performs at higher engine speeds. They're designed to limit the lifter's internal piston as it is pumped up. By limiting that movement, the COMP Cams short travel hydraulic roller lifters cut down on the loss of power and limit valvetrain failure at higher rpm. The lifters are REM-finished and then black oxide coated for extreme durability, even for those high-revving engines. Choose the size, quantity, and other options tailored for your high performance application.

2.89 out of 5 stars ( 9 )

$781.95

COMP Cams Thumpr LS Camshaft Packages

COMP Cams Thumpr LS camshaft packages come as a complete valvetrain parts package that is matched for specific LS applications and desired performance. COMP Cams engineers have spent countless hours testing and creating valve train component combinations that are perfectly matched for maximum horsepower and dependability, as well as creating that wildly popular Thumpr sound in GM LS applications. Thumpr camshaft packages can add anywhere from 60 to 110 hp (depending on the application). COMP Cams Thumpr LS camshaft packages include: * Thumpr LS camshaft * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats

Not Yet Reviewed

$865.95

SSBC-USA B8-Brawler Front Caliper Upgrade Kits

When you want brakes that pack a big punch, choose SSBC-USA B8-Brawler caliper upgrade kits. They provide your vehicle with the knockout stopping power, style, and performance it needs to get the job done. Designed and engineered to provide ridiculously more stopping power, the 8-piston front B8-Brawlers overpower the empty space behind your wheels, improving the overall look and style of your everyday ride or prized, custom build. They're built from high-quality, aircraft-grade T6061 billet aluminum and are ready to bolt-on to the front axle of your vehicle. These SSBC-USA kits include high performance brake pads, all necessary hardware, and full instructions—everything in one box. The Brawler calipers are available in a clear anodized finish, or with a red or black powdercoat finish. Fully assembled, easy to install, and ready to beat the brakes off the competition; upgrade your current front brake system with CNC-machined, lightweight, large-bore, American-made calipers that bolt directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system--with easy installation. Choose the kit recommended for your vehicle. Additional features and benefits: * Heavy-duty stainless steel pistons * High-friction, low-dust brake pads * Full-size stainless steel bleeders * Bridge bolts offer maximum stiffness * Stainless steel pad clips * Dual seals (pressure and dust) * Improves the look of your vehicle * Direct-fit—no brackets required

5.0 out of 5 stars ( 1 )

$809.00

—

$865.00

JBA Performance Exhaust Cat4ward Headers

Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.

4.24 out of 5 stars ( 485 )

$800.99

Snow Performance Boost Cooler Stage-2.5 Water/Methanol Injection Systems

Snow Performance Boost Cooler Stage-2.5 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un-surpassed reliability and ease of install. They're designed for use in naturally aspirated carbureted gasoline vehicles.

4.75 out of 5 stars ( 8 )

$937.51

B&M Traveler Torque Converters

B&M Traveler torque converters are designed for use in motor homes, tow vehicles, or other heavy-duty applications where a slightly higher stall speed is helpful in getting the vehicle moving. Stronger than a stock converter, these Travelers have been internally modified to provide about 300 rpm more stall speed. This helps in initial acceleration without sacrificing normal highway operation. Pressure tested, fully balanced, and manufactured for long life, these Traveler converters will get you moving and on your way.

1.0 out of 5 stars ( 3 )

$921.95

MagnaFlow Direct-Fit Catalytic Converters

MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.

4.08 out of 5 stars ( 424 )

$980.00

Granatelli Motor Sports Ignition System Combo Kits

Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware

Not Yet Reviewed

$878.75

Powertrax Grip Pro Traction Systems

Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.

4.27 out of 5 stars ( 22 )

$812.99

Mahle Original OE Replacement Piston and Ring Kits

Mahle Original piston and ring kits have the same great OE features to provide the perfect fit and function in your vehicle. Things like compensated ring grooves to ensure proper ring loading and oil control and expansion-controlled designs for small fitting clearances to reduce engine noise, wear, emissions, and improve oil control. They offer pistons ready for installation with mounted piston rings, with pin and clips included for the convenience of the engine builder. Whether you're repairing or restoring, you can count on the performance of Mahle Original piston and ring kits.

Not Yet Reviewed

$783.99

CADILLAC ESCALADE EXT Parts and Accessories