Availability
Showing In Stock Items. Show All 122 Items.
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 435 )
$54.45
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 997 )
$99.95
—
$142.60
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$162.40
—
$206.64
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$144.25
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 10 )
$167.99
Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.
( 125 )
$69.99
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$183.81
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 35 )
$122.95
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 511 )
$49.95
—
$126.95
Summit Racing™ high-output 4-pin HEI performance modules feature a longer dwell time for better coil saturation. This equates to a hotter spark and better performance for your HEI setup.
( 13 )
$55.99
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 196 )
$52.69
—
$72.69
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$167.77
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1223 )
$399.99
With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.
( 63 )
$79.55
—
$85.25
On Sale
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 372 )
$27.99
—
$54.99
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 92 )
$65.89
$34.49
—
$79.09
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$84.99
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$35.99
—
$78.99
On Sale
ACCEL HEI in-cap Super Coils provide more high-rpm power and overall performance. Compatible with both original and computer-controlled HEI ignition systems, ACCEL HEI in-cap Super Coils are designed to resist shock and vibration. They have a finned cover that aids cooling, and hardware is included.
( 40 )
$100.95
—
$123.95
$75.95
—
$92.96
Looking to get a faster start, quicker acceleration, and better high-rpm performance from your HEI distributor? You can have it all with Summit Racing™ HEI coils. They deliver increased spark energy--48,000 volts' worth--to give you quicker starts and better acceleration. And special low inductance, high-temperature coil windings charge the coil faster so you'll get increased spark energy at high rpms, too.
( 22 )
$31.99
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 799 )
$114.95
ACCEL adjustable vacuum advance canisters for GM points V8 are designed to give you instant horsepower and throttle response. They permit infinite adjustment to both the amount and rate of advance. The advance chambers include an adjustment wrench and an instruction guide. To optimize your engine's timing curve, you need ACCEL adjustable vacuum advance chambers for GM points V8.
( 21 )
$59.25
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 136 )
$47.77
—
$52.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
