Availability
Showing In Stock Items. Show All 78 Items.
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 5 )
$348.17
—
$1,793.03
South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.
Not Yet Reviewed
$891.95
—
$3,841.26
Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes
( 9 )
$124.36
—
$125.41
TransGo automatic transmission rebuild components are engineered for performance and designed for durability. These kits address nearly every gearbox problem possible through quality that only a legend in the transmission repair industry can provide. Shift that clunky machine into reliability mode with TransGo automatic transmission rebuild components. Order the kit designed to fit your specific model.
( 11 )
$40.79
—
$150.43
TransGo valve body repair kits give you the components needed to restore proper shifts and correct other problems with your automatic transmission. They will help correct cold rough shifts, downshift problems, long shifts, hard or soft shifts and lockup problems. Repair your automatic transmission with TransGo valve body repair kits.
( 8 )
$94.39
—
$128.57
If your clutch seems to be giving you the slip, Sachs Stock Replacement clutch kits are an affordable option for repair or replacement to help you restore your vehicle back to its proper operation. Sachs Stock Replacement clutch kit components are built to OEM specifications to offer the same fit, form, and function as the factory OE part for a safer, more comfortable drive. Choose the replacement clutch kit designed to fit your application needs.
( 8 )
$239.99
—
$1,046.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 372 )
$227.99
—
$833.99
Fidanza offers replacement flywheel inserts for a variety of applications. These 1050 high-carbon billet steel inserts are blanchard ground to ensure a perfect clutch disc mating surface. They're designed specifically for use with Fidanza flywheels—enabling you to easily replace a worn or damaged friction surface. Order the diameter needed for your application. Hardware is included.
( 27 )
$86.33
Replace your worn-out concentric slave cylinder with affordable Sachs Stock Replacement parts. These components are built to OEM specifications to offer the same fit, form, and function as the factory component. The concentric slave cylinder (CSC) combines the clutch release bearing and the slave cylinder to an integrated unit. As a result, the release fork between the clutch release bearing and the slave cylinder as well as the respective bearing points are not required. Assembly takes place directly on the transmission. All Sachs concentric slave cylinder components are designed to provide superior transmission shifting and dependability to help you restore your vehicle back to its proper operation. Select the model designed for your application needs.
Not Yet Reviewed
$93.99
Timken clutch pilot bearings keep the transfer of power efficient! Leaders in friction management, Timken starts with high-quality steel and ends with precision-machined pilot bearings that will provide anti-friction alignment between your transmission and clutch. Timken puts you in motion and makes you good to go with their well-made, cost-effective pilot bearings.
( 32 )
$10.99
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$348.17
—
$1,822.98
The SACHS dual-mass flywheel is the key to first-class passenger car and light commercial vehicle drivability. The driver and occupants are aware of reduced driveline and body noise and enjoy smoother travel with more pleasant gear shifts. SACHS offers dual-mass flywheels for many OE applications, so be sure to check for yours when replacing the clutch.
( 2 )
$381.99
—
$667.99
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$506.00
—
$1,409.00
South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.
( 2 )
$944.04
—
$3,841.26
FAG USA pilot bearings offer high-quality for your project. They are produced worldwide for a wide range of applications to keep the input shaft centered and drivetrain vibrations down. Choose the one you need for your vehicle.
Not Yet Reviewed
$5.99
South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$944.04
—
$3,841.26
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 239 )
$205.99
—
$614.99
Historically, the core business of LuK—an abbreviation that, in English, stands for disc and clutch makers--is clutches, their associated systems, and powertrain dampers. LuK clutch slave cylinders have a long operating life and low-friction characteristics, thanks to the special design of the central seal, with a plastic reinforcement and the use of special lubricants. LuK offers both hydraulic concentric slave cylinders fitted within the bellhousing and external slave cylinders for lever-operated throwout bearings. All automatically adjust for clutch wear.
( 56 )
$92.99
—
$131.99
The downsizing of modern passenger car engines enables reduced fuel consumption and CO2 emissions, but can also increase rotational irregularities and natural vibrations. Torsional vibrations transmitted to other components in the drivetrain diminishes comfort and may even lead to component damage, therefore effective vibration damping is essential. LuK dual mass flywheels (DMF) reliably dampen torsional vibrations in the powertrain and ensure high gearshift and driving comfort in all speed ranges. Unlike a conventional flywheel, DMFs consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated to almost completely absorb the torsional vibrations of the engine. Precisely matched to the respective vehicle, each LuK DMF enables low-speed driving and ensures lower fuel consumption, as well as reduced emissions. Order the proper size for your vehicle.
( 12 )
$369.99
—
$1,047.99
ATP automatic transmission filter kits include everything you need for a fast, efficient filter change. They include all gaskets, filters, and other components that you might require. These replacement filters are specifically designed for your transmission; therefore, improper fitment is never an issue! Order the kit recommended for your application.
( 109 )
$26.79
—
$27.99
LuK clutch master cylinders are engineered and manufactured for exact fit, optimum function, and flawless performance. They offer a large selection to fit many applications and all are made from quality materials to meet performance specifications for your vehicle. Choose LuK clutch master cylinders to restore smooth shifts.
( 35 )
$93.99
—
$156.99
SPEC Mini Twin multi-disc clutch and flywheel kits are intended for limited street, drag race, and road race applications. The Mini Twin assemblies are available in different clutch disc and flywheel materials, clamp loads, disc configurations, and diameters depending on the particular application and on the planned use the of vehicle. SPEC manufactures Mini Twin multi-disc clutch and flywheel assemblies to industry-leading .001 in. tolerances for perfect rotational properties and concentric actuation to optimize balance, drivability, and clutch life. Additional features of SPEC Mini Twin multi-disc clutch and flywheel kits: * Flywheel and track-spec hardware are included in each kit * Rebuildable by SPEC or the end-user * Replacement components are always available * Also excellent for drift, time attack, pulling, and rally
( 2 )
$1,597.50
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 43 )
$108.99
—
$134.99
SPEC Stage 3+ clutch kits are primarily intended for street use, drag racing, pulling, and autocrossing. As the flagship stage for a high-powered street or race car that requires a manageable and friendly engagement, Stage 3+ clutch kits feature carbon-graphite full-faced material that offers unparalleled life, friction co-efficient, and drivability in one package. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3+ clutch kits: * High-clamp pressure plate * Carbon semi-metallic friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 4 )
$665.10
—
$899.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
