Availability
Showing In Stock Items. Show All 35 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$118.95
—
$172.95
$107.05
—
$155.65
On Sale
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 216 )
$259.95
$233.95
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
$266.35
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 152 )
$125.95
—
$259.95
$113.35
—
$171.95
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$160.95
—
$263.15
$129.95
—
$179.95
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
$201.46
On Sale
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 36 )
$122.95
$110.65
On Sale
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 273 )
$229.99
—
$239.99
$213.89
—
$223.19
On Sale
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
$160.15
On Sale
DiabloSport AFM disabler devices allow for maximum power and vehicle performance by disabling the factory Active Fuel Management (AFM) feature that drops cylinders and reduces power. They are compatible with GM vehicles built from 2005 to current that have AFM. With an easy installation--just plug them into the OBDII port under the dash and drive--you can eliminate hesitation on acceleration and the annoying exhaust buzz caused by AFM activation. You can stay in V8 mode at all times without reprogramming or re-flashing the vehicle's onboard computer (ECU).
( 58 )
$249.95
$224.95
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$223.85
$201.46
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$126.95
—
$274.95
$114.25
—
$247.45
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
—
$290.35
$103.45
—
$159.95
On Sale
Range Technology Auto Stop/Start disabler devices end the annoying engine stop and restart at lights. And they are fast and easy to setup. Simply plug the disabler into your onboard OBD-II port and it instantly begins working to eliminate the Auto Start/Stop system. Benefits and features of Range Auto Stop/Start disablers: * No special tools needed to install or remove/uninstall * Patented technology will disable Start/Stop without reprogramming your ECU * No more hesitation when restarting after stopping in traffic * Saves on costly repair bills in the future by turning off Start/Stop * Safe and reversible to use; leaves no trace--unplug it to return to factory settings
( 25 )
$249.95
$224.95
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 622 )
$155.95
$101.95
On Sale
Give some more spark to your ignition system using these Professional Products LSX high performance coil packs. They provide a maximum voltage of 40 kV and the longest spark duration available. The coil packs fire 1/8th as many times as the old single coil systems, providing eight times as long for the coil to regenerate power for the next spark. On multiple coil setups like these LSX high performance packs, longer spark duration is highly desirable to ensure that 100 percent of the intake charge is ignited—for maximum power throughout the entire rpm range.
( 20 )
$129.99
—
$185.99
$116.99
—
$167.39
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 302 )
$117.75
$105.98
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 45 )
$172.95
$155.65
On Sale
Holley spark plug wires will energize your project! They offer a variety of styles and configurations for countless vehicles from the 1990s and up. The wires are available assembled or cut-to-fit. Whether you're looking for high-temperature protection, race, street, motorcycle, or stock replacement, Holley has the right spark plug wires to match your needs—and supply the juice you desire. Order the set recommended for your application.
( 14 )
$187.95
—
$199.95
$103.95
—
$179.95
On Sale
ACCEL 8.8mm spiral wire sets are custom-tailored for true street/strip performance use. They feature oversize 8.8mm ultra performance wires and spark plug boots, double silicone construction with a fiberglass braid, and a spiral-wound steel core conductor. The sets are available with distributor terminal ends and spark plug boot end options for fitment on a variety of specific applications. If you're looking for excellent ignition performance for your street/strip ride, order the ACCEL 8.8mm spiral wire set designed for your vehicle.
( 5 )
$166.95
—
$172.95
$108.95
—
$155.65
On Sale
ACCEL SuperStock 5000 Series spark plug wire sets are available in many sizes, styles, and colors to cover most any needs and vehicles. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The result is higher performance through improved efficiency, quicker throttle response, and reduced emissions. The wires feature silicone construction and are rated for 450 to 550 degrees F (depending on the set). The wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Choose your set.
( 51 )
$112.95
$101.65
On Sale
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 70 )
$126.95
$114.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
