Availability
Showing In Stock Items. Show All 25 Items.
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$130.09
—
$223.30
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 10 )
$167.99
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1224 )
$206.99
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$158.47
—
$183.81
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$149.69
—
$155.00
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$100.52
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$201.47
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 164 )
$239.99
—
$243.99
MSD puts their years of experience to work in making these top-notch iron camshaft mounted distributor gears. Their high-grade ductile iron is micro-polished for a smooth and scuff-free finish, and then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these iron camshaft mounted distributor gears for tighter mesh to the distributor gear.
( 19 )
$126.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 799 )
$114.95
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 5 )
$149.95
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 997 )
$114.70
—
$239.99
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 164 )
$234.99
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 58 )
$112.95
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 200 )
$105.99
—
$323.99
American Autowire Breakerless Se ignition systems are made with the highest quality materials to ensure long-lasting durability and performance. They are designed to operate with early model GM vehicles. If it's time to update or upgrade your ignition system, American Autowire Breakerless Se ignition systems are the way to go.
( 21 )
$213.75
Summit Racing™ offers GM high-energy modules with rev limiters that enable you to adjust the rpm limit from 5,000 to 9,500 rpm. They are high performance modules built for HEI distributors, producing 50 percent higher coil drive currents than the stock module. This saturates the coil faster, delivering more spark energy at top speeds. Your benefits are increased horsepower and rpm range, plus improved starting. GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory or aftermarket HEI distributors.
( 4 )
$130.99
These bronze distributor gears from Mallory are recommended for steel billet mechanical roller tappet cams and slot hard-faced steel billet mechanical flat tappet cams. Bronze gears absorb the increased wear in special cams and magnetos and are easily replaced before costly damage to the camshaft gear occurs. The gears are precision-machined from the highest quality aluminum silicon bronze alloy for maximum durability. Bronze distributor gears must be checked often and replaced as needed.
( 1 )
$127.95
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 22 )
$264.99
Old ignitions systems become worn down and really impact the performance of your vehicle. ACDelco ignition conversion kits are not only designed to restore original performance, but also update your vehicle to a newer style ignition. With these newer ACDelco ignitions, you'll experience better throttle response, better fuel mileage, and have an overall better running engine. Each kit includes everything needed to update the ignition—such as modules, plates, and even the grommets. Check your specific application for items included for your vehicle.
Not Yet Reviewed
$229.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 100 )
$148.99
—
$177.99
Davis Unified Ignition street/strip coil kits are capable of 7,000 rpm! The higher voltage output of these coil kits allows you to widen your spark plug gap up to .055 in. The wider plug gaps allow major spark energy into the combustion chamber for a better burn of the fuel mixture and increased horsepower. Due to the high-voltage output of the coils, a burn-through resistant brass terminal rotor is included, as well as nylon rotor screws to prevent misfires at extreme rpm. D.U.I. race coils are installed in your choice of colors, including a cool clear style so you can watch the sparks fly.
( 96 )
$105.99
FAST EZ-Run distributor modules are accurate, dependable, and maintenance-free. These replacement ignition modules have a simple 3-wire connection, saving time and space by eliminating the need for an external ignition box. FAST EZ-Run distributor modules will provide the same performance and fit as the originals they are replacing.
Not Yet Reviewed
$124.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
