Availability
Showing In Stock Items. Show All 212 Items.
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$503.00
—
$1,242.00
Hybrid Racing K-Swap clutch release system upgrades help to eliminate grinds during hard shifts and improve the feel of gear changes. Factory clutch master cylinders in newer cars are known to be rather unreliable, and because of their poor design and quality, they can lead to premature failures of critical parts throughout the drivetrain. High rpm grinds are mostly attributed to the OE master cylinder's inability to transfer fluid effectively to the slave cylinder, thus causing grinding and rasping of the gears and synchro since the clutch disc hasn't fully disengaged. Upgrading the clutch master cylinder and clutch line to Hybrid Racing K-Swap clutch release systems changes the system to an older, more direct, and efficient system. This improvement allows the driver to feel a more consistent and direct clutch pedal which also improves shifting at high rpms. These kits are intended to replace all of the clutch release components which will give you the most direct and reliable clutch pedal feel. Features and kit contents: * Genuine Honda® parts--not reproductions * OEM Nissin EM1 clutch master cylinder * Stainless steel braided clutch line * Banjo fittings with washers * OEM NISSIN slave cylinder (non-dampened)
Not Yet Reviewed
$266.94
Hybrid Racing offers A2 K-Series Swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, they created the very first Bolt-In K-Series swap shifter. The Hybrid Racing Bolt-In K-Swap shifters allow you to retain the stock center console in your EF, EG, EK, and DC chassis and only require drilling two small holes. They work with both stock DC5 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose Hybrid shifters not only for their reliability but for ease of installation and adjustability. The front/back throw can be adjusted to three different settings (100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The left/right throw can also be adjusted to three different settings (again, 100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The shift knob can be adjusted to up to 3 in. vertically, and the aluminum offset block can be rotated 360 degrees. They accept M10 x 1.5 shift knobs.
Not Yet Reviewed
$408.49
ACT Streetlite Xact flywheels are designed to provide significantly improved engine response and acceleration at an affordable price. Order the model designed for your vehicle application. Features: * Lighter and stronger than OE flywheels * Better drivability and durability * Recommended for street use and drag racing * Designed using the latest CAD and Finite Element Analysis software * CNC-machined and dynamically computer-balanced for smooth operation at extremely high rpm * Entire forgings are heat-treated for strength and toughness * Tight tolerances for fit, concentricity, and parallelism * Adequate material behind the friction surface for excellent heat capacity * One-piece construction for reduced failure and uniform, efficient heat transfer—no more warped inserts * Integral ring gears are induction-hardened for longer gear life and weight reduction where it matters most—eliminates gear breakage or separation * Ring gears are cut with lead-in chamfers for better starter engagement and to prevent rounding-off gear teeth * SFI-certified
( 35 )
$255.00
—
$390.00
Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 47 )
$17.99
—
$36.99
Action Clutch multi-disc clutch kits are high performance race clutch systems built using premium materials. They are for NA, Forced Induction, and Nitro race vehicles making serious power, and even though they are high performance race kits, the pedal feel is not as stiff as you'd imagine with an aggressive, but manageable engagement. Action Clutch twin disc race kits are specifically designed for race and track purposes and have an 800 torque holding capacity. They feature two sintered metallic race discs that provide a higher heat capacity through their unique formulated friction mix and a ventilated 6061 T-6 billet aluminum clutch cover design. Their engagement characteristics are smooth, offering an increase in clamping force without requiring twice the pedal pressure, and overall weight reduction provides a quick throttle response to get you off that line as fast as possible. Select the kit designed for your vehicle. Features: * Ventilated 6061 T-6 billet aluminum clutch cover design * High-strength steel alloy pressure and floater plates * .250 in. thick discs provide excellent wear resistance and offers superior performance in elevated temperatures * Rigid hub type (rigid design may increase spline wear) * Design offers less rotational mass, superior temperature resistance, and minimized deflection when quick shifting * Individually inspected for proper release
Not Yet Reviewed
$1,377.45
—
$1,424.95
Pro Series flywheel bolts from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register.
( 369 )
$38.99
—
$58.99
Summit Bucks
Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.
( 11 )
$119.91
—
$489.63
Hybrid Racing offers short shifter assemblies for a variety of applications, including many Honda© and Acura© models from 1988 and up. These economical units feature an unparalleled level of adjustability so drivers can tweak every aspect of the shifter to suit their own preference. The shifters' frame is constructed from TIG-welded, powdercoated, 1000 Series steel. The anodized upper and lower rocker assemblies are now made of single pieces of aerospace-grade aluminum, with custom sealed ball bearings to reduce friction. The new V2 shifter, for instance, is 60 percent smoother than the original version, requiring much less physical effort to row through gears all while being significantly lighter. Shift throw adjustment is achieved using two threaded cable attachment pins, meaning fine tweaks can be made to shift throw, allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin© pivot cap for sturdy, quiet operation. New dual, zinc-plated extension springs replace the OEM-style torsion centering spring for better-centering action and a more direct feel. The front/back throw and left/right throw can be adjusted independently; and most models include shift knob height adjustment. Simple single-bolt height adjustment design (borrowed from the popular K-swap shifters) allows the knob to be adjusted higher or lower than stock (within a 1.5 in. total range) with only a 5mm Allen wrench. Now you can tweak the shifter's throw AND knob position independently until the shifter functions exactly the way you want it to. Enjoy smooth, precise, and direct shifts with a new short shifter assembly from Hybrid Racing!
Not Yet Reviewed
$306.84
—
$408.49
Hybrid Racing offers shifter cables for a variety of applications, including many Honda© and Acura© models. They're a performance upgrade replacement for OEM cables. The solid rod ends and spherical bearings give these cables a firmer, tighter feel over stock cables, resulting in fewer missed shifts and a more connected feel to the chassis. Hybrid cables deliver peace of mind and improved driving performance—even when shifting hard or during demanding racing scenarios. Other notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (OEM are plastic and known to break on the factory cables). All of the rod ends and mounting bushings are CNC-machined 6061 aluminum that have been heat-treated and hard-anodized black before being laser-etched with the Hybrid Racing logo and flair. Aside from two shifter cables, each set includes cotter pins, and other components relevant to your application. Select the kit designed for your vehicle.
Not Yet Reviewed
$378.09
Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 3 clutch kits for heavy-duty street and occasional drag/road/drift racing offer a 170 percent increased holding capacity. They utilize extremely durable, high performance MIBA sprung ceramic discs and feature a single diaphragm heavy-duty pressure plate with reinforced drive straps for increased durability. They are available in a 4- and 6-puck configuration with the 4-puck being the more aggressive of the two. Stage 3 kits are engineered for low/mild horsepower vehicles, and create quick engagement as well as clutch chatter, which should be minimal once proper break-in is completed. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement
Not Yet Reviewed
$403.71
—
$407.96
Hybrid Racing offers clutch master cylinders for a variety of applications, including select Honda© and Acura© cars from 1992 and up. These OEM-quality replacements are popular upgrades because of their fit and performance. Built from aluminum, some models feature a remote reservoir, while others include an attached reservoir. Select the design recommended for your vehicle.
Not Yet Reviewed
$184.29
These National Bearing automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for a leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 3 )
$6.99
Competition Clutch offers Stage 2 clutch kits for a variety of applications, including many Mazda, Subaru, Toyota, Scion, Geo, Lexus, Pontiac, Mitsubishi, Hyundai, Nissan, Infiniti, Ford, Honda©, and Acura© models from 1975 and up. The kits provide up to 80 percent increase in torque capacity and are properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. State 2 clutch kits include a Competition Clutch performance pressure plate, a high-torque sprung disc with anti-burst steel-backed Brass Plus facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.
Not Yet Reviewed
$350.00
—
$795.00
Hybrid Racing offers V3 short shifter assemblies for a variety of applications, including many Honda© and Acura© models from 2001 and up. The performance of a shifter can mean the difference between winning a race and missing a shift—and a high-quality shifter can make your car shift like a new, high performance machine. The new V3 RSX short shifter not only sits on a stronger and lighter steel frame, but the internal spring also keeps the motion totally fluid through all gears. The 4-link design offers adjustable short and crisp shifts while keeping parts to the minimum. When it comes to adjustability, the RSX shifter truly shines. Adjustments are a breeze and can give you many different options in terms of shift feel. With just the turn of a single 5mm Allen wrench, you can adjust your shift knob to be 2 in. taller or 1 in. lower than stock. With the same Allen wrench, you can adjust the knob position, bringing it closer to or further from the steering wheel—meaning you can shift quickly and keep your hands on the wheel. Want your shifts a little shorter? These shifters can reduce throw anywhere from 10 to 50 percent (below stock throw). Gate spacing (left-right shifter motion) is also adjustable. This means that if you like short throws and wide gates, long throws, and narrow gates, or any other combination, you can custom tailor it to your preference. One glance at Hybrid Racing's RSX shifter reveals a design that cuts no corners. The base plate is made from formed and welded A6 steel that's lighter and stronger than the outgoing model. The links feature full 6061-T6 aluminum construction with stainless steel ball bearings that are designed to provide quiet operation with no need for lubrication. The shift levers are made from stainless steel to avoid unsightly corrosion. The internal spring can also be swapped out for something stiffer/lighter so you can set the level of resistance you prefer. With their superior construction, adjustability, and unmatched testing and performance, these shifters have, once again, set the standard.
Not Yet Reviewed
$408.49
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$15.99
—
$94.99
On Sale
These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.
( 94 )
$139.95
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 5 )
$292.98
—
$1,051.60
Competition Clutch offers Stage 1.5 clutch kits for a variety of applications, including many Toyota, Pontiac, Mitsubishi, Dodge, Nissan, Infiniti, Honda©, and Acura© models from 1990 and up. The kits are an economical solution for moderately modified cars or simply aggressive individuals with stock power. They offer 30-40 percent of torque capacity and maintain stock pedal feel. DO NOT use with added forced induction such as turbo, supercharger, or NOS systems. State 1.5 clutch kits include a Competition Clutch pressure plate, full face organic performance disc assembly, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.
Not Yet Reviewed
$325.00
—
$350.00
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 378 )
$107.99
—
$290.99
These Timken automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 6 )
$8.99
Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 1 clutch kits for street and occasional track use offer a 70 percent increased holding capacity. They utilize reinforced steel-backed copper Kevlar® organic friction material and feature a single diaphragm heavy-duty pressure plate, while maintaining an OEM-like pedal feel and a smooth engagement. These kits are engineered for vehicles that range from stock to basic bolt-on cars, and like all Action Clutch sprung kits, the Stage 1s feature fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine. After assembly, each kit goes through multiple quality checks to ensure quality. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement
( 2 )
$339.96
—
$603.36
Action Clutch flywheels are designed and tested to ensure the best quality and performance. They are SFI certified, which meets the top performance standards in the automotive and motorsports industries. Engineered for street and race applications, Action Clutch chromoly flywheels offer three major benefits: Low weight, low inertia, and high thermal capacity. Made from durable one-piece billet chromoly steel or chromoly steel forgings, they are specifically made for light- to high-tuned racing cars that see drag racing, drifting, autocross, street use, and rally events, and specifically designed for a reduction in weight and inertia for better engine response. Each flywheel has gone through—and passed--engineering tests up to 15,000 to18,000 rpms, and are heat treated for extreme durability, saving you money by resurfacing multiple times.
( 1 )
$267.71
—
$280.46
Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability. Available for a variety of passenger cars, trucks, and SUVs, these Timken wheel bearings will get you back on the road in no time.
( 260 )
$42.99
—
$74.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
