BUICK ROADMASTER Gaskets & Seals - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Summit Bucks

Fel-Pro Engine Gasket Kits

Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.

4.66 out of 5 stars ( 555 )

$112.99

—

$168.99

ACDelco Rear Main Seal Housings

ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.

4.5 out of 5 stars ( 8 )

$122.99

SCE ICS Titan Copper Head Gaskets

With their built-in integral combustion and coolant seals, patented SCE ICS Titan copper self-sealing head gaskets require no additional sealants. That means that you get user-friendly installation, combined with reliable fluid sealing, plus the unbeatable strength of solid copper gaskets. The fluid seals are bonded to both sides of the gaskets and cleverly offset to allow the annealed copper of the gaskets to deform around them for a better seal and to prevent blowout. The built-in combustion seals, found only on the ICS Titan gaskets, take the place of the O-ringed blocks or heads, allowing for the use of power adders or extreme static compression ratios. The gasket body is split at the bore opening to allow for the insertion of a stainless wire O-ring, forming a primary seal, with upper and lower flanges forming a secondary combustion pressure seal. Recommended for naturally aspirated gas or methanol racing engines, these one-of-a-kind copper ICS Titan head gaskets are suitable for medium-to-heavy turbocharged, blown, or nitrous-injected engines as well. For ultimate sealing strength every time, introduce your engine to SCE ICS Titan copper head gaskets.

4.38 out of 5 stars ( 8 )

$121.49

—

$216.43

Summit Bucks

Fel-Pro Head Gasket Sets

When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)

4.68 out of 5 stars ( 373 )

$186.99

Mahle Original Engine Gasket Sets

Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.

3.67 out of 5 stars ( 24 )

$104.99

—

$198.99

SCE Pro Copper Head Gaskets

Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.

4.0 out of 5 stars ( 19 )

$107.50

—

$116.82

SCE Titan Copper Head Gaskets

With their built-in oil and coolant seals, patented SCE Titan copper self-sealing head gaskets require no additional sealants. That means you get user-friendly installation, combined with reliable fluid sealing, plus the unbeatable strength of solid copper gaskets. The fluid seals are bonded to both sides of the gaskets and cleverly offset to allow the annealed copper of the gaskets to deform around them for a better seal, especially in the O-ring combustion-seal area. Recommended for liquid-cooled racing engines with O-rings in the heads or block, these one-of-a-kind copper head gaskets can even be used on street machines with no worries about coolant leaks! For perfect sealing strength every time, introduce your engine to SCE Titan copper head gaskets.

4.83 out of 5 stars ( 6 )

$101.84

—

$148.36

SCE MLS Spartan Head Gaskets

SCE MLS Spartan head gaskets are strong, simple to use, and ready for battle. These multi-layer stainless steel (MLS) gaskets feature fluid sealant coating applied to all inner and outer gasket plates. This proprietary method provides a continuous, unbroken coating that seals up to 60RA surface finishes on block and heads, and a superior cold seal. Choose the model designed for your vehicle. SCE Spartan head gaskets, with their advanced manufacturing, delivers trouble-free, bolt-on performance without extra sealants.

3.67 out of 5 stars ( 3 )

$100.36

—

$148.32

Cometic MLS Head Gaskets

Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.

4.65 out of 5 stars ( 563 )

$121.04

—

$235.73

SCE AccuSeal Pro Rear Main Seals

SCE AccuSeal Pro rear main seals are made from top-quality Viton® material known for its excellent heat and chemical resistance. These one- or two-piece replacements are available for a wide range of vehicles from the 1950s and up. Count on SCE AccuSeal Pro rear main seals for dependable, leak-free performance!

4.36 out of 5 stars ( 11 )

$215.99

SCE AccuSeal E Intake Gaskets

Your budget doesn't need to take a hit every time you buy gaskets; and no, you don't need to sacrifice quality. SCE AccuSeal E Series is their common-sense gasket line for engine builders, racers, or weekend warriors who want a better gasket as a reasonable price. These SCE AccuSeal E intake gaskets hold up under high temperatures and pressures, plus they are available in extra thicknesses to provide sealing answers to your questions. SCE AccuSeal E gaskets offer economy and performance for you and your wallet.

3.96 out of 5 stars ( 54 )

$147.85

—

$184.40

SCE AccuSeal Pro Intake Gaskets

When you need a professional seal, choose SCE AccuSeal Pro gaskets. These premium gaskets are made with proprietary materials and processes to provide you with the seal that you want, need, and expect. These AccuSeal Pro intake gaskets feature silicon bead seals with one third of the clamp load of other brands, making them handy on angle-milled heads! Get the sealing power needed for the top performance of your race or street engine with SCE AccuSeal Pro gaskets.

4.22 out of 5 stars ( 49 )

$156.14

—

$224.79

SCE AccuSeal E Dyno-Paks

SCE offers AccuSeal E Dyno-Paks for countless year/make and engine applications, from the early 1950s and up. These exhaust header and manifold gaskets are made from graphite/Kevlar® for nearly a dozen port styles—in different heights and widths. The seals come in sets of 10, so you'll always have a fresh supply on hand. Order the Dyno-Pak recommended for your vehicle. Additional product details: * Designed for exhaust header/manifold high-temperature and pressure usage * Kevlar® and graphite combination provides extreme heat resistance, strength, and durability * Resists blowout and burnout from exhaust high-temperature and pressure * Good adaptability to seal header/manifold flange irregularities * Can be trimmed easily for modified port applications. * Permits easy removal of gasket for engine service

Not Yet Reviewed

$153.71

SCE AccuSeal Pro Dyno-Paks

SCE offers AccuSeal Pro Dyno-Paks for countless year/make and engine applications, from the early 1950s and up. These exhaust header and manifold gaskets are made from steel and graphite for a dozen port styles—in different heights and widths. The seals come in sets of 10 pairs, so you'll always have a fresh supply on hand. Order the Dyno-Pak recommended for your vehicle. Additional product details: * Designed for extreme exhaust header/manifold high-temperature and pressure usage * Perforated steel core provides superior strength, durability, and fastener torque retention to eliminate gasket failure * Graphite facing applied to both sides of core provides extreme heat resistance to prevent blowout and burnout * Good adaptability to seal header/manifold flange irregularities * Permits easy removal of gasket for engine service

Not Yet Reviewed

$184.40

—

$190.15