Availability
On Sale
Spicer Drivetrain Products offers ball joints for a broad range of applications, from the 1970s and up. These OE-style replacements are made from quality materials, and most include mounting nut and cotter pin for installation. Swap out your worn or damaged original ball joints with a new kit from Spicer.
( 100 )
$89.99
Replace weak-type tie rod sleeves that are prone to failure under performance and racing use with new billet aluminum tie rod sleeves from Proforged. These billet aluminum tie rod sleeves can put the ultimate finishing touch on your front-end rebuild. Featuring machined-out solid 6061-T6 aluminum that's MIL-Spec black anodized, these heavy-duty tie rod sleeves are lightweight and look great. Best of all, Proforged thread-matches their tie rod sleeves to their mating tie rod ends to offer the perfect fit.
( 53 )
$79.95
KYB Gas-a-Just shocks use higher gas pressure to keep your tires glued to the road. The velocity-sensitive valving system adjusts quickly to changing road conditions for maximum comfort in any situation. Their monotube configuration eliminates aeration and foaming, while micro-smooth, hard-chromed pistons extend their life. Seamless cylinders and eye-rings completely eliminate seam failures. These replacement shock absorbers are available for vehicles as far back as the 1940s. Order the model recommended for your application.
( 1067 )
$51.44
—
$55.98
Gabriel Load Carrier shocks are the perfect combination of shock and spring technology to help reduce the loss of ride height in ongoing loaded conditions. These front and rear spring-assist shocks feature a chromed piston rod to inhibit corrosion—as well as ensure proper seal lubrication and provide a more consistent wear surface. Load Carriers also have a leakproof design to help prolong their life. Models are available for hundreds of vehicle-specific applications.
( 230 )
$107.99
Want a more positive tie rod adjustment? Install these QA1 heavy-duty tie rod sleeves. They're manufactured from solid steel hex stock, and zinc plated for corrosion resistance. The sleeves included plated hex nuts for easy adjusting and hold them in place when tightened.
( 55 )
$91.95
Monroe Max Air shock absorbers are ideal for vehicles that haul heavy loads or tow trailers. They're designed to maintain vehicle height and can be inflated or deflated as needed, from 20 psi to 150 psi with the vehicle loaded. If you're hauling heavy, try Monroe Max Air shock absorbers to get the job done. These adjustable shocks are available for fitment on hundreds of specific vehicle applications. Features: * All-weather fluid that contains special modifiers to ensure smooth rod reaction * Full displaced valving on both the compression and rebound for a comfortable ride * Sintered iron piston that enhances durability for long service life * Lubricated air sleeve that reduces friction and provides smoother operation during suspension movement * Hardened and precision-ground 1/2 in. piston rod for consistent performance * Large-volume air chamber that will hold a maximum of 150 psi
( 287 )
$99.99
—
$113.99
On Sale
Lakewood combined their experience and the latest technology in drag racing to develop shocks and struts that are superior to all other drag shocks and struts available. They provide the correct weight transfer on the initial launch and then bring the front-end down quickly for aerodynamic purposes. This transfer will result in lower ETs and keep the rear-end loaded for maximum traction.
( 115 )
$105.95
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 242 )
$81.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative for replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your one source for remanufactured hard parts. Remanufactured parts may look different from factory parts but perform the same because Cardone products are the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their remanufacturing processes can only be found behind the Cardone name. Additional features include: * The most advanced engineering and remanufacturing processes to provide you with high-technology replacement parts * 100 percent disassembly and component renewal to ensure that you receive reliable products * All new O-rings and lip seals ensure no leaking and long-lasting performance * 100 percent computerized testing for quality and reliability * All critical components are triple-tested to ensure product reliability * 100 percent appearance-inspected to ensure your satisfaction * Rust-inhibitive "Cool Dip" finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake, or peel * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life
( 340 )
$98.99
Summit Racing™ offers drag race shocks and struts for countless vehicles from the 1950s and up. They're available in a variety of styles for front and rear applications—including 90/10, 70/30, and 50/50. A 70/30 strut extends faster than it contracts, meaning faster front-end lift but longer to settle back down. 90/10's will lift your front-end very fast and settle it back down slowly, keeping the weight transferred to the rear tires much longer than the 50/50 models. Order the drag shocks and struts recommended for your racer.
( 11 )
$62.99
On Sale
UMI Performance tie rod adjusting sleeves have heavy-duty tie rod adjusters to eliminate the factory clamp-style design, making adjustments easy and hassle-free, while enhancing steering. UMI Performance tie rod adjusting sleeves are CNC-machined from 6061 aluminum hex, feature left and right hand threads for easy on-car adjustments, and are finished in a durable black anodized coating. These tie rod adjusters work with the factory tie rod ends with no modifications.
( 25 )
$59.99
$53.99
When it comes time to update your vehicle's tie rods, make the fix easy and quick with Classic Performance Billet tie rod adjusting sleeves. These hexagonal aluminum pieces are lighter and easier to adjust than their stamped steel cousins. They leave no crevices for water to get into, and their locking jam nuts are easily tightened. Classic Performance Billet tie rod adjusting sleeves make it easy to get lengths right.
( 9 )
$68.99
Repair your steering gear for a fraction of the cost of a rebuilt steering box. Edelmann steering gear rebuild kits contain the seals, O-rings, gaskets, input or sector shaft bearing, and hardware parts specific to your repair. With a commitment to OE form, fit, function, and unparalleled technical support, Edelmann is your obvious choice for power steering replacement parts. Edelmann offers complete coverage, from seal kits to complete rebuild kits.
( 18 )
$94.99
—
$97.99
Improve the steering feel and eliminate the flex of the factory tie rod sleeves with this pair of Hotchkis Sport Suspension tie rod sleeves.
( 36 )
$99.99
Vital additions to any vehicle, these rear control arm bushing kits control unwanted hop or shudder. Prothane offers complete kits for all popular rear 2 and 4-arm applications and come in a selection of both shelled and unshelled versions.
( 30 )
$95.48
Cardone remanufactured power steering pumps are among the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their technicians pinpoint original equipment design weaknesses by examining failed cores. You'll benefit from the Cardone expertise when you order the remanufactured power steering pump designed to fit your application. Features include: * All critical components are triple-tested to ensure reliability * All units are built with 100 percent new O-rings and premium-grade Viton® seals to prevent leaks and avoid high-temperature breakdown * Every pump is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort, and noise * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life * Units are supplied with 100 percent tested and calibrated pressure relief valves * Cardone remanufactured parts are business and environmentally friendly
( 142 )
$58.99
—
$84.99
Whether you're replacing tie rods or updating rusty equipment, Classic Performance OE tie rod adjusting sleeves will make getting the correct lengths easier. These OE stamped units have end clamps for ease of tightening and are designed for excellent fitment.
Not Yet Reviewed
$68.99
Monroe OESpectrum shocks and struts provide unprecedented handling precision and control, while removing the ride harshness that's common with many foreign applications. Their unique blend of comfort and control is due to Tenneco's "Twin Technology Active Control System." This exclusive internal damping control technology consists of an impact control valve (ICV) that delivers exceptional control in all driving conditions, together with a patented, low-speed tenability piston design to isolate impact-related noise, vibration, and harshness. Additional features include: * All-weather fluid with special modifiers to reduce friction and ensure smooth rod reaction * Rod displaced valving, specifically tuned for each application, adjusts to road extremes to provide consistency and ride comfort * Fluon banded piston provides consistent sealing between the piston and pressure tube, which delivers better control and increased durability * Hardened chrome plated piston rod for long service life * Nitrogen gas charged for improved ride and handling; helps maintain tire-to-road contact by reducing aeration * Unique rod guide and single lip seal provide longer service life and consistent performance
( 192 )
$53.99
To get the most benefit from your vehicle suspension, it's essential to install all available assets--including Gabriel steering stabilizers. These inexpensive kits dampen the shimmy or wobble effect which occurs from adding lift or larger tires to your ride. Vibrating problems can often be tamed with quality stabilizers, and they reduce driver fatigue by facilitating easier turns on the highway, track, or paths less traveled. Gabriel offers a variety of models to fit scores of cars, trucks, vans, and Jeeps. Just match up your vehicle specs to the correct steering stabilizers … and make the shake a distant memory.
( 12 )
$69.99
Dorman tie rod ends are direct replacements and ensure a proper fit every time. They are constructed from high-quality materials and will help to eliminate the rattling and clunking noises associated with a failed tie rod, while providing secure tie rod connections and a trouble-free installation. Dorman tie rod ends are available for a variety of vehicle applications.
Not Yet Reviewed
$51.99
—
$52.99
Lares takes care to clean their remanufactured power steering pumps thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent seals and O-rings; and the pumps are then tested to ensure proper performance. Over a thousand models are available; order the power steering pump recommended for your vehicle.
( 20 )
$65.99
—
$89.99
Allstar Performance Pacer spindles primary purpose is to improve suspension performance in race car applications. Being forged from 4130 alloy steel, the Pacer spindles are designed for durability and considered stronger than standard stock units. The spindles modular design allows for the steering arm to be flipped, making the spindle interchangeable between the left and right sides of the vehicle. They offer a combination of design flexibility, compatibility with common components, and strength, which are advantageous features in race car construction and performance tuning.
Not Yet Reviewed
$87.99
Clearance
Mevotech Supreme Coil Springs are constructed of high-grade alloy steel that has been heat-treated and annealed for increased durability and strength. They are then coated in paint for increased corrosion resistance, preventing service life-robbing rust from building up.
( 18 )
$83.99
—
$87.99
Prothane offers a wide variety of motor mount styles. In all cases, their mounts are designed to limit the travel, reduce the chances of breakage, and put the power to the wheels. All of the motor mount kits feature application-specific engineering. In other words, they're not universal in fit, and they provide you with the performance you demand. If applicable, the mounts feature a polylocked "run-safe" feature, just in case you play way too hard, so you can still get back home.
( 205 )
$105.85
—
$113.72
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
