Availability
On Sale
Summit Racing™ Flex Fuel sensor bypass/GM sensor and pigtail combo kits allow you to use the GM OEM Flex Fuel sensor in a high-volume, high-flow fuel system with lines up to -10 AN. The bypass allows a portion of the fuel to run through the sensor to measure the ethanol content for your ECM. The rest of the fuel flows around, or parallel to, the sensor, avoiding a restriction in the feed line. Our combo kits include a GM Flex Fuel sensor and pigtail for GM LS Series engines.
Not Yet Reviewed
$217.11
$200.97
On Sale
The Summit Racing™ Flex Fuel Sensor Bypass lets you use a factory-type flex fuel sensor in a high-volume, high-flow fuel system with lines up to -10 AN. The bypass allows a portion of the fuel to run through the sensor to measure the ethanol content for your ECM--and then allows the rest to flow around or parallel to the sensor to avoid a restriction in the feed line. Made from billet aluminum and hard anodized black, the bypass kits come with -6, -8,and -10 AN adapter fittings and also include methanol-resistant O-rings.
( 1 )
$139.99
$109.99
On Sale
Holley offers a selection of both dedicated and universal-style fuel lines for their carburetors. Hard lines are chrome plated and double flared at the outlets. Braided stainless steel lines offer premium features such as rugged billet-style construction and AN aluminum fittings.
( 171 )
$56.65
$50.95
On Sale
Trail-Gear high-pressure power steering hose kits are great for your custom-length setups. The hoses are made from black oil-resistant high-temperature NBR rubber that's reinforced with high-tensile steel wire over a polyester braid. The outer coverings are neoprene-impregnated oil-resistant polyester braid. Features and kit contents include: * No. 6 SAE 100R5/SAE J1402 high-pressure power steering hose * Rated working pressure of 2,250 psi * Minimum bursting pressure of 9,000 psi * Suitable for use in temperatures of -40 degrees F to +275 degrees F * 120 in. of No. 6 high-pressure hose, two straight No. 6 JIC fittings, and two 90 degree No. 6 JIC fittings
( 11 )
$119.99
$101.99
On Sale
Holley EFI fuel system plumbing kits are the perfect complement to your Sniper EFI or Holley EFI kit. These plumbing assemblies are engineered using Holley fuel pumps, regulators, and filters—coupled with Earl's Performance plumbing, to provide a fuel system tailored to your vehicle's specific needs. Components vary, depending on the kit you select.
( 34 )
$249.95
—
$528.95
$224.95
—
$475.95
On Sale
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,049.95
—
$1,399.95
$943.95
—
$1,258.95
On Sale
Holley EFI Stealth 4150 fuel logs provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. For use with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems, these fuel crossovers are easy to install, with their -6 AN male inlet that connects to your existing fuel system. They come pre-assembled by Holley to ensure a leak-free installation.
( 7 )
$75.05
$67.55
On Sale
Holley Sniper EFI Stealth fuel crossover kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. Available in two variations, both contain a braided fuel hose with crimp-on ends for a leak-free installation and two fuel bowl standoffs. One variation includes a T-fitting and the other a black anodized billet fuel regulator, preset to 58.5 psi, and a mounting bracket.
( 1 )
$127.95
—
$319.95
$115.15
—
$287.95
On Sale
These Quick Fuel carburetor fuel lines are designed to keep the guesswork out of carburetor hookups. They come available for multiple brands of carburetors and in different forms for a variety of applications.
( 99 )
$96.75
—
$179.95
$87.05
—
$143.95
On Sale
Summit Racing™ Premium reinforced rubber hoses offer the perfect choice for all your performance fuel, oil, and water fluid transfer needs. Today, the paraffins and additives found in commercial- and performance-bought fuels and oils have become too much for old school conventional rubber hose, causing premature deterioration. Our Summit™ Premium reinforced rubber hoses consist of a multi-layer wall, preventing fuel infiltration from within the hose or evaporating into the atmosphere, as well as offering high resistance to heat and providing superior fluid flow to effectively eliminate premature failure. Available in several diameters and lengths, these synthetic twined reinforced hoses will stand up to the most corrosive additives found in the market today. They are SAE J30R9 rated and safe to use with alcohol, methanol, E85, E97, water, coolant, and oil. Select the size(s) needed for your project.
( 4 )
$116.99
—
$120.99
$95.99
—
$99.99
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
—
$849.95
$673.95
—
$763.95
On Sale
Fix your leaking transmission lines with Fleece Performance transmission cooler lines. They are heavy-duty, high flow, flexible transmission lines. Direct replacements for OEM lines, the kits come complete with everything needed to get the job done right the first time. Kits include transmission lines, fittings, and zip ties. If you have an OEM replacement or aftermarket radiator, Setrab fittings may be required (sold separately).
( 9 )
$75.99
—
$329.99
$64.59
—
$280.49
On Sale
Holley offers air conditioner compressor manifolds in a variety of styles and finishes. These replacement line adapters are machined from aluminum or copper and will facilitate your A/C compressor hookup. Mounting hardware is included. Applications include vehicles with a GM LS engine.
( 8 )
$24.14
—
$42.44
$21.73
—
$23.34
On Sale
FiTech stainless steel fuel line kits are perfect for plumbing your vehicle for pump gas, methanol, ethanol, or alcohol. These braided, chemical-resistant flex lines are available in a natural or black finish, and they include aluminum fittings, 40 micron filter, and check valve. Order the fuel line diameter and length needed for your application.
( 2 )
$373.00
—
$512.00
$335.70
—
$460.80
On Sale
Radiator hoses manage the flow of coolant, removing excess heat from the coolant before returning it back to your engine. Failed hoses can lead to coolant loss, overheating, and engine damage. To service, restore, and maintain your Ford classics, Scott Drake radiator hose sets are obtainable in several options covering several vehicle applications. Most are 3-piece sets that include bypass hose, and all include upper and lower coolant hose. Many of the sets feature a lower nylon-reinforced radiator hose with a stainless steel support spring to prevent the hose from collapsing. Scott Drake radiator hose sets are constructed from silicone or other premium materials providing a direct fit and lasting durability.
( 45 )
$32.07
$28.86
On Sale
The chrome plating of these Mr. Gasket gas lines dresses up your engine bay, along with providing an excellent trail for your fuel to travel along. They're made of steel tubing, brass fittings, and silver-brazed connections. The hex fittings provide ample space for tightening to ensure a quick installation.
( 64 )
$25.95
—
$99.95
$14.27
—
$89.95
On Sale
Scott Drake oil pressure sending extensions are offered in a choice of sizes and finishes. These hex shaped extensions are made from machined metal and are crafted for durability and quality.
( 53 )
$35.65
—
$40.41
$32.09
—
$36.37
On Sale
Holley Terminator EFI fuel system plumbing kits provide everything needed for a complete supply fuel system for the Terminator EFI self-tuning engine management system. They are engineered using Holley electric fuel pumps, fuel pressure regulators, and fuel filters, coupled with quality Earl's hose, to provide a fuel system tailored to the needs of your Terminator EFI system. The systems are available with different fuel pumps and types of fuel hose, so you can choose what best fits your application. All Holley Terminator EFI fuel system plumbing kits feature quality Earl's anodized aluminum fittings to get the job done and look good, too.
( 10 )
$725.95
—
$1,399.95
$652.95
—
$1,258.95
On Sale
Holley power steering hard lines offer a clearance solution. The pressure hose connection on the Type II power steering pump is really close to the pulley making it difficult to attach the hose. Holley power steering hard lines move the connection behind and below the pump for clearance and improved appearance. The special banjo bolt and crush washers provide additional clearance. Holley also includes a mounting bracket that makes the hardline stronger and less likely to crack from vibration or abuse. The kits are made from strong steel and zinc plated.
( 3 )
$91.65
—
$127.95
$70.95
—
$82.45
On Sale
Power steering hoses need to fit properly—and Scott Drake offers a selection of quality replacements at affordable prices. They have designed authentic reproductions for your classic Mustang to provide not only the fit but the look, as well as carrying aftermarket styles. These lines feature the right bends and ends to make your install easier. Restore or repair your power steering with OE-style hoses and lines from Scott Drake.
( 37 )
$52.35
—
$60.65
$47.15
—
$54.55
On Sale
Holley has fittings to adapt different sized fuel lines to bare Holley fuel bowls, as well as hose and banjo fittings for special applications.
( 106 )
$18.99
—
$49.95
$17.09
—
$44.95
On Sale
Holley MAP sensor port plugs are milled from billet aluminum for strength, powdercoated for corrosion resistance, and include an O-ring for a tight seal. They're designed to eliminate LS3-style MAP sensors and work with most intake manifolds.
( 5 )
$36.14
$32.53
On Sale
Eliminate the troublesome and leaky quick-connect heater core line on your truck with the latest OEM+ solution from Fleece Performance. Their heater core replacements hose and fitting kits are direct replacements for the problematic stock hose and quick-connect style fitting. The silicone hose and stainless steel fitting will provide a reliable solution to fix the leaks once and for all. Fleece kits include Permatex thread sealant and two new hose clamps.
Not Yet Reviewed
$69.99
$59.49
On Sale
Fragola Performance Systems Series 8600-8700 Parker Push-Lok hose is the performance standard for a multitude of applications. It is manufactured to the same rigorous standards as all of Parker's products. A synthetic rubber tube is covered with one layer of textile braid, combined with an outer layer of synthetic rubber in a choice of colors. Series 8600-8700 hose performs well when used within the temperature and pressure parameters that it was designed for: 250 psi maximum pressure for most oil, water, and fuel applications; with a –40 degrees F to +212 degrees F temperature range. Sized in fractions, it may be used with any push-on style fitting. Series 8000 Push-Lite race hose ends work especially well with Fragola Performance Systems Series 8600-8700 Parker Push-Lok hose.
( 48 )
$3.99
—
$83.99
$3.59
—
$75.59
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
