Availability
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$530.97
That clunking sound you hear beneath your vehicle might be due to a broken exhaust hanger causing your exhaust system to bounce around. If that's the case, don't sweat it—just swap out the bad exhaust hanger with a new one from Summit Racing™. These replacement hangers are available in a variety of materials and styles to best facilitate your repair. Keep your exhaust system securely positioned and attached where it belongs, with quality hangers from Summit Racing™.
( 44 )
$8.99
Summit Racing™ offers replacement radiator caps for a variety of applications. These recovery-style caps feature a heavy-duty design built to handle the pressures of street/strip use. They're compatible with many engine designations, and are available in pressure ranges up to 26 psi. Order the cap preferred for your engine bay.
( 87 )
$5.99
—
$6.99
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 68 )
$63.99
—
$109.98
On Sale
If your vehicle's headlights have seen better days, then grab a set of stock replacements from Summit Racing™. Our light assemblies hook up easily and look and work just like the originals.
( 18 )
$264.99
$238.49
Buick, Chevy, Chrysler, or Dodge—whatever type of vehicle you drive, Summit Racing™ has just the right suspension components, including these loaded strut assemblies. They're application-engineered to your vehicle's unique riding and handling characteristics for better suspension performance. Hundreds of models are available, for fitment on vehicles from the 1980s and up. Summit Racing™ loaded strut assembly features: * Twin-tube, nitrogen-charged design for better performance * Consistent robotic TIG welds * High-range -45 to +450 degree grease applied to all bearings * Strut rod nuts are torqued to OE specs and retain the OE spring compression * Phosphate finished and painted for corrosion resistance * Chrome plated pistons for added life * Neoprene strut boots included * Rubber seat and bumper meet or exceed OEM specifications * High-quality NOK seals * Every unit is put through a 300,000-cycle durability test
( 273 )
$67.99
—
$188.99
On Sale
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$116.99
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 196 )
$76.99
TPMS sensor valve stems work in tandem with your vehicle's tire pressure monitoring system to ensure proper air pressure in your tires. So, if you're in need of a compatible sensor valve stem replacement for a broken or corroded TPMS valve stem, we have them here at Summit Racing™. Choose either a rubber snap-in valve stem or metal clamp-in TPMS sensor valve stem to suit your specific vehicle's application needs.
Not Yet Reviewed
$7.99
Get the stopping power you need for your performance vehicle. Summit Racing™ Ultimate Performance brake pads are low-dust ceramic that improve braking performance and pedal pressure. These pads are offered for a wide variety of applications and provide the excellent stopping power you're looking for.
( 2 )
$32.99
—
$34.99
Summit Racing™ offers Race Series rod bearing sets for a wide range of applications—including many Chevrolet, Buick, Ford, Ram, Jeep, Dodge, Chrysler, and Plymouth small block, big block, and Hemi engines from 1955 and up. The bearings provide a low-friction pivot point between the connecting rod and the crankshaft, and the connecting rod and piston. They keep the crankshaft and connecting rod in place as they rotate. These performance replacements are machined from tri-metal copper-lead alloy and are available in numerous engine crankshaft undersize options. Order the set recommended for your vehicle.
( 3 )
$31.99
Summit Racing Equipment® offers wiring harnesses for a wide range of vehicles—including many Chevrolet, Pontiac, Oldsmobile, and American Motors models from the 1960s and '70s. The factory-style replacement harnesses are ideal for restoration and upgrade projects. They are available to connect and power up a variety of dashboard and accessory functions. Order the wiring harness recommended for your application.
( 2 )
$29.99
Summit Racing™ offers Race Series main bearing sets for a wide range of applications—including many Chevrolet, Ford, Chrysler, Dodge, Jeep, Ram small block, big block, and Hemi engines from the early 1960s and up. Main bearings hold the crankshaft in place and allow it to rotate within the engine block. These performance replacements are machined from tri-metal copper-lead alloy, and are available in numerous upper/lower groove styles and engine crankshaft undersize options. Order the set recommended for your vehicle.
( 3 )
$44.99
—
$88.99
We have put together these Summit Racing™ exhaust gasket and bolts Pro Packs to ensure a leakproof seal for your headers. They feature Fel-Pro Performance exhaust header gaskets made from high-temperature, high-density fiber material around a perforated steel core for durability and heat resistance. To provide a tight seal, we include Stage 8's Grade 8 locking header bolts. They use a patented system that consists of a grooved hex head bolt, a retainer, and a snap clip. The retainer fits over the bolt head and locks the bolt against the header tube, and the snap clip holds the retainer in place. Use one of these Summit Racing™ exhaust gasket and bolts Pro Packs to eliminate blown header gaskets from loose bolts.
( 7 )
$76.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
