BENTLEY T1 SERIES | Summit Racing

B&M Tork Master Torque Converters

Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.

4.42 out of 5 stars ( 199 )

$337.95

—

$382.95

B&M Holeshot Torque Converters

A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.

3.88 out of 5 stars ( 84 )

$409.95

FTI Performance ESR Series Torque Converters

FTI Performance ESR Series torque converters are designed for mildly modified vehicles. They're built using Torrington bearings, race-prepped sprague hardened impeller hub, hardened turbine hub and splines, a new steel pilot, and laser-cut mounting ring. These units are available in a variety of sizes, advertised flash stall ratings, and numerous other options. Order the torque converter recommended for your transmission application.

4.63 out of 5 stars ( 65 )

$479.00

TCI Full Manual Valve Bodies

Get maximum performance and quicker ETs with these TCI full manual valve bodies. They're engineered to allow full manual control of the valve body, for quicker shift timing and higher line pressures. You get less clutch slippage under high load, so that more power gets to the ground. They're a great choice for bracket cars, monster trucks, and virtually any off-road competition vehicle where a transbrake is either illegal or undesirable.

4.59 out of 5 stars ( 59 )

$262.95

—

$301.95

TCI Transmission Pans

Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks

4.2 out of 5 stars ( 187 )

$265.95

TCI PRO-X TH400 Aluminum Tailhousings

These TCI PRO-X TH400 aluminum tailhousings feature light weight and improved strength, while using a tailshaft roller bearing rather than the factory bushing for superior lubrication and durability. The OEM bushing is a common failure point with TH400 transmissions, as it can run dry in high-speed TH400 applications. The TCI PRO-X TH400 aluminum tailhousings are more rigid than other factory or aftermarket tailhousings, with increased structure for added support and durability. The use of the roller bearing provides added lubrication, and the usually unreliable paper gasket used to seal the housing to the transmission is replaced with a precision-machined surface that incorporates an O-ring for a solid, drip-free connection. Build a stronger transmission and have better reliability with one of the TCI PRO-X TH400 aluminum tailhousings.

5.0 out of 5 stars ( 4 )

$288.95

ATP Automatic Transmission Master Repair Kits

ATP automatic transmission master repair kits enable you to conveniently rebuild and restore performance. They include everything needed to give your transmission new service life—including clutch plates, gaskets, seals, O-rings, and (depending on your application) they may include an oil filter, bushings, or even a vacuum modulator. If you have transmission work to perform, let the pros at ATP furnish the master repair kit designed for your model.

4.31 out of 5 stars ( 45 )

$310.99

PerTronix Ignitor® Solid-State Ignition Systems

PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.

4.64 out of 5 stars ( 1011 )

$396.41

—

$416.17

Pioneer Automatic Transmission Super Kits

Pioneer automatic transmission Super Kits are available for a variety of applications. These rebuild kits furnish all of the seals, gaskets, filters, bushings, bands, and other components needed to overhaul specific transmissions. The parts repair both internal and external leaks, while eliminating slips and shudders, restoring shift performance. Super Kits also include both friction and steel clutch plates. Assembling all of the small parts you'd need for a transmission rebuild would be a time-consuming and frustrating task. Everything you need is packaged together here for you. Order the kit recommended for your vehicle and transmission.

3.6 out of 5 stars ( 5 )

$270.99

PerTronix Ignitor II® Solid-State Ignition Systems

Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used

4.34 out of 5 stars ( 295 )

$462.28

BENTLEY T1 SERIES Parts and Accessories