Availability
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$140.95
—
$184.95
$126.85
—
$166.45
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
$201.46
On Sale
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
$160.15
On Sale
Spartan lockers are affordable, reliable traction. These USA Standard Gear Spartan lockers are mechanical lockers that fit into a standard differential carrier, replacing the open spider gears. They do not use thrust washers and have a revolutionary spring and pin design to make installation a snap! Spartan lockers feature high-nickel 9310 chromoly drivers and couplers for added strength. Give your vehicle great traction and save some cash. Drop in Spartan lockers for improved traction. They're available for a variety of makes and models spanning more than a half-century.
( 31 )
$255.00
—
$272.00
$229.50
—
$244.80
On Sale
Do you have a street rod, muscle car, or sport truck? Whatever your choice, Vision American Muscle 141 Legend 5 series wheels are sure to add the styling that you desire. A classic design, coupled with one-piece cast construction and a beautiful gunmetal finish, makes Vision Wheel 141 Legend 5 an all-around great wheel choice. These wheels are designed to be used with 3/4 hex head lugs or smaller. Add a set to your next project or current ride and you're sure to be pleased.
( 110 )
$160.99
$132.48
On Sale
These 57 Series Chrome Rallye wheels are the perfect choice for your classic ride. They feature a 5-hole design and have a chrome finish.
( 26 )
$169.99
$152.99
On Sale
Functional and attractive, Morimoto Sealed4 Bi-LED headlight conversions are designed to replace all 4 in. x 6 in. rectangular headlights and offers full low and high beam functionality. Built with powdercoated cast aluminum housings and UV-treated polycarbonate lenses, the heart of these headlights is powered with high-quality Nichia LEDs. In low beam, the LEDs are paired with Morimoto's advanced Kuria Optic projector lens array to efficiently distribute 2,400 lumens on the road in a properly LHD-stepped beam pattern. In high beam mode, the Sealed4 illuminates an extra set of optics, upping the overall output to 4,300 mosquito-melting lumens. Morimoto Sealed4 Bi-LED headlights come standard with H4 3-pin male inputs and should be plug-and-play on most classic cars/trucks.
( 2 )
$286.00
$228.80
On Sale
Maradyne Champion series electric fans are great for use on remote transmission coolers, oil coolers, or intercoolers. They feature a reversible motor, so they can be used as a puller or pusher type, depending on your space constraints. They use sealed motors, perfect for harsh conditions, including off-road, and they can be sprayed clean without moisture entering the motor. The Maradyne Champion series electric fans have a glass-filled nylon shroud and blade and are high-temperature and impact-resistance for harsh underhood temperatures and greater resistance to flying road debris.
( 63 )
$135.23
—
$151.89
$121.71
—
$136.70
On Sale
Vision American Muscle 141 Legend 5 Series black wheels are the perfect look for your hot rod. These wheels fit everything you've got. Old-school looks in new-school technology are yours for the taking. Go ahead and show off! You know you want to.
( 23 )
$148.99
$132.48
On Sale
Legendary Wheels offer timeless appeal and superior quality for classic car enthusiasts. They will dress your hot rod or muscle car with unrivaled style and strength to roll true and turn heads. Legendary Wheels HB45 charcoal machined wheels are a cross between the vintage A/C Cobra and the modern "Eleanor". They feature a slimmer 10-spoke design coated with a contrasting gray charcoal finish. Top the Legendary HB45s with the optional (not included) screw-on spinner to create a timeless classic. They are available in either 4- or 5-lug versions.
Not Yet Reviewed
$239.95
$215.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
$103.45
On Sale
Centerforce Performance clutch discs will work with both Centerforce I and II pressure plates. Most of them have a carbon-composite organic friction material for longevity and drivability, as well as positive engagements and excellent heat capacity. These clutch discs are designed to withstand the loadings from high-horsepower engines, but are priced for the everyday driver as well.
( 53 )
$178.95
$161.06
On Sale
Functional and attractive, Morimoto Sealed6 Bi-LED headlight conversions are designed to replace all 5.75 in. round headlights, offer full low and high beam functionality, come standard with H4 3-pin male inputs, and should be plug-and-play on most classic cars/trucks. Built with diecast aluminum housings and UV-treated polycarbonate lenses, the heart of these headlights is powered with high-quality Nichia LEDs. In low beam, the LEDs are paired with Morimoto's advanced Kuria Optic projector lens array to efficiently distribute 2,400 lumens on the road in a properly LHD-stepped beam pattern. In high beam mode, the Sealed6 illuminates an extra set of optics, upping the overall output to 4,300 mosquito-melting lumens. Morimoto Sealed6 Bi-LED headlights have a dual light-pipe DRL setup has both a high-intensity white daytime running light and a low-intensity white parking light. The 2-wire DRL/Signal input makes setup easy, and if you don't care for the DRL function, they do not have to be wired in.
Not Yet Reviewed
$314.00
$251.20
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
On Sale
Professional Products PowerForce harmonic dampers are extremely durable—and economically priced. They're built with a bonding process which adheres the elastomer to the I.D. of the inertia ring and the O.D. of the hub, utilizing a strong adhesive along with an improved elastomer to create a much stronger bond. PowerForce dampers also feature white, easy-to-read timing marks against a painted black background. Each unit is accurately balanced and closely machined for the correct fit. Dozens of models are available for applications from 1955 and up. Choose the size, material, finish, keyways, and other options recommended for your vehicle.
( 332 )
$127.99
$115.19
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
JUST WHEN YOU THINK: You've done your research and come across every last option in the 5x7 in. sealed beam LED market, these should catch your attention. While it's true there's only so many ways you can package a set of low and high beam LED-based optics into a small rectangular headlight, Morimoto's Sealed5 Bi-LED headlight conversions pull it off in the most functional and attractive setup possible. OUTPUT: In low beam mode, Nichia NCSW170C Series LEDs, paired with Morimoto's advanced Kuria Optic projector lens array, efficiently distributes 2400 lumens on the road in a properly LHD-stepped beam pattern. In high beam mode, the Sealed5 illuminates an extra set of optics, upping the overall output to 4300 mosquito-melting lumens there. DRL / SWITCHBACK: The quad-optic setup has three functions: 1) High-intensity white daytime running light. 2) Low-intensity white parking light, and 3) High-intensity amber turn signal. The switchback setup on the turn signal will automatically interrupt the white DRL, flash, and then return to white once the signal stops. The 3-wire DRL/Signal input makes setup easy. If you don't care for the DRL or turn signals, they do not have to be wired in. QUALITY: No expense was spared when designing the Sealed5. The heart of the headlight is powered with high-quality LEDs from Nichia-Japan and Philips-Lumileds. These aren't cheap emitters to begin with. Your classic car has already withstood the test of time and the UV-coated polycarbonate lens will take another couple decades worth of abuse without fading. You can feel the precision in the heavy-duty diecast housings that double as a heat-sink. A special PWM LED driver resides inside of the headlight to keep the LEDs running at their peak intensity, even during prolonged periods of use. 5X7 in. STANDARD: Designed to replace all 5x7 in. rectangular headlights, these are cross-compatible with other sizes commonly known as H5054, H6054, or HP6054. The Sealed5 offers full low and high beam functionality. They come standard with H4 3-pin male inputs and should be plug-and-play on most classic cars and trucks.
Not Yet Reviewed
$314.00
$251.20
On Sale
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 60 )
$112.95
$101.65
On Sale
Vision HD 353 Turbine Series machined face gunmetal wheels are offered in a variety of bolt patterns, diameters, and offsets to accent your ride's stance. Crafted from premium aluminum, these rims deliver strength, style, and performance. The gunmetal gray finish is contrasted with a machined face on the spokes and center hub for a subtle and classy 2-tone appearance that will make your heavy-duty truck or trailer stand out.
( 6 )
$138.99
$138.69
On Sale
Ever find yourself wishing someone made a Smoothie-style wheel in black so you didn't have to paint it yourself? Wish granted! U.S. Wheel 510 Series Smoothie gloss black wheels feature all-steel construction and a glossy black powdercoat finish. The nostalgic rims are available in a variety of widths, diameters, bolt patterns, and other fitment options.
( 48 )
$166.99
$150.29
On Sale
Centerforce I pressure plates are the original Centerforce pressure plates. They offer 30 percent more holding capacity than original-equipment clutches, while maintaining a stock pedal feel. Patented centrifugal weights on some applications yield increased clamping force. These pressure plates are recommended as the finest-quality upgrades from stock and stock-type units.
( 10 )
$262.95
—
$293.95
$236.66
—
$264.56
On Sale
It's hard to beat the look of classic sport star wheels on an American muscle car! These American Muscle 521 Nitro Series rims from Vision Wheel are constructed of lightweight aluminum alloy for corrosion resistance—and less unsprung weight results in better braking performance. The five spokes are thicker around the lugs, and they subtly step down to provide a "star within the main star" appearance. Vision's 521 Nitro wheels feature a polished finish that'll have folks admiring your classic or modern muscle car indefinitely!
( 123 )
$151.99
$146.97
On Sale
Yukon Gear & Axle spider gear kits offer better performance for your differential. Utilizing high-quality materials and better-than-OE design, Yukon spider gears get you through turns with the traction that you need. The kits are available in a variety of carrier styles and are compatible with dozens of axle models, front and rear. Improve your differential with the addition of a Yukon Gear & Axle spider gear kit.
( 69 )
$153.99
—
$277.99
$130.89
—
$236.29
On Sale
Raceline Wheels 881MC Mod machined trailer wheels feature heavy-duty A356 aluminum construction with a timeless 10-hole modular design. The wheels are highlighted by a beautifully machined finish. Select the ideal size for your trailer. Features: * Accommodates "Bearing Buddy" system * Push-through cap with contrasting embossed Raceline logo * Works with GM OEM TPMS sensors for trailer wheels * Passes or exceeds all DOT standard load ratings
Not Yet Reviewed
$199.00
—
$209.00
$179.10
—
$188.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
