Availability
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 37 )
$549.95
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 435 )
$54.45
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1950 )
$118.95
—
$276.95
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$349.95
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 430 )
$65.75
—
$79.09
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 640 )
$61.35
—
$599.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 619 )
$699.95
$54.97
—
$749.95
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
Finally, all-out performance distributors to replace the OEM GM LT1 Optisparks--MSD's Pro-Billet LT1 distributors. They feature a precision-machined billet aluminum housing that fits in place of the factory piece, a new pickup assembly, a trick timing adjustment mechanism, and a new MSD distributor cap and rotor. The pickup is an advanced optical encoder that has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft, and is stabilized through the use of a large ball bearing assembly. The distributors use an adjustment screw to advance or retard the timing by up to 5 degrees.
( 64 )
$799.95
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 36 )
$122.95
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
—
$330.95
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 512 )
$49.95
—
$126.95
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for Gen V LT engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the RPM stays at a consistent level, producing consistent launches.
( 6 )
$361.95
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 196 )
$52.69
—
$72.69
MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.
( 20 )
$399.95
MSD Ultimate HEI kits have everything you need to turn your early model GM HEI distributor into a great performance distributor. The MSD HEI modules feature special circuitry to produce 50 percent higher coil drive currents than stock modules, resulting in higher spark energy at racing rpm. By matching the coil specifications with the modules, MSD delivers more accurate timing and dwell control. The kits also include a high-quality rotor, a durable cap with brass terminals, and even a new dust cover.
( 19 )
$399.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 239 )
$449.95
As LS engines make their way onto the race track MSD is ready with the Circle Track LS ignition controls. You're off to the races with MSD. Circle Track LS ignition controls feature: * Direct plug-in to factory GM LS sensors and coils * Preprogrammed to run the GM CT525 crate engine out of the box * Laptop programmable rpm limit, timing curve, and coil selection for custom tuning * Auto detects coils, cam sensor, and crank sensor * Will run 24x 1x, 58x 1x, and 58x 4x crank/cam sensor combinations * Self-powered with USB for laptop programming * Steady, accurate timing control * Dedicated plug for Tech Official
Not Yet Reviewed
$549.95
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 136 )
$47.77
—
$52.69
These Extreme distributor caps from MSD are replacement covers designed to be installed on stock HEI distributor cams with no modifications.
( 8 )
$86.99
MSD modified HEI dust covers allow you to remove the stock HEI coil in your distributor cap and replace it with an externally mounted coil. By going with an external coil, you increase the reliability and performance of the stock HEI system.
( 9 )
$79.09
On Sale
MSD Ignition's Multiple Spark Coils (MSC) will fit in place of the stock GM LS coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy sparks, crowned with MSD's multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!
( 26 )
$149.95
—
$1,078.95
$112.46
—
$733.46
MSD offers universal wiring harnesses to simplify the installation of a MSD 6 Series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
( 48 )
$77.15
—
$79.09
MSD Chevrolet distributor O-ring kits are designed to fit onto the lower shaft of the distributor, just above the gear. They are made of high-grade rubber and will keep the distributor shaft securely in place at operating rpm.
( 4 )
$21.05
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
