Availability
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 104 )
$2,049.95
—
$2,149.95
$1,843.95
—
$1,933.95
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$118.95
—
$172.95
$107.05
—
$155.65
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,291.95
—
$1,332.95
$1,162.76
—
$1,199.66
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 443 )
$54.45
—
$90.85
$49.05
—
$59.05
On Sale
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 218 )
$259.95
$233.95
On Sale
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$349.95
$314.95
On Sale
Edge Insight CTS3 monitors are the most comprehensive, state-of-the-art, multi-gauge touch screen display on the market. This third generation design is faster and more capable than ever. A simple installation that just plugs into an OBDII port and works on most domestic gas and diesel vehicles. They are the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle--or for those who already have significant performance upgrades and want to safely monitor their vehicle's performance. Edge Insight CTS3 features include: * 5 in. full color, 720P high-resolution, swipe screen * 1 GB of on-board Ram * High-speed data logging export * Test and track performance runs such as 0 to 60 mph and 1/4 mile * Log, graph, and export parameters to track for improved performance * Set audible and visual alert notifications when certain parameters or temperatures are met * Multiple shift-on-the-fly performance tuning settings with EAS * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge screen layouts * Fully customizable backgrounds * One-touch easy menu navigation * Notification center * Switch between US or metric units of measure * Displays dozens of parameters * Light sensitivity meter to dim screen as ambient light decreases * Wi-Fi update-able * Backup camera adaptable
( 22 )
$499.95
$448.95
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$449.95
—
$632.95
$403.95
—
$568.95
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
$266.35
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$435.95
—
$573.95
$391.95
—
$515.95
On Sale
B&M automatic StarShifters normally work like standard detent shifters, but by simply pulling the lockout trigger and moving the stick to low, they become full ratchet action shifters for quick gear changes. With a cable-operated mechanism, a universal floor-mount console, NHRA/IHRA-approved reverse lockout, a neutral safety switch, and a polished aluminum T-handle, the StarShifters are at home on the street or the track.
( 156 )
$340.95
$306.85
On Sale
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 222 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 192 )
$661.54
—
$850.54
$611.54
—
$800.54
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 152 )
$125.95
—
$465.95
$113.35
—
$302.87
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 643 )
$71.75
—
$513.95
$64.55
—
$461.95
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 433 )
$61.45
—
$79.09
$55.35
—
$71.15
On Sale
B&M truck shifters feature the classic Megashifter design, in a configuration that will fit your light truck! All of the things that you expect in a B&M shifter are right here and ready to install. The Truck Megashifters include a taller base and an adjustable floor mount bracket for proper installation.
( 57 )
$527.95
$474.95
On Sale
Do you want to move a column shifter to the floor of your project car and still retain that performance flavor? B&M Unimatic shifters are just the ticket! They look identical to a manual 4-speed shifter and, because of their cable-operated design, they can be easily installed. Like the B&M top line shifters, they include a neutral safety switch and a 5 ft. cable and a black plastic T-handle.
( 73 )
$299.95
$269.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 623 )
$83.65
—
$710.95
$54.97
—
$638.95
On Sale
ACCEL C-Cut Performance spark plugs ignite a better path to high performance for both street and strip applications. Their ground strap aligns with the centerline of the electrode to create a much-improved electrical pathway. This design reduces quenching, shrouding, and obstruction, allowing a hotter, larger flame, better firing energy, and a complete burn. Unshroud the spark to ignite your vehicle's performance; order the ACCEL C-Cut Performance spark plugs designed to fit your engine. More product features include: * Greater fuel efficiency, reduced emissions, increased performance, and better throttle response * Helps eliminate misfiring, rough idle, and overall poor performance * Copper core outperforms iridium and platinum * Machine-rolled threads protect your valuable cylinder heads * Sizes and sets available for thousands of applications
( 396 )
$23.65
—
$63.25
$21.29
—
$47.44
On Sale
B&M Pro Ratchet automatic shifters have the style and quality for professional racing, along with easy ratchet action. The Pro Ratchets have an NHRA/IHRA-approved reverse lockout that can be operated with one hand, a neutral safety switch, and a backup light switch. They work with both forward and reverse pattern valve bodies and most 3 and 4-speed transmissions. Additional installation kit required for some transmission models. Compatible with CO2 and electric shifters, these shifters include a brushed aluminum cover and a 5 ft. super-duty race cable.
( 86 )
$449.95
$403.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
