Availability
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$140.95
—
$184.95
$126.85
—
$166.45
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$179.30
—
$185.65
$161.37
—
$167.08
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
—
$223.85
$190.94
—
$201.46
On Sale
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
$160.15
On Sale
Maradyne Champion series electric fans are great for use on remote transmission coolers, oil coolers, or intercoolers. They feature a reversible motor, so they can be used as a puller or pusher type, depending on your space constraints. They use sealed motors, perfect for harsh conditions, including off-road, and they can be sprayed clean without moisture entering the motor. The Maradyne Champion series electric fans have a glass-filled nylon shroud and blade and are high-temperature and impact-resistance for harsh underhood temperatures and greater resistance to flying road debris.
( 63 )
$135.23
—
$172.09
$121.71
—
$154.88
On Sale
Spartan lockers are affordable, reliable traction. These USA Standard Gear Spartan lockers are mechanical lockers that fit into a standard differential carrier, replacing the open spider gears. They do not use thrust washers and have a revolutionary spring and pin design to make installation a snap! Spartan lockers feature high-nickel 9310 chromoly drivers and couplers for added strength. Give your vehicle great traction and save some cash. Drop in Spartan lockers for improved traction. They're available for a variety of makes and models spanning more than a half-century.
( 31 )
$255.00
—
$272.00
$229.50
—
$244.80
On Sale
Do you have a street rod, muscle car, or sport truck? Whatever your choice, Vision American Muscle 141 Legend 5 series wheels are sure to add the styling that you desire. A classic design, coupled with one-piece cast construction and a beautiful gunmetal finish, makes Vision Wheel 141 Legend 5 an all-around great wheel choice. These wheels are designed to be used with 3/4 hex head lugs or smaller. Add a set to your next project or current ride and you're sure to be pleased.
( 110 )
$160.99
$132.48
On Sale
U.S. Wheel 51 Series paint-ready Smoothie wheels are available in a variety of diameters, widths, bolt patterns, backspacing, offsets, center bores, and load ratings. They feature smooth, seamless 2-piece steel construction in silver or bare finish which you can paint or powdercoat to accent or match your ride.
( 20 )
$124.99
—
$162.99
$112.49
—
$146.69
On Sale
These 57 Series Chrome Rallye wheels are the perfect choice for your classic ride. They feature a 5-hole design and have a chrome finish.
( 26 )
$169.99
—
$216.99
$152.99
—
$195.29
On Sale
Functional and attractive, Morimoto Sealed4 Bi-LED headlight conversions are designed to replace all 4 in. x 6 in. rectangular headlights and offers full low and high beam functionality. Built with powdercoated cast aluminum housings and UV-treated polycarbonate lenses, the heart of these headlights is powered with high-quality Nichia LEDs. In low beam, the LEDs are paired with Morimoto's advanced Kuria Optic projector lens array to efficiently distribute 2,400 lumens on the road in a properly LHD-stepped beam pattern. In high beam mode, the Sealed4 illuminates an extra set of optics, upping the overall output to 4,300 mosquito-melting lumens. Morimoto Sealed4 Bi-LED headlights come standard with H4 3-pin male inputs and should be plug-and-play on most classic cars/trucks.
( 2 )
$286.00
$228.80
On Sale
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$112.95
$101.66
On Sale
Vision American Muscle 141 Legend 5 Series black wheels are the perfect look for your hot rod. These wheels fit everything you've got. Old-school looks in new-school technology are yours for the taking. Go ahead and show off! You know you want to.
( 23 )
$148.99
$132.48
On Sale
U.S. Wheel's 26 Series Chrome Blades are durable steel wheels based on the blade design. They have a twisted, 5-spoke center and a high-luster chrome finish. They're available in many sizes and bolt patterns; a center cap is sold separately.
( 56 )
$174.99
—
$212.99
$157.49
—
$191.69
On Sale
Legendary Wheels offer timeless appeal and superior quality for classic car enthusiasts. They will dress your hot rod or muscle car with unrivaled style and strength to roll true and turn heads. Legendary Wheels HB45 charcoal machined wheels are a cross between the vintage A/C Cobra and the modern "Eleanor". They feature a slimmer 10-spoke design coated with a contrasting gray charcoal finish. Top the Legendary HB45s with the optional (not included) screw-on spinner to create a timeless classic. They are available in either 4- or 5-lug versions.
Not Yet Reviewed
$239.95
$215.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
$103.45
On Sale
Centerforce Performance clutch discs will work with both Centerforce I and II pressure plates. Most of them have a carbon-composite organic friction material for longevity and drivability, as well as positive engagements and excellent heat capacity. These clutch discs are designed to withstand the loadings from high-horsepower engines, but are priced for the everyday driver as well.
( 53 )
$178.95
$161.06
On Sale
U.S. Wheel Deuce 455 Series paint-ready wheels allow you to finish your hot rod with the right touch. These steel Deuce 455 series wheels are ready for you to paint or powdercoat whatever color you would like to customize the look of your rod. Tailor a look that's just right for your ride with U.S. Wheel Deuce 455 Series paint-ready wheels.
( 31 )
$132.99
—
$146.99
$119.69
—
$132.29
On Sale
Functional and attractive, Morimoto Sealed6 Bi-LED headlight conversions are designed to replace all 5.75 in. round headlights, offer full low and high beam functionality, come standard with H4 3-pin male inputs, and should be plug-and-play on most classic cars/trucks. Built with diecast aluminum housings and UV-treated polycarbonate lenses, the heart of these headlights is powered with high-quality Nichia LEDs. In low beam, the LEDs are paired with Morimoto's advanced Kuria Optic projector lens array to efficiently distribute 2,400 lumens on the road in a properly LHD-stepped beam pattern. In high beam mode, the Sealed6 illuminates an extra set of optics, upping the overall output to 4,300 mosquito-melting lumens. Morimoto Sealed6 Bi-LED headlights have a dual light-pipe DRL setup has both a high-intensity white daytime running light and a low-intensity white parking light. The 2-wire DRL/Signal input makes setup easy, and if you don't care for the DRL function, they do not have to be wired in.
Not Yet Reviewed
$314.00
$251.20
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
On Sale
U.S. Wheel 555 Series paint-ready Artillery wheels allow you to create an old-school look befitting any classic ride. These steel Artillery wheels feature a memorable 14-spoke design that comes ready for you to shoot with custom color. Finish your ride with custom style--choose U.S. Wheel 555 Series paint-ready Artillery wheels.
( 9 )
$219.99
$197.99
On Sale
Professional Products PowerForce harmonic dampers are extremely durable—and economically priced. They're built with a bonding process which adheres the elastomer to the I.D. of the inertia ring and the O.D. of the hub, utilizing a strong adhesive along with an improved elastomer to create a much stronger bond. PowerForce dampers also feature white, easy-to-read timing marks against a painted black background. Each unit is accurately balanced and closely machined for the correct fit. Dozens of models are available for applications from 1955 and up. Choose the size, material, finish, keyways, and other options recommended for your vehicle.
( 332 )
$127.99
$115.19
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
Clearance
Customize your classic with a classic--U.S. Wheel 54 Series paint-ready Rallye wheels. These five slotted wheels are well recognized and now you can make them any color you want to match or accent your ride. Rallye 54s offer strong steel construction, are available in several sizes, and are delivered to you ready to paint. Personalize your ride with U.S. Wheel 54 Series paint-ready Rallye wheels.
( 13 )
$118.99
—
$162.99
$107.09
—
$146.69
On Sale
U.S. Wheel 511 Series Smoothie wheels provide a blend of sleek looks with aggressive nature to evoke a new sense of sophistication, power and strength with every spin. Smoothies feature all-steel construction and a glossy black finish. Just grab up some baby moons or other center hubcaps to pair with these timeless rims for a knockout nostalgic look. And, with this U.S. Wheels upgrade, expect tough-as-nails strength and durability, while being lightweight for a smoother, balanced ride. The 511 Series Smoothie wheels are available in a variety of widths, diameters, bolt patterns, and other fitment options.
( 2 )
$162.99
—
$184.99
$146.69
—
$166.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
