Selected Filters


Loading...

Availability


BUICK Parts and Accessories

Not Showing Customizable Items. View All Customizable Items.
Part Groups

Results 1 - 24 of 146

Tremec TKX Manual Transmissions

Specially designed for the aftermarket with universal packaging, the TKX 5-speed RWD manual transmission is a power horse for your Ford or GM restomod project. With superior shifts even at high RPMs, the TKX provides extreme durability, excellent shifting performance and a sleek casing for a customizable fit. Like all TREMEC aftermarket transmissions, the TKX is made from 100% brand-new OEM-quality components. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. * It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety * Slimmest 5-speed on the market for improved tunnel clearance

4.96 out of 5 stars ( 53 )

$2,895.99

TCI Super StreetFighter Transmissions

TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.

3.85 out of 5 stars ( 62 )

$2,895.99

—

$3,795.95

TCI StreetFighter Automatic Transmission Packages

TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.

3.28 out of 5 stars ( 18 )

$2,995.95

—

$3,495.99

Tremec T-56 Manual Transmissions

The kingpin of Tremec's high performance lineup, the T-56 Magnum double-overdrive 6-speed manual transmission, takes the very best from Tremec's current OEM technologies and pairs it with the most popular features of the TKO 5-speed. Known in its original equipment form as the 'TR-6060', the Magnum is an aftermarket version of the same transmission found in many of today's most celebrated factory super cars. Able to withstand a massive 700 lbs.-ft. of torque while providing unbelievably crisp shifts, no other manual transmission on the planet offers as much combined strength, versatility, and general ease-of-use as the T-56 Magnum. The units are available in a variety of gear ratios for different applications. Additional details: * The aftermarket's premier double overdrive 6-speed performance manual transmission * Reasonably light at 135 lbs. dry * Multiple shifter locations and dual speedo pickups for unmatched versatility * Incredibly short, extremely low-effort shift throws, with crisp, precise engagement * Modern OE supercar technology for the ultimate pro-tourers, road-racers, and more

4.2 out of 5 stars ( 10 )

$3,545.99

On Sale

Holley Super Sniper EFI Stealth 4150 Fuel Injection Systems

Holley Super Sniper EFI Stealth 4150 fuel injection systems are what you need to convert your vehicle to fuel injection. Holley Super Sniper Stealth 4150 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Compatible with draw-through or blow-through forced induction applications * 2 Bar MAP sensor * Integrated ignition timing control * -6AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0-5 V sensors, one sensor ground supply for 0-5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-886 is recommended * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit for 2.250 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange

5.0 out of 5 stars ( 4 )

$2,249.99


$2,023.95

TCI StreetFighter Transmissions

TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.

3.45 out of 5 stars ( 146 )

$2,495.99

—

$3,495.99

Ridetech Ridepro E5 Air Ride Suspension Control Airpod Dual Compressor Systems

Ridetech Ridepro E5 Air Ride Suspension Control Airpod dual compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, Ridepro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, Ridepro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the Ridepro E5 app. Ridetech Ridepro E5 Airpod systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum Airpod 5-gallon tank * Ridepro E5 digital control * Dual compressors * 1/4 in. valves * Perfect for vehicles over 3,500 lbs.

1.0 out of 5 stars ( 2 )

$2,865.00

Wilwood Forged Narrow Superlite 4R Big Brake Rear Parking Brake Kits

Wilwood Forged Narrow Superlite 4R Big Brake rear parking brake kits are the perfect addition to front Big Brake upgrades for incredible stopping power. These disc brake kits feature FNSL4R 4-piston oversize forged billet aluminum calipers, 13 or 14 in. 2-piece premium rotors, and high performance BP-10 compound pads. Also included is a high-quality, drum-style parking brake assembly. The neatly hidden internal shoe system provides a clean installation, with superior static holding power for parking. Wilwood Forged Narrow Superlite 4R Big Brake rear parking brake kits provide the extra power to reel in your beast. Order the kit designed for your vehicle application.

4.69 out of 5 stars ( 29 )

$2,216.99

Silver Sport EasyFit Tremec TKX Transmission Kits

Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty

4.0 out of 5 stars ( 8 )

$4,195.99

—

$4,295.99

Edelbrock E-Force Supercharger Kits

Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.

3.8 out of 5 stars ( 10 )

$3,995.99

Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kits

Wilwood forged narrow Superlite 6R Big Brake front brake kits upgrade your late model ride with increased brake capacity and complimentary style. They're application-specific for a simpler installation and offer full compatibility with OE master cylinder output and ABS functions, where used. These front brake kits feature the extremely durable and efficient body design of their forged narrow 6-piston radial mount calipers. You can choose from optional caliper finishes and rotor designs to meet your personal style and braking requirements. Don't just replace—upgrade to generate big stopping power with Wilwood forged narrow Superlite 6R Big Brake front brake kits.

4.76 out of 5 stars ( 109 )

$2,354.40

—

$2,957.66

Edelbrock E-210 Cylinder Heads

Step up to race-level performance with OEM compatibility using these Edelbrock E-Series E-210 aluminum cylinder heads. They feature larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts--perfect for spec series racers and large-displacement engines. Available bare or assembled, E-210 cylinder heads allow you to use off-the-shelf headers and hardware. Forget those overseas castings; go with quality, economy, and performance. Go with Edelbrock E-Series E-210 cylinder heads.

4.92 out of 5 stars ( 13 )

$2,168.99

—

$2,274.99

On Sale

Holley Sniper EFI Stealth 4500 Fuel Injection Systems

Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange

4.25 out of 5 stars ( 4 )

$2,299.99


$2,068.95

Ridetech Ridepro E5 Air Ride Suspension Control Dual Compressor Systems

Ridetech Ridepro E5 Air Ride Suspension Control dual compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, Ridepro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, Ridepro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the Ridepro E5 app. Ridetech Ridepro E5 systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 5-gallon tank * Ridepro E5 digital control * Two Thomas compressors * 1/4 in. air lines and fittings * Perfect for vehicles over 3,500 lbs.

Not Yet Reviewed

$2,665.99

Edelbrock Total Power Package 435 HP Small Block Chevy Top-End Engine Kits

The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

4.43 out of 5 stars ( 7 )

$4,016.99

—

$4,285.99

UMI Performance Stage 2 Handling Kits

UMI Performance Stage 2 handling kits will make any classic cruiser feel like a modern day muscle car! They are designed to bring you superior ride quality and improved handling, while giving you the lowered, aggressive stance you're looking for. These kits include everything you need to rebuild the suspension on your classic ride, such as upper and lower front A-arms, heavy-duty UMI sway bars with new end links, greaseable bushings, Bilstein HD shocks, UMI lowering springs, rear tubular upper and lower control arms, replacement rear end housing bushings, and heavy-duty tubular frame braces. UMI Performance Stage 2 handling kits are made of superior-quality materials to ensure long-lasting durability and performance. These UMI Performance Stage 2 handling kits are perfect for the weekend warrior looking to go for a back road cruise, perhaps hit the drag strip, or even an Auto-x.

4.57 out of 5 stars ( 7 )

$3,059.99

—

$3,259.99

TCI Heavy-Duty RV Transmissions

For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.

3.67 out of 5 stars ( 3 )

$2,695.99

—

$3,295.95

QA1 Level 1 Full Vehicle Handling Suspension Kits

Seeking improved stance, along with ride quality and handling? Turn to QA1's handling suspension kits for a full-vehicle upgrade that fits your needs. Available in three different levels of performance, these kits offer easy, bolt-in installation (some welding may be needed) and seamlessly work with whatever OE component each piece attaches to. And with different levels, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. QA1 Level 1 handling kits deliver everything needed in one shot, taking the guesswork out of the process. These full-vehicle upgrades are designed to boost performance while giving you steady, reliable comfort. All QA1 handling suspension kits are offered with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you need. Select the kit designed for your vehicle.

1.0 out of 5 stars ( 1 )

$2,190.99

—

$2,299.99

UMI Performance Stage 2.5 Handling Kits

UMI Performance Stage 2.5 handling kits bring you the best of both worlds—combining UMI's Stage 2 handling kit with four-corner Viking coilover ride height adjustability. These Stage 2.5 handling kits feature UMI's most popular combination of front and rear springs, along with all the necessary components and hardware needed to transform your GM vehicle for improved handling, ride quality, and an impressive stance. Ride height is adjustable from stock to 2 in. below stock ride height, and the Viking shocks feature 19 settings in both compression and rebound. More than a dozen kits are available, with numerous options. Select the model recommended for your vehicle. Stage 2.5 handling kits include: * Tubular lower front A-arms with polyurethane bushings * Upper front A-arms with Delrin© bushings * Viking coilover kit * Heavy-duty front sway bar with new bushings and end-links * Front upper and lower race-quality hardware kit * Solid heat-treated rear sway bar * Tubular rear lower control arms with polyurethane bushings * Tubular rear upper control arms with polyurethane bushings * Tubular frame braces with hardware * Replacement rear-end housing bushings * Rear control arm race-quality hardware kit * UMI bolt-on rear coilover kit * Thrust bearing kit (x 2) * Spanner wrench kit Note: Rear coilover kit fits GM axle housing only. Aftermarket axle housing fitment is not guaranteed.

Not Yet Reviewed

$4,369.99

—

$4,649.99

Ridetech Narrowed 4-Link Axle Assemblies

If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member

5.0 out of 5 stars ( 1 )

$2,175.99

—

$2,275.99

Detroit Speed Stainless Steel Long Tube Headers

Detroit Speed stainless steel long tube headers feature a 1 7/8 in. primary tube diameter for LS engines or 1 3/4 in. for standard SBC engines. They are manufactured from durable stainless steel and use 4-way inline merge collectors featuring V-band clamps to attach the exhaust. The headers are designed for performance, maximum ground clearance, and have oxygen sensor bungs in each of the collectors.

Not Yet Reviewed

$2,999.99

QA1 Level 2 Full Vehicle Handling Suspension Kits

QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.

5.0 out of 5 stars ( 14 )

$2,016.99

—

$3,609.99

Richmond Gear Super Street 5-Speed Transmissions with Overdrive

Richmond Gear Super Street 5-speed transmissions feature a 5-speed design with overdrive that can handle up to 600 ft.-lbs. of torque. Based on the successful Richmond NASCAR-type design and technology, they are manufactured using the best in CNC machining, gear-cutting technology, and race-proven in-house treating. These transmissions include a long shifter for the ultimate in shift performance and durability. Available for Ford or GM applications, Richmond Gear Super Street 5-speed transmissions will make an excellent addition to your vehicle.

3.6 out of 5 stars ( 5 )

$4,619.99

Edelbrock Total Power Package 410 HP Small Block Chevy Top-End Engine Kits

The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

4.22 out of 5 stars ( 9 )

$3,638.99