Availability
Showing In Stock Items. Show All 42 Items.
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 118 )
$1,332.95
—
$1,479.95
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
These Proform Super-Street roller rocker arms will help rid your engine of internal friction. They feature a race-proven, cage bearing fulcrum and roller tip. The Super-Street rocker arms not only unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. Proform rockers are precision-machined to ensure consistency and ratio accuracy, and they have a great looking anodized finish.
( 123 )
$226.99
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,051.50
—
$1,087.50
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 1 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08, Front sump oil pan HP78 * Melling high volume oil pump * Double roller timing set Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Left Hand inlet reverse rotation water pump (HP08) * Right Hand inlet standard rotation water pump (HP78) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 2,400-2,800 Stall converter * 1,500-6,500 dual plane intake * 80 GPH Fuel pump * 91 plus octane fuel * 680 cfm carburetor
Not Yet Reviewed
$4,765.99
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 41 )
$450.95
These Proform stainless steel oil dipsticks feature an ultra-sleek, thin profile to provide maximum clearance. They are CNC-machined from billet stainless steel to stay bright and rust-free. The dipsticks feature an O-ring seal to keep dirt and moisture out, and the braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 22 )
$52.99
—
$56.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$97.99
—
$99.99
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 44 )
$63.99
PRW fabricated valve covers give your engine an edge and awesome looks. Attention vintage racers, competition junkies, and machining enthusiasts trying to save weight, PRW covers are fabricated from 6061 T-6 aluminum alloy, and have successfully endured rigorous individual pressure testing, proving that they are built to last. Their incredible ability to withstand the harsh elements of racing makes them the perfect solutions for street rod and racing applications. PRW fabricated valve covers are offered in different mounting styles, heights, finishes. They all feature thicker rails and better materials to assure long-lasting durability, and they include fasteners for a no-hassle install.
( 16 )
$233.42
—
$235.30
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 116 )
$64.99
—
$81.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 35 )
$82.99
—
$89.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 130 )
$29.99
—
$261.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 66 )
$78.99
—
$164.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 78 )
$14.99
—
$25.99
PRW High Performance Sportsman harmonic dampers are cast from nodular iron, and are suitable for engines generating up to 400 hp. Unlike most OEM dampers, the hub and ring are splined to prevent radial movement of the outer ring. These dampers are 30 percent stronger than OEM dampers made from gray iron. With the combination of top-quality and affordability, these PWR dampers really raise the bar in the high performance industry. Features and specs include: * Ideal for street rebuilds * Accurate crank bore for a proper pressed-fit * Externally balanced dampers include removable counterweights * Available in black with laser-etched timing marks * Not SFI-certified
( 37 )
$141.90
—
$166.31
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 7 )
$121.99
King HP-Series main bearings are recommended for street and strip performance applications. They're designed for blown, turbocharged, NOS, and alcohol-fueled engines using aftermarket crankshafts. These main bearings have greater eccentricity for superior oiling at high rpm, and a chamfered surface for large radii crankshafts. HP-Series bearings also feature large, chamfered oil holes—and are available in 1/2 grooving for improved oiling to withstand high-rpm applications. Order the bearings designed for fitment with your specific engine.
( 47 )
$72.99
—
$85.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 88 )
$13.99
—
$18.99
Keep your oil clean longer with Bosch premium oil filters. They utilize Bosch FILTECH media technology, a blend of natural and synthetic materials for superior filtration and increased engine wear protection. Premium FILTECH oil filters have a larger filtering area and can screen out more harmful contaminants than a conventional filter. Strong steel base plates and housings ensure a sturdy fit with no warping or leaks, and a silicone anti-drainback valve ensures a supply of clean oil when starting your vehicle. You can count on Bosch for dependable oil filtration that surpasses the competition.
( 13 )
$12.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$164.99
Get the most from your hard-earned dollars with Silv-O-Lite hypereutectic pistons. These pistons utilize aluminum alloy high in silicon for greater strength plus scuff and seizure resistance. Silv-O-Lite pistons have improved groove wear and resist cracking in the crown area where operating temperatures are severe. Silv-O-Lite hypereutectic pistons feature reinforced top lands and their proprietary process of diamond finished skirts. These aftermarket pistons are available for many applications from your light truck to your auto or import. Spend wisely and choose replacement pistons that will work hard for you--Silv-O-Lite hypereutectic pistons.
( 66 )
$197.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 7 )
$88.99
—
$145.99
Available for a wide selection of popular engines, Proform chrome engine oil dipsticks kits consist of both the stick and the tube. These kits have classic hook handles.
( 92 )
$13.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
