Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
ACURA Ignitions & Electrical
Showing In Stock Items. Show All 112 Items.
ACDelco Gold Automotive AGM Batteries
ACDelco Gold Automotive AGM batteries have high-cycling capabilities, are remarkably charge-receptive, and are necessary for start/stop applications. These batteries are also maintenance-free, 100 percent pressure-tested against leaks, and are manufactured to resist corrosion. Best of all, they are backed by ACDelco's outstanding warranty coverage. When reliable starting power is a priority— ACDelco Gold Automotive AGM batteries are the answer! Additional features include: * Absorbed Glass Mat design is 100 percent leak and spill-proof, because the electrolyte is permanently held in the glass mat separator, instead of free flowing within each cell * Oxygen recombination reduces water loss and reassures maintenance-free performance * ACDelco Gold Automotive AGM batteries have longer life expectancy in traditional vehicle applications, due to a maintained pressure on the plates, which significantly reduces the amount of active mass lost from the grid
( 368 )
$170.99
—
$194.99
NTK Oxygen Sensors
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 85 )
$113.99
Summit Bucks
Denso Remanufactured Alternators
Denso alternators are not only original equipment on many of the world's top production cars; they are a favorite in motorsports as well, where their light weight, high-efficiency, and durability make them the natural choice. Denso remanufactured alternators go through a grueling process; stators and rectifiers are tested to 300 V, while rotors are submitted to 600 V, to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-specification lubricants. Offered in wide range of amp ratings for hundreds of specific vehicle applications, all alternators meet Denso's rigorous First Time Fit standards. Contemporary vehicles employ dozens of sophisticated electronic systems, placing heavy demands on the charging system. The alternator is no place to cut corners. Additional features of Denso remanufactured alternators include: * Meet or exceed all manufacturer standards, and provide years of reliable service * First Time Fit provides perfect mounting with no belt/pulley alignment issues * Housings re-tapped and damage-checked for heat warping, corrosion, or improper surface alignment * Voltage regulators 100 percent tested to OE standards * All hardware stripped and replated * Premium cores and precise OE-assembly benchmarks * Designed to meet grueling heat and electrical requirements * OE-quality fit and appearance * Full compatibility with sensitive electronics systems
( 43 )
$148.99
—
$202.99
Interstate Mega-Tron Plus Automotive Batteries
Interstate Mega-Tron Plus automotive batteries are designed to meet or exceed OEM vehicle requirements for cold-cranking amps. They have removable caps to add water, extending the life of the batteries. Available in a variety of group sizes, Interstate Mega-Tron Plus automotive batteries will help you fire up your engine, time and time again, with no trouble.
( 40 )
$190.99
—
$229.99
Summit Bucks
Denso Remanufactured Starters
Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions
( 21 )
$129.50
—
$215.99
Bosch Remanufactured Alternators and Generators
Bosch remanufactured alternators and generators have new parts and are performance-tested to ensure longer, more reliable, vibration-free, and quiet operation with maximum performance. Features: * Full-load tested to guarantee compliance with Bosch's strict performance specifications * 100 percent factory-tested, units are remanufactured (not rebuilt) * Rotor slip rings machined to the toughest concentricity specifications in the industry for increased brush life and reduced electrical interference on computer-controlled vehicles * 100 percent new high-quality bearings * Voltage regulators and rectifiers tested (and replaced where required) ensuring stable voltage output and eliminating shorts and open circuits for maximum reliability, cranking, and starting * Built to last using high-quality materials and the most technologically advanced developments
( 21 )
$115.99
—
$235.99
Summit Bucks
Denso Air/Fuel Ratio Sensors
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 23 )
$105.99
—
$226.99
Dorman Accelerator Pedal Position Sensors
Are you having problems with your electronic throttle? If so, then pick up one of these Dorman accelerator pedal position sensors. They are designed to indicate the position of the accelerator pedal by converting the accelerator pedal movement into two electrical signals so that the computer can provide the proper change in throttle position. Available for a variety of vehicles, the Dorman accelerator pedal position sensors are sure to solve any of your electronic throttle issues.
( 16 )
$112.99
On Sale
Summit Bucks
Mishimoto Ignition Coils
The basic requirements for a properly running engine are fuel, air, compression, and spark. A weak spark from your ignition system can result in misfiring under high-load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto ignition coils are high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. They are designed and tested to meet or exceed OEM performance standards and are available as a single coil or in sets. Once installed with a set of new spark plugs, you can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance. The primary frame of Mishimoto coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high-temperature environments, while a precision lower rubber boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. Each coil is pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Swap out your worn or defective factory coils with Mishimoto's ignition coils, and as with all their products, the coils include their signature Mishimoto Lifetime Warranty. Choose the ones designed for your vehicle in the quantity needed.
Not Yet Reviewed
$204.95
$131.05
—
$204.95
Hybrid Racing K-Series Swap Conversion Wiring Harnesses
Hybrid Racing offers K-Series Swap conversion wiring harnesses for a variety of applications, including many Honda© and Acura© models from 1988 and up. With over 10 years of K-Series swap wiring experience, these harnesses are the most widely used and reliable K-Swap conversion products on the market. The K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness, and your K-Series ECU, allowing for a simple plug-and-play K-Swap. The conversion harnesses allow for full functionality of the factory gauge cluster. Order the model recommended for your vehicle.
( 1 )
$208.99
Beck/Arnley Crankshaft Position Sensors
Has your vehicle ever mysteriously died on you, only to start up fine after emergency road service showed up--and then it happens again? Could be caused by malfunctioning crankshaft position sensors. Beck/Arnley sensors help to control many functions on your car, from ignition timing to power output to fuel efficiency, by relating crucial data to your vehicle's ECU. If your crankshaft position sensors become burnt or worn out, solve the "mystery" with new sensors from Beck/Arnley, for a life made easier by parts made right.
( 3 )
$123.99
—
$129.99
Standard Motor Vehicle Speed Sensors
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 17 )
$129.99
—
$202.99
ACCEL Acura/Honda® Super Tuneup Kits
Maximize the performance of your Acura or Honda® with Acura/Honda® super tuneup kits from ACCEL. These tuneup kits consist of everything needed to put a super tuneup on your vehicle's engine. All kit components are perfectly matched to give you the best performance that your ride is capable of. Each of these precision-molded, impact-resistant kits contains a wire set with heat-reflective spark plug boots, a distributor cap and rotor with high dielectric strength, and brass contacts. These kits facilitate an easy install to get your ride revved up and raring to go.
( 12 )
$204.95
Standard Motor ABS Speed Sensors
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$100.99
—
$240.99
Cardone New Distributors
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 153 )
$217.99
Summit Bucks
Denso Mass Airflow Sensors
The mass air flow (MAF) sensor detects the amount of air drawn into the engine and relays a signal to the engine control unit (ECU) to calculate the proper fuel delivery to the engine. DENSO created the world's first plug-in mass air flow sensor in 1996 and Denso mass air flow sensors meet the stringent requirements of auto manufacturers around the globe. Denso's improved MAF sensor technology utilizes a unique structure that reduces the exposure of the sensing unit. This helps to reduce sensor contamination for improved detection accuracy. Denso also uses a fine platinum wire sensing element coated with a glass film to further protect it from contaminants for extended sensor life. Key features and benefits of Denso mass air flow sensors include: * Denso's First Time Fit design allows for easy plug-in installation * Glass film coated sensing element reduces contamination and improves reliability * Platinum wire sensing element responds quickly to changes in air flow * Reduced size and weight * Sensing element air bypass structure is designed for improved detection accuracy * Helps deliver optimum combustion, performance, and emissions
( 6 )
$109.99
JET Powr-Flo Mass Airflow Sensors
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$209.99
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1995 )
$182.95
—
$204.95
Hybrid Racing Battery Relocation Brackets
Make room for larger intakes or clean up your engine bay by installing a Hybrid Racing battery relocation tray in front of the gearbox. These brackets also work with and are part of the Hybrid Racing 3.5 in. cold air intake kit. Additional notes: * Fits OEM or smaller batteries * Gain engine bay real estate * Laser-cut steel, black powdercoat finish * Fits: -- 2007-10 Acura CSX Type S -- 2006-11 Civic Si (FA5/FG2) -- 2007-10 Civic Type R FD2 (requires modification) -- 2007-10 Civic Type R FN2 (requires modification)
Not Yet Reviewed
$113.99
Delphi Mass Airflow Sensors
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 103 )
$107.99
—
$133.99
Cardone Remanufactured Distributors
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 31 )
$213.50
Standard Motor Ballast Resistors
Are you looking for extra protection? Standard Motor has you covered with their ballast resistors. They are perfect for protecting your points-style ignition system. They also allow you to install aftermarket coils without worrying about frying your ignition.
( 16 )
$178.99
Standard Motor Relays
Don't take chances with old or questionable relays that can leave you stranded. Standard Motor Products relays are designed to exceed OEM specifications for accurate, maintenance-free operation. These replacement units are available in dozens of configurations for easy installation on countless applications. Trust your vehicle's needs to Standard Motor Performance.
( 64 )
$141.99
—
$155.99
Granatelli Motor Sports Spark Plug Wires
Granatelli spark plug wires utilize an exclusive solid stainless connector cable with stainless snap-lock spark plug connectors and a patented EMI/RFI protection ring. This helps them exhibit near 0 ohm resistance, with RFI/EMI outputs less than OE. These kits increase power to the spark plug by up to 25 percent over stock, and their high-temperature silicone boots resist temperatures of up to 500 degrees F. They're ideal for use with aftermarket headers and turbocharger systems, and installation is as easy as changing the factory units. The assembled wires are engineered to exceed OEM specifications and to be OBD-II computer safe. Order the set designed for your vehicle application.
( 56 )
$107.94
—
$214.46
