Availability
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 105 )
$10.99
—
$20.99
Continental molded bypass hoses feature a Versigard rubber tube and cover to resist heat, oil, and weather. Their Tylanar-knit reinforcement meets or exceeds SAE J20R3, D1 specifications.
( 43 )
$11.99
—
$16.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$13.99
—
$21.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 441 )
$11.99
—
$25.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 259 )
$15.95
If you have a hole in your radiator hose, replace it with Dayco flexible radiator hoses. Designed to replace straight or molded radiator hoses, these precision-corrugated hoses feature knitted reinforcement and synthetic EPDM construction combined with an inserted helical steel coil spring. The Dayco design provides excellent flexibility without flattening or collapsing, as well as the ability to resist splitting, ballooning, environmental elements, coolants, and temperature changes. Dayco flex radiator hoses are available in a selection of sizes to keep your coolant flowing.
( 164 )
$10.99
—
$19.99
Dorman keeps your brake system connected with their wide selection of OEM replacement brake hoses. These rubber hoses deliver increased performance and reliability and are available for most specific vehicle applications. Dorman brake hoses are fully assembled, and those with banjo end fittings include new copper washers to ensure proper sealing. All hoses are tested up to 4,000 psi to ensure that safety standards are met. Don't wait for your hose to bulge or burst--order Dorman hydraulic brake hoses for consistent performance from your brake system.
( 288 )
$10.99
—
$20.99
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 57 )
$13.99
—
$24.99
OER fuel and brake line clip sets contain the correct clips for attaching fuel and brake lines to the frame on various GM models. Clips are made of galvanized steel and designed to accept one 3/8 in. and one 1/4 in. steel fuel line, or one steel brake line. Don't need a set? OER clips are also available individually.
( 2 )
$17.99
ACDelco Gold brake hydraulic hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each hose contains double crimped fittings to provide longer service life and durability. These Gold brake hydraulic hoses are high-quality replacement components for your vehicle's braking system. Order the model recommended for your application.
( 27 )
$10.99
—
$21.99
ACDelco GM Genuine Parts PCV valve hoses are a GM-recommended replacement component for you vehicle. These original equipment hoses will provide the same performance, durability, and service life you expect from General Motors. They are manufactured to OE specification for fit, form, and function so you can expect these hoses to fit the same as they did coming off of the assembly line.
( 15 )
$11.99
—
$20.99
Make your stops shorter with new flex brake lines from The Right Stuff. Their flex lines are quality-made hoses featuring single-crimp/swage fittings. They come available in several front and rear applications, so choose the lines that will get the job done right the first time--flex brake hoses from The Right Stuff.
( 111 )
$16.99
—
$21.99
Derale Performance transmission line fittings will help you adapt your existing transmission lines to the transmission cooler. Made of durable aluminum, these fittings are corrosion-resistant for a lifetime of good use.
( 44 )
$16.69
—
$17.16
The Right Stuff brake line tees are OE replacements made from brass. Plumb your brake lines with the "right stuff"--The Right Stuff brake line tees.
( 7 )
$16.99
Raybestos Element3 hydraulic brake hoses meet federal standards to ensure performance and safety in your vehicles. These replacement lines provide exceptional durability and a longer life over competitors' hoses. Element3 hydraulic brake hoses utilize premium fittings to ensure a good seal and ease of installation. Over 1,400 models are available to service vehicles from the 1940s and up. Order the hoses recommended for your application.
( 28 )
$11.99
—
$22.99
These Dorman brake speed bleeder screws are designed to make bleeding your brakes easy. The internal check valve allows you to back the screw out, pump the brakes to bleed out old fluid or air, and then retighten them to complete the job. No air can come back into the system and, best of all, it is easy to do by yourself. You won't have to wait for someone else to help or need expensive tools any longer. Take the headache out of bleeding your next brake job with these Dorman brake speed bleeder screws.
( 40 )
$12.99
Continental heater hose E-Z coils make creating your very own molded hoses a breeze. These E-Z coils maintain a consistent I.D. through a 90 degree bend, eliminating the need for a custom-molded hose. When it comes to saving time and money, Continental has you covered with their E-Z coils.
( 5 )
$10.99
—
$12.99
Maintain proper braking with Dorman power brake booster check valves. They are built to OEM specifications and install easily in seconds. The valves are designed to ensure proper vacuum in power boosters for positive braking.
( 28 )
$10.99
Keep your classic GM's heater hoses together with heater hose retainer brackets by The Stop Shop. These original equipment reproduction brackets are manufactured to fit and function just like the originals, with the correct bends and contours and mount at the inner fenderwell on most GM models.
( 1 )
$11.99
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 123 )
$18.99
—
$21.99
Keep your ride cool and running efficiently with Dayco molded radiator hoses. These OE-style replacements feature knitted reinforcement and all-synthetic EPDM rubber construction—which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 to 257 degrees F. The inner base tube of these hoses is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses. Dayco molded radiator hoses are available in more than a thousand configurations, with dozens of length and diameter options, to achieve fitment on most any vehicle.
( 170 )
$10.99
—
$22.99
Replace your damaged OEM bypass hoses with Dayco molded bypass hoses! Designed using knitted reinforcement and all-synthetic EPDM construction, they provide the high strength and resistance to oil, salt, mud, debris, ozone, coolants, and extreme temperature variations that are required for OEM replacement hoses. Their inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses.
( 12 )
$16.99
Sunsong offers power steering hose assemblies for thousands of vehicles from the 1950s and up. The OE replacement hoses are available in a variety of materials and configurations, both in high-pressure and low-pressure options. If you've notice squealing or poor performance when you turn the wheel, you may have a worn hose leaking fluid. Maintain your system with the hose assembly recommended for your application.
( 60 )
$10.99
—
$22.99
Continental heater hoses are original equipment molded heater hoses for popular applications. The tube in Continental's universal or pre-curved molded heater hoses is made with Versigard rubber--a compound that's highly resistant to heat, oil, and weather. The patented knit reinforcement is made with Tylanar fabric--a material that meets or exceeds the requirements of SAE J20R3, D1. Additional features include: * Designed for those vehicles requiring multiple or severe bends * Original configurations to ensure a perfect fit * Fits popular applications * Rugged construction
( 26 )
$10.99
—
$20.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
