Availability
Take up the slack with Dayco No Slack Idler pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime-lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Idler pulleys.
( 80 )
$23.99
—
$45.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$44.99
—
$54.99
ACDelco V-ribbed serpentine belts resist the penetration of water, acids, and ozone--plus, they provide broad temperature tolerances. Their patented advanced technology design incorporates EPDM rubber, which stays soft and pliable longer than traditional belt materials. Neoprene and certain grades of rubber can harden, causing unwanted squealing and a shorter belt life. The flexible construction of these serpentines allows each belt to withstand many topside and backside bends. ACDelco offers their V-ribbed replacement belts in various lengths, widths, and rib quantities for a wide range of fitments.
( 36 )
$20.99
—
$47.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$38.99
—
$71.99
As the crankshaft flexes, the balancer absorbs incredible amounts of energy. ARP balancer bolt kits will ensure that your balancer is locked into position. They feature a 12-point head that accepts a deep socket to eliminate the fear of stripping the head.
( 619 )
$38.99
Continental OE Technology Series Multi-V belts are factory-style replacements covering virtually all vehicle applications. These new straight-ribbed multi-V belts offer original fit and function that professional technicians appreciate for their customers. The serpentine belts are constructed with advanced EPDM rubber compounds that improve durability and deliver a quieter ride. They're available in well over a hundred lengths, with rib options ranging from three to 14. Order the model recommended for your car, truck, van, SUV, or crossover.
( 325 )
$20.99
—
$42.99
Continental replacement tensioner pulleys are direct replacements for the stock tensioners and are available for a variety of applications. All Continental replacement tensioner pulleys meet or exceed OEM specifications for all major car manufacturers.
( 9 )
$22.99
—
$40.99
Built for passenger cars and light-duty trucks, Dayco Poly Rib serpentine belts are engineered for the high-mileage, demanding drives found in today's vehicles. Dayco's W Profile serpentine belts are the most innovative advancement in serpentine belt design in years. Developed through extensive laboratory and actual road testing, these unique rib profile EPDM belts have been engineered to conform to high-mileage, worn, or misaligned drives and to help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds that resist cracking and perform better in extreme temperature ranges, Dayco Poly Rib serpentine belts deliver more than just OE-required quality. They deliver the solution to troublesome drive problems.
( 183 )
$20.99
—
$34.99
ACDelco Gold tensioner pulleys are high-quality aftermarket replacements for many vehicles on the road today. These components are built from premium materials and will exceed your expectations for fit and performance. Order the model recommended for your vehicle.
( 1 )
$21.99
ACDelco Gold idler pulleys are built to offer reliable operation under severe conditions. They're dependable in any weather or climate offering, you year-round performance. Mounting hardware is included on some popular applications. These pulleys are manufactured to meet or exceed your expectations for fit, form and function. Order the model recommended for your vehicle.
( 13 )
$23.99
—
$34.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$38.99
—
$52.99
These Dorman idler pulleys are a sure way to take up unwanted slack from your serpentine belt. They will ensure proper performance from things such as your water pump, power steering pump, and alternator. Get a set of these high-quality Dorman idler pulleys and keep all of your components functioning properly.
( 33 )
$22.99
—
$51.99
Moroso sport compact oil pan stud kits are designed to simplify pan installation and extend gasket life. They screw into the block and stay there, allowing repeated removal and reinstallation of the pan without stripping aluminum block threads. They have an Allen head socket at one end to facilitate installation. The lock nuts feature attached washers with serrated faces to provide positive grip on the pan rail, and the studs are cadmium and zinc plated to resist corrosion.
( 3 )
$50.99
Take up the slack with Dayco No Slack Tensioner pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Tensioner pulleys.
( 20 )
$23.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 135 )
$20.99
—
$51.99
GMB timing belt tensioner hydraulic assemblies are built to precise tolerances for easy installation and are available for numerous vehicles. When working with timing belts, hydraulic tensioners can ensure proper tension and engine performance. A loss in timing belt tension can be critical to your engine, causing damage or failure. GMB reminds us, "It's never a good idea to compromise on quality". Their hydraulic timing belt tensioner assemblies are rigorously tested to ensure optimal operation and to withstand high-performance use. Choose the proper fit for your vehicle.
Not Yet Reviewed
$49.99
—
$53.99
ACDelco V-ribbed accessory belts are excellent OE-style replacements. These belts use top-quality materials chosen to ensure outstanding resistance to heat and oil—as well as the superior performance that drivers demand. Each ACDelco V-belt is built to provide unparalleled strength and reliability. Choose the size that matches the specs for your car, truck, or van, then notice the improvement in torque just by installing a new V-belt!
( 13 )
$21.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$26.99
—
$54.99
On Sale
aFe ProGuard D2 oil filters are designed to keep dirt, rust, and other contaminants from getting into your engine. They're made from a synthetic composite material that provides excellent filtration and performance. Additionally, each aFe ProGuard D2 oil filter is thoroughly tested to meet your expectations for form, fit, and function.
( 14 )
$36.30
—
$53.90
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 52 )
$26.99
—
$45.99
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 98 )
$42.99
—
$46.99
SKF's timing belt tensioners feature their sealed-for-life design that ensures problem-free operation. They are manufactured with high performance grease to handle high-stress environments with minimum noise and vibration. SKF Bearings timing belt tensioners deliver the quality and design you can count on with proven performance on the most popular applications.
Not Yet Reviewed
$27.99
—
$51.99
Timing chains stretch over time and become slack. Melling timing chain tensioners will retain the efficiency of your timing chain. These quality-built steel components keep your chain under the proper tension for optimum performance in your engine. So, if your old tensioner is allowing your timing chain to "slack off," replace it with a Melling!
( 3 )
$27.99
—
$41.99
Timing belts typically perform well for tens of thousands of miles, but because of the role they play in synchronizing the movement of your camshaft and crankshaft--and, ultimately, pistons and valves--it's better to replace the belt sooner rather than later. ACDelco offers an extensive line of professional timing belts for nearly every make and model on the road. They're built with premium hydrogenated nitrile polymers to resist heat, along with reinforced nylon and Teflon® jackets for longer wear. High-strength tensile standards ensure that each belt can handle stress without breaking. Choose the ACDelco replacement timing belt that matches your vehicle specs … and plan to stay in sync for years!
Not Yet Reviewed
$22.99
—
$40.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
