Availability
On Sale
These Quick Fuel QFX-Series carburetors feature an all-new die-cast aluminum main body, which has a lengthened venturi section for greater midrange torque and better airflow. The annular booster venturis are precision die-cast with CNC-machined billet aluminum inserts, providing smoother and more refined air entry, a stronger vacuum signal, less turbulence, and improved fuel emulsion for better combustion. The Quick Fuel QFX-Series carburetors use red anodized billet aluminum CNC-machined metering blocks featuring 3-circuit metering (gasoline carburetors), changeable emulsion, idle feed, and intermediate bowl and feed discharge. Next, the die-cast aluminum fuel bowl combines high strength with significant weight reduction. They feature dual threaded fuel inlets and outlets and dual sight glass holes to easily set the float levels. The Quick Fuel QFX-Series carburetors feature Quick Fuel's external linkage with four different links to select the amount of primary throttle opening before the secondaries open: moderate progressive (25 percent), medium progressive (40 percent), full progressive (50 percent), and 1:1.
( 7 )
$2,099.95
$1,528.95
—
$1,888.95
The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates
Not Yet Reviewed
$1,827.00
Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 3 )
$1,634.76
Nitrous Express 3-bolt plate systems for GM LS-style engines feature a billet nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive on all LS car and truck intakes with a 3-bolt throttle body. Power levels can be adjusted between 50, 100, 150, 200, 250, 300 and 350 horsepower. Order the system preferred for your setup. Systems include: * Billet nitrous plate * Choice of 5 lb., 10 lb., 12 lb., or 15 lb. aluminum bottle * Stainless steel bottle brackets * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 6 )
$1,634.76
These Nitrous Express EFI Race dual nozzle nitrous systems are designed for EFI engines looking for an extra shot in the arm. At the heart of these systems are NX's potent "Shark" nozzles, which means that they can deliver power increases from 100 to 300 hp. Best of all, these increases are in graduated increments that you can select. The kits include the nitrous bottle, mounting brackets, two nozzles, nitrous supply hoses and fittings, solenoids, switches, wiring, jets, and mounting hardware.
Not Yet Reviewed
$1,989.87
These Nitrous Express EFI Race single nozzle nitrous systems are great for vehicles with limited room in the engine bay, especially those with minimal hood clearance. However, despite their relatively compact nature, they don't short you on power delivery. The heart of these systems is NX's potent "Shark" nozzle, which means that they can deliver power increases from 100 to 250 hp. Best of all, these increases are in graduated increments that you can select. The kits include the nitrous bottle, mounting brackets, nozzle, nitrous supply hoses and fittings, solenoids, switches, wiring, jets, and mounting hardware.
Not Yet Reviewed
$1,534.03
—
$2,246.45
Injector Dynamics ID2600x fuel injectors are developed specifically for use with liquid fuels, featuring corrosion-resistant internals, and long-term compatibility with ethanol and methanol. ID2600-XDS fuel injectors have the highest flow rate of any injectors offered by Bosch and flows 50 percent more than the ID1700x units. Injector Dynamics ID2600x fuel injectors feature Dual Slope Matching, a method of matching the flow rate in both the linear and nonlinear operating range, to provide better cylinder-to-cylinder consistency at low pulse widths.
Not Yet Reviewed
$2,173.50
Dorman turbochargers head units restore drivability, as well as engine power and/or efficiency. These turbocharger and gasket kits are offer as direct replacements for the best possible fit and function in a wide number of applications. They are quality engineered from durable materials to eliminate grinding, whining, and other noise-related issues you would experience due to a faulty turbocharger. Dorman turbocharger and gasket kits include installation components, and on-vehicle testing was conducted to ensure trouble-free operation in your vehicle.
( 20 )
$1,657.95
If you are looking for a cost-effective turbo that can still make a lot of power, Precision Turbo and Engine Gen1 turbochargers are right up your alley. They are available in a variety of housing options, so you can spec out the perfect turbo for your vehicle. The Gen1 units are great for diehard racers or a daily driver looking to increase performance.
Not Yet Reviewed
$1,639.72
—
$1,801.21
Precision Turbo and Engine Gen2 turbochargers are ideal for the diehard racer or the daily driver looking to boost their performance. Each Gen2 turbocharger has a compressor wheel machined from 2618 aluminum forging and multiple turbine housing options are available. Precision customers have a history of setting records and being noticed--not just sitting in the stands watching the action. Get involved and be a part of the action with their Gen2 turbochargers!
( 1 )
$1,931.83
—
$2,127.25
Detroit Speed stainless steel narrowed fuel tanks are specifically designed for use with the Detroit Speed mini-tub kit. They are a direct bolt-in using the original mounting location and may stainless steel fuel tank straps for installation. The fuel tanks are manufactured from high-quality, durable stainless steel and are baffled and pressure-tested to ensure great reliability. They are available for fuel injected or carbureted engines. All carbureted fuel tanks have a 1/2 in. NPT fuel pickup fitting that's compatible with either a -8 AN or -10 AN fuel line, and the fuel injected fuel tanks include a Walbro GSS340 electric in-tank pump that delivers 60 to 65 psi at 55 gph (on 13.5 V). Fuel sending units are sold separately.
( 1 )
$1,635.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
