Availability
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$112.40
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 54 )
$234.99
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$166.50
ARP High Performance Series connecting rod bolts are made from seamless and defect-free 8740 chromoly steel. All ARP rod bolts are heat-treated before grinding and thread rolling and have a large underhead radius for greater strength. Guaranteed to pass magnetic inspection testing, these bolts are nearly five times stronger than OEM bolts. They're used in applications ranging from stock replacement to Circle Track, marine, and drag racing engines.
( 255 )
$119.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$204.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 134 )
$144.99
—
$218.99
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$108.99
—
$121.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$100.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$185.99
—
$213.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$112.99
Mopar Replacement accessory belt tensioners are genuine OE-replacements offering the right fit, function, and peace of mind. Most everyone understands that belts wear out and need replaced. When installing new belts you should replace the tensioners, as well, because they wear out, too. Avoid future problems by choosing from the plentiful selection of quality Mopar Replacement accessory belt tensioners, and keep your Chrysler, Dodge, or Jeep running smoothly.
( 5 )
$144.99
Continental ContiTech hex double V-belts are designed for use on drives with one or more reverse bends. They usually transmit power from both sides of the belt. To meet the multiple-bend and dual power requirements, ContiTech hex belts are built with rugged Vyacord tension members—delivering maximum strength with minimum elongation. They work together with all the other quality hex belt materials to ensure maximum performance over a long, trouble-free life. Check your pulleys and make sure they're good to go; if not, choose from Continental's C-Section pulleys for great drive results.
Not Yet Reviewed
$216.99
Dorman variable valve timing solenoids will restore the fuel efficiency and normal operation of your vehicle. These direct replacement solenoids are engineered from quality materials for a proper fit and years of effective performance. They easily plug into the electrical harness and come conveniently packaged with the installation gasket (where applicable). Maintain proper oil flow and pressure with Dorman variable valve timing solenoids.
( 27 )
$197.99
Standard Motor variable cam timing solenoids are direct-fit OE replacements for your vehicle's original components. These solenoids effectively restores engine horsepower and torque curves while reducing emissions and improving vehicle efficiency. Standard variable cam timing solenoids have been manufactured to exceed OEM specifications for dependable, accurate, maintenance-free operation.
( 4 )
$180.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
