Availability
Showing In Stock Items. Show All 746 Items.
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 7 )
$65.99
—
$84.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 541 )
$50.99
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 104 )
$62.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 66 )
$69.99
—
$109.99
Chevrolet Performance composition head gaskets are recommended for stock and mildly modified engines. They're available in a variety of bores, compressed thicknesses, and volumes for fitment on specific vehicle and engine applications.
( 118 )
$59.99
—
$78.99
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 159 )
$55.99
—
$58.99
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z26 Street Warrior carbon-fiber ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust and eliminate noise on muscle cars and performance vehicles. These brake pads are made with a low-dust ceramic formula, infused with carbon fiber, to strengthen the compound and provide the extreme stopping power your vehicle deserves. Premium stainless steel hardware, along with ceramic brake lubricant, is included with the Z26 brake pads making it easier to complete your brake job.
( 268 )
$65.09
—
$88.66
Is your check engine light on and vehicle running rough? Could be a failed knock sensor. Dorman knock sensor kits combine the necessary sensor and wiring harness that joins them for a complete repair in one package. Features include: * Plug-and-play installation--matches original wiring harness, requiring no cutting or splicing * Quality assured--benchmarked against original components for performance and quality * Excellent value--original equipment quality at significant cost savings
( 20 )
$77.95
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$83.99
—
$94.99
Fel-Pro PermaTorque MLS head gaskets provide the robust seal needed to contain peak combustion pressures and temperatures—and to withstand the significant casting motion encountered in many of today's automotive engines. The gaskets feature multiple layers of steel, precisely engineered sealing beads, and advanced polymer coatings to maintain a proper contact pressure between the cylinder head and block. Unlike other multi-layer steel head gaskets, PermaTorque MLS seals also include a proprietary blue aftermarket coating that accommodates a wider range of surface finishes. These gaskets are manufactured using precision tooling to ensure exact sealing bead location and profile. Order the model recommended for your specific vehicle and engine application.
( 86 )
$50.99
—
$56.99
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$68.99
—
$71.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 542 )
$87.95
—
$96.54
Mobil 1 Synthetic LV ATF HP is an advanced full synthetic automatic transmission fluid formulated from synthetic base oils and an advanced additive system. It is approved and licensed by General Motors against DEXRON HP ATF. This high performance synthetic formulation delivers extended transmission life with its improved oxidation and thermal stability. LV ATF HP has frictional properties that provide smooth gear shifting during all operating conditions. The inherently high viscosity index and stability of Mobil 1 Synthetic LV ATF HP helps to protect against thermal breakdown at high operating temperatures—while still providing outstanding performance at extremely low ambient temperatures.
( 26 )
$58.99
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 156 )
$90.00
—
$95.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 133 )
$53.99
—
$100.99
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 146 )
$64.99
—
$74.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 35 )
$66.99
—
$108.99
On Sale
With Summit Racing branded all 100% silicone 8mm constructed wire, a 300ohm per foot wire wound EMI suppression core, high heat silicone boots and stainless steel and brass terminals, you get all the high end features a wire set can offer, without breaking the bank! The dual silicone High-Tear resistant jacketing with fiberglass matting, gives you the highest heat protection and superior terminal pull off values in the business! With our 300ohm per foot Wire-Wound magnetic suppression core, you can be sure of maximizing the voltage output of your ignition system, while maintaining high EMI resistance values. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery. Ultra High heat silicone spark plug boots provide superior radiant heat protection. High dielectric strength properties virtually eliminate voltage leakage and blow through. With all of these features built into our Summit Racing high-end 8mm sets, along with Made in the USA workmanship, you can be assured that installing one of our sets will give you the confidence and reliability you have come to expect from Summit Racing products.
( 1008 )
$55.99
—
$57.99
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 75 )
$92.99
—
$109.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$54.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$52.99
—
$82.99
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$53.95
Chevrolet Performance rocker arm stands mount between the shaft and cylinder head for the correct rocker arm mounting position. These rocker arm stands are quality-made for a lifetime of service.
( 15 )
$62.99
PRW Gold Series flexplates are engineered to handle extreme duty applications and designed to endure the punishment of modern high horsepower engines. The 4mm thick centerplate provides a solid foundation for these direct bolt-on drivetrain components. Ring gears are precision double-welded, utilizing robotic machinery and cold-welding processes for added durability. These flexplates are rigorously inspected throughout the manufacturing cycle to ensure you receive the expected quality. They are available in a wide variety of configurations to precisely match your application. Raise the bar on your high performance vehicle with PRW Gold Series flexplates. Order the style recommended for your specific vehicle and engine size. Features and specs: * Designed to fit standard OEM, aftermarket replacement, and high performance torque converters * SFI 29.1 certified * Forged one-piece steel ring gears * 0.035 in. thicker than stock flexplates * Constructed from cold-rolled chromoly steel * Long lasting yellow zinc plated finish
( 40 )
$103.18
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
