Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CADILLAC BROUGHAM Engines & Components
Showing In Stock Items. Show All 51 Items.
Melling Shark Tooth Oil Pumps
Smoother, tighter, and quicker--Melling Shark Tooth oil pumps utilize helical asymmetrical technology to improve the heartbeat of the traditional internal gear pump. The use of this new gear design feeds your engine an increased flow of oil without the usual pulsing. How much more? About 10 to 25 percent more volume! Equip your setup for a powerful bite of high performance; install one of these Melling Shark Tooth oil pumps. Melling Shark Tooth pumps are: * Smoother--significant reduction in pressure ripple (pulsing) also means a reduction in torque ripple in pump drive, improved distributor operation, a reduction in spark scatter, and improved distributor gear wear and intermediate shaft wear * Tighter--improved sealing of gear tips to housing provides reduced internal leakage and improved efficiency and performance * Quicker--increased inlet vacuum equals faster primes
( 43 )
$148.99
—
$200.99
Melling High-Volume Oil Pumps
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 361 )
$145.99
—
$206.99
Lokar Flexible and Machined Engine Dipsticks
Lokar's flexible and machined engine dipsticks are designed to coordinate with their flexible transmission dipsticks. The slim design allows for an easy installation inside of your headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without tube), depending on your application. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil.
( 354 )
$102.95
Clevite H-Series Main Bearings
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 139 )
$101.99
—
$111.99
Lokar Midnight Series Flexible Engine Dipsticks
Lokar Midnight Series flexible engine dipsticks are designed to coordinate with Midnight Series flexible transmission dipsticks. Their slim design allows for the easy installation inside of headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without a tube), depending on your application needs. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil. Order the model recommended for your vehicle year/make and engine family.
( 111 )
$113.95
Chevrolet Performance Engine Oil Pans
Swap out your old engine oil pan with a quality replacement from Chevrolet Performance. They are manufactured from durable steel or aluminum and have a black painted or natural finish. Available for different sizes and styles of engines, Chevrolet Performance parts are sure to keep the engine oil in the pan, where it belongs.
( 48 )
$229.99
Proform Super-Street Roller Rocker Arms
These Proform Super-Street roller rocker arms will help rid your engine of internal friction. They feature a race-proven, cage bearing fulcrum and roller tip. The Super-Street rocker arms not only unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. Proform rockers are precision-machined to ensure consistency and ratio accuracy, and they have a great looking anodized finish.
( 127 )
$190.99
—
$245.99
King XP-Series Coated Main Bearings
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 7 )
$111.99
—
$141.99
Clevite Coated H-Series Main Bearings
Clevite coated H-Series main bearings were developed primarily for NASCAR racing, but are also well-suited to other types of competition engines. They are especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. These H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. Clevite H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They come with 180 degree oil grooves, and can be ordered with an extra 0.001 in. of clearance if needed.
( 4 )
$149.99
PRW Sportsman Steel Roller Tip Rocker Arms
PRW Sportsman steel roller tip rocker arms are an ideal choice for a significant cross-section of engines. Anything from a mild street rebuild to the performance demands of off-track, Circle Track, and drag racing. These 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts. They're much stronger than stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing from the valve stem pushing forcefully against the valve guide. This reduces friction and frees up an additional 15 to 30 hp over stock models. PRW Sportsman steel roller tip rocker arms are an excellent performance alternative to stock rockers. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Rated at 350 lbs. open spring pressure * Heat-treated pivot balls
( 32 )
$150.64
—
$204.78
PowerBond Premium OEM Replacement Harmonic Balancers
PowerBond Premium replacement harmonic balancers offer high-quality for the professional engine rebuilder or shade tree mechanic. Featuring a spheroidal graphite iron casting which is considered near-steel strength material, they use both inserted and pressure-bonded rubber that produces rubber strength that is stronger than competitive balancers. PowerBond Premium replacement harmonic balancers are available for the most popular passenger cars, light commercial trucks, and 4WD applications.
( 214 )
$128.99
COMP Cams Magnum Hydraulic Camshafts
Designed for hot street/strip cars, COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic camshafts provide maximum top-end performance for your high performance car.
( 60 )
$226.95
Cloyes Z Series Replacement Timing Chains
Cloyes Z Series replacement timing chains are made from high-strength steel using a proprietary heat-treated process. The fine blanked links reduce stress risers, thereby limiting fractures under severe loads. The press-fit center links improve load share by reducing load spikes on any single component and providing greater overall strength. Order the replacement timing chain designed for your vehicle and engine application.
Not Yet Reviewed
$119.99
Proform Stamped Roller Tip Rocker Arms
Proform stamped roller tip rocker arms the affordable way to reduce internal valvetrain friction and valve stem wear. They feature an extra-long slot that eliminates rocker-to-stud interference when using high-lift cams, and are available at a fraction of the cost of similar rockers.
( 9 )
$102.99
—
$104.99
Melling M-Select Class 3 Camshafts
Here's a great camshaft for street/strip--Melling M-Select Class 3. These OE-style replacement camshafts offer good mid to high-rpm torque and horsepower with rough idle quality. They are perfect additions with your improved carburetor, exhaust, and ignition systems. Be street-smart and strip-savvy with M-Select Class 3 camshafts from Melling.
( 9 )
$133.99
—
$171.99
Proform Stamped Steel Rocker Arms
These Proform stamped steel rocker arms are designed for use when a roller tip is not required. Featuring proven OEM quality, their extra-long slot eliminates rocker-to-stud interference when using high-lift cams.
( 7 )
$121.99
Melling M-Select Class 2 Camshafts
Melling M-Select Class 2 camshafts are perfect for any ride. They have good idle quality, low-rpm torque, and mid-range performance. These cams will work with stock or slightly modified engines with manual or automatic transmissions. Order the model designed for fitment on your vehicle.
( 25 )
$121.99
—
$164.99
Lokar Midnight Series Anchor-Tight Locking Flexible Engine Dipsticks
Lokar Midnight Series Anchor-Tight locking flexible engine dipsticks feature a locking mechanism that prevents the expulsion of the dipstick handle under pressure. They also feature a PTFE-lined, black stainless steel braided outer housing, a flexible inner dipstick cable to measure oil levels, and a black anodized handle and fittings to match the outer cable jacket finish. Whether you're using stock exhaust manifolds or installing a set of headers, Lokar Midnight Series Anchor-Tight locking flexible engine dipsticks are guaranteed to keep your dipstick handle locked in the correct position. Order the model recommended for your vehicle year/make and engine application.
( 28 )
$163.95
VEGE Remanufactured Cylinder Heads
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 43 )
$249.99
Hastings Claimer Series Performance Piston Ring Sets
Hastings Claimer Series Performance piston ring sets are for builders wanting value without sacrificing precision and performance. They start with top rings made from proprietary shell-mold cast iron with plasma moly impact-resistant alloy, providing a hard, yet lubricating, low-friction structure. The plasma moly coating improves wear resistance, reduces scuffing, traps lubricating oil, and is compatible with a wide range of cylinder bore materials. The 2nd rings are manganese phosphate coated. Claimer moly top rings are torsional positive twist and the 2nd rings are torsional reverse-twist taper face. Completing the set of Moly Claimer Performance rings are Hastings Flex-Vent oil rings that minimize friction, improve flexibility, and provide high-rpm oil control.
( 13 )
$109.99
—
$133.99
Mr. Gasket Chrome Engine Bolt Kits
Mr. Gasket's chrome engine bolt kits contain all of the bolts that you need for your engine. These bolts feature a beautiful chrome finish for a show-ready look.
Not Yet Reviewed
$215.95
Cloyes Hex-A-Just Timing Sets
With Cloyes Hex-A-Just timing sets, infinitely adjustable cam timing is as simple as turning an Allen wrench. Consisting of SAE 1144 billet steel cam and crank sprockets and a true roller timing chain, these timing sets use a special hex-head bushing installed on your cam's dowel pin. This bushing lines up with degree marks on the cam sprocket. You can adjust timing in fractions of a degree (as much as +/-6 degrees) by loosening the cam bolts and turning the bushing with an Allen wrench. Cloyes Hex-A-Just timing sets install under your stock timing cover and can be used in align-bored blocks. Order the model designed for your vehicle and engine application.
( 34 )
$176.99
—
$204.99
Cloyes Race Billet True Roller Timing Sets
Cloyes Race Billet True Roller timing sets provide race-ready performance! These sets feature sprockets machined from premium billet steel on state-of-the-art CNC equipment to ensure the highest quality and consistency. The sprockets are induction-hardened and oil-quenched by Cloyes' in-house, multi-stage heat treat process. Sets include a Cloyes Premium True Roller chain—which features full roller action and superior strength. Side plates are cut and shaved from high-strength steel and are heat-treated for maximum fatigue resistance. Their .250 in. rollers are cold-rolled and hardened to exacting standards, increasing load and rpm capabilities. Cloyes Race Billet True Roller Speed Sets are offered with a choice of 3-or 9-keyway crank sprockets, providing multiple valve timing settings. These sets are hand-matched to qualify center distance and runout, ensuring the best performance with every set!
( 100 )
$128.99
—
$136.99
Melling Timing Chain Sets
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$119.99
