Availability
Edelbrock knows carbs. That's why they offer these calibration kits for Performers series carburetors. They include all the parts you need to help you get the best performance from Edelbrock carburetors.
( 196 )
$37.95
Moeller Marine anti-siphon valves combine anti-siphon protection with a convenient hose barb design. Available in aluminum or brass, you also have a choice of barb size and calibration. Federal law requires the use of anti-siphon protection on permanent fuel tank installations if the hose dips below the top of the tank. Meet the required standards with Moeller anti-siphon valves.
( 1 )
$13.99
—
$20.99
Designed and calibrated from Edelbrock for use in marine applications, these Edelbrock carbs comply with U.S. Coast Guard safety standards. Cast surfaces are protected by a Chromate conversion coating which is used as a corrosion inhibitor. Other features include modified bowl venting, specially designed throttle shafts, an accelerator pump seal, a 3/8 in. inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, a 5 1/8 in. flame arrestor flange, a universal throttle lever, and revised secondaries for improved transient performance. Also included with every Edelbrock carburetor are instructions for installation, set up, and basic tuning.
( 71 )
$621.95
Holley Marine Avenger carburetors feature all-aluminum construction with a gray hardcoat anodized finish for corrosion resistance and tough style. They're J1223 marine certified, have PTFE coated throttle shafts, and come available in different sizes to match your boat's needs. Holley recognizes and calibrates for the unique loads that boats endure and uses 4-corner adjustments through dual metering blocks. Quickly get to your favorite fishing hole with Holley Marine Avenger carburetors.
( 18 )
$749.95
Ahoy! If you're looking for a simple, powerful solution for high performance boating, then these Davis Unified Ignition marine D.U.I. distributors from Performance Distributors are the answer. These virtually waterproof and vibration-proof distributors are easy drop-in units with one-wire hookup. There are no wiring hazards to leave you adrift and no hassles! The electronic Dyna-Module and high-voltage coil are built inside of the distributors and produce a longer spark duration, allowing you to widen your plug gap and get a more complete fuel burn. Marine D.U.I. distributors are available in performance versions that crank up to 7,000 rpm and racing versions at 10,000 rpm. D.U.I. distributors are calibrated by machine to dial-in the smoothest advance curve for your application. They are hand-assembled, polished, lubed, and checked for exact tolerances, and the housings are drilled with flame arrestor holes. All of these features allow you to navigate with instant throttle response and more power. Whether you're taking a leisurely ride around the lakes, offshore cruising, or running the waves, anchor your boat with high performance marine D.U.I. distributors from Performance Distributors.
( 72 )
$399.00
—
$565.00
You'll notice a definite difference in power with AED Marine Series carburetors. They're hand-built and calibrated for marine use to specifications for a balanced fuel curve. Featuring AED custom billet marine metering blocks, the carbs are test-run and blueprinted for maximum performance, right out of the box. You'll like the improved throttle response and crisp revs. If you're picky about how your boat runs (and looks), go with AED HO-Series.
Not Yet Reviewed
$689.95
—
$759.95
Clearance
If you're still wondering how much gas is really in your tank, Sierra fuel level sending units replace the guesswork with dependable answers. These swingarm, electric fuel gauge sending units gather fuel level information from a float which is read on a dash-mounted gauge (sold separately). The fuel level sending units require connection to a dash mounted gauge. They're calibrated to the industry-standard of 33 to 240 Ohm gauges. Internal measurement components will not rust or corrode. Key features: * Simply measure your tank depth to get the correct swingarm float length for an accurate fuel level * Float rotates for tank wall and baffle clearance * Calibrated to the industry-standard of 33 to 240 Ohm gauges * Internal measurement components will not rust or corrode * Complete with 5-hole gasket and screws * Swingarm readings are subject to fuel-slosh fluctuations
Not Yet Reviewed
$67.99
$47.50
Eddie Marine fuel level senders are accurate. They have no moving parts to wear out or cause inaccuracies. They utilize the same 5-hole SAE bolt pattern and resistance (240-33 ohms) as marine float-type senders. Offered in three lengths, they may be cut to desired length and calibrated for your specific tank. Eddie Marine fuel level senders eliminates excessive needle bounce and are user-adjustable.
( 1 )
$179.00
Ahoy! If you're looking for a simple, powerful solution for high performance boating, then these marine D.U.I. (Davis Unified Ignition) distributors from Performance Distributors are the answer. These virtually waterproof and vibration-proof distributors are easy drop-in units with one-wire hookup. There are no wiring hazards to leave you adrift and no hassles! The electronic Dyna-Module and high-voltage coil are built inside of the distributors and produce a longer spark duration, allowing you to widen your plug gap and get a more complete fuel burn. Marine D.U.I. distributors are available in performance versions that crank up to 7,000 rpm and racing versions at 10,000 rpm. D.U.I. distributors are calibrated by machine to dial-in the smoothest advance curve for your application. They are hand-assembled, polished, lubed, and checked for exact tolerances, and the housings are drilled with flame arrestor holes. You'll navigate with 50,000 V of pure energy for instant throttle response and more power. Whether you're taking a leisurely ride around the lakes, offshore cruising, or running the waves, anchor your boat with high performance marine D.U.I. (Davis Unified Ignition) distributors from Performance Distributors.
Not Yet Reviewed
$479.00
—
$575.00
On Sale
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 66 )
$5,184.99
—
$5,542.99
Sierra Marine offers replacement toilet pump level indicators to rebuild or repair your marine or RV toilet at a fraction of the cost of buying new. Meant for use for a Sani-Sump pump, these Dometic pump level indicators are constructed from durable plastic, uses two raw wire connections, and has been calibrated to the industry standard of 10-180 Ohms. Whether you need a complete toilet rebuild kit or a few replacement parts, you'll find what you need in Sierra's selection of O-rings, bellows, duck bill valves, and more.
Not Yet Reviewed
$111.99
Holley Gen 3 Ultra Dominator Marine carburetors are designed for use on marine high-horsepower engines. They utilize high-capacity fuel bowls with 20 percent more fuel capacity to eliminate starvation, an integrated fuel shelf to minimize fuel aeration, and internal baffling to control fuel slosh. The patent-pending Gen 3 main body is 5/16 in. taller than the previous generation, allowing for larger radius air entries—which are optimized using Computational Fluid Dynamics (CFD) software to deliver smoother flow into new fully machined, big bore venturi. Other features include all-aluminum construction, 12-hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand-adjustable) curb idle screws. Each calibration has been dyno-tested to deliver proven performance! Additional features include: * Gray anodized finish with black anodized billet aluminum metering block and booster inserts * Fully machined from venturi throat to throttle bore for predictable and repeatable performance * Metering blocks feature true gasket sealing and fully adjustable emulsion bleeds, power valve channel restrictors, and idle feed restrictors * Dual 50cc accelerator pumps provide the perfect amount of fuel from idle to full throttle * Clear sight windows on both sides of bowls for easy and safe fuel level adjustments * Built-in drain plug in front center of bowl provides easy access to empty contents of bowl * O-ringed inlet threads offer a large variety of plumbing options and can be plumbed from either side * Factory-ready TPS mounting points for use with data acquisition systems (Holley TPS part number 534-214 available) * Contoured hex head squirter screws for streamlined airflow * Fully adjustable stainless steel external linkage can be adjusted for 1:1 progressive or soft progressive throttle activation (no linkage parts under the carburetor) * J-style vent tubes * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
Not Yet Reviewed
$1,999.95
Quick Fuel M-Series carburetors launch high performance for your watercraft. QFT marine performance carburetors are specifically engineered for the positive and smooth fuel delivery that's vital to your power boat. M-Series carburetors all feature billet metering blocks for exceptional strength, interchangeable air bleeds, restrictions for fine tuning, and PTFE coated throttle shafts and bearings for smooth throttle response. Plus, they offer aluminum fuel bowls with integral sight glass windows, marine J-style vent tubes, and QuickLink secondary linkage for fast and easy changes in throttle opening rates. QFT applies a protective coating to the main carb body and fuel bowls to prevent corrosion in harsh marine environments. They are available in several cfm models, as well as a couple of special models calibrated for Roots-style 2 x 4 supercharged engines and large-displacement engines. Quick Fuel M-Series marine carburetors are hand-assembled and run-tested on real engines for precise fuel delivery and ultimate precision on the water.
( 2 )
$1,049.95
Moeller Marine Reed switch fuel level senders dramatically reduce "slosh fluctuations" which are inherent with swingarm units. These Reed-style fuel level senders work with gas, ethanol, diesel, biodiesel, and non-potable water. They're designed for all types of marine vessels, and they top-mount in aluminum, plastic, or stainless steel fuel tanks. Order the Moeller Marine Reed switch fuel level senders that best fit the depths of your tanks. Features, items, and specs: * Sender length designed to be 1 in. shorter than tank depth * Engineering-grade, thermo-polymer, and fully adjustable * Stainless steel/nitrile rubber float construction provides efficient performance and corrosion resistance both inside and outside the tank * Fuel measurements taken from float; collects fuel information more consistently than swingarm senders * Includes Moeller Marine fuel tank sender mounting kit (5-hole gasket set) * Product line fits tank depths ranging from 6 to 60 in. (152.4mm to 1,524mm), depending on model * Calibrated to industry standard of 33-240 ohms * Direct-fit OEM sender replacement by Rochester
( 5 )
$78.99
—
$136.99
Moeller Marine offers a comprehensive line of fuel level gauges designed for top mounting in aluminum, plastic or stainless steel fuel tanks on all types of marine vessels. The dash-mounted electrical gauges feature an illuminated back dial with bold graphics for accurate readings—day or night; a chrome bezel; and the fuel tank level is displayed by a contoured analog pointer on calibrated dial. These gauges are compatible with all Moeller and most U.S. ohm range sending units (sender unit is sold separately). Additional fuel level gauge features: * Designed to fit standard 2 in. instrument dash mounting hole * Installation diameter 2 1/16 in. * Functions: Fuel tank level (E - 1/2 - F) * Exceeds current NMMA and ABYC specifications
( 1 )
$38.99
Moeller Marine universal Reed array fuel tank sending units work with gas, ethanol, diesel, biodiesel, and non-potable water. They're designed for all types of marine vessels, and they top-mount in aluminum, plastic, or stainless steel fuel tanks. Order Moeller Marine universal Reed array adjustable sending units for your marine tanks. Features, items, and specs: * Available with or without gauge * Ethanol-compliant * Includes Moeller Marine fuel tank sender mounting kit (5-hole gasket set) * Pre-bent 90 degree float arm * Fits tank depths ranging from 6 to 24 in. (152mm to 610mm) * Calibrated to industry standard of 33-240 ohms * Exceeds current NMMA and ABYC specifications
Not Yet Reviewed
$57.99
Holley 4160 marine carburetors include all of the same features as their street cousins--plus a few more that make them adaptable and legal for marine use. Primary differences include fuel bowl vent tubes, sealed throttle shafts, and universal marine calibration. Plus, they are designed to meet flooding and backfire requirements as defined by the U.S. Coast Guard. Other than that, they're typical Holley quality all the way, with a square bore flange, vacuum secondaries, single or dual fuel inlets, an electric or manual choke, 30cc accelerator pumps, and a 5 in. airhorn (unless noted otherwise). And last but not least, you can choose between universal or direct fit OE replacement versions.
( 10 )
$899.95
Moeller Marine swingarm mechanical fuel sending units gather fuel level information from a float, which can be read on their direct-site gauge. Available for 7 1/2 in. to 22 in. tank depths, they're calibrated for compatibility with an optional dash-mounted gauge. Moeller Marine swingarm mechanical sending units are suitable for gas, ethanol, diesel, biodiesel, and non-potable water in all types of marine vessels. Includes: * Direct-site gauge * Moeller Marine fuel tank sender mounting kit (5-hole gasket set) * Calibrated to the industry standard of 33 to 240 ohms
Not Yet Reviewed
$92.99
—
$101.99
Ahoy! If you're looking for a simple, powerful solution for high performance boating, then Davis Unified Ignition marine EFI D.U.I. distributors from Performance Distributors are the answer. These virtually waterproof and vibration-proof distributors are easy drop-in units with one-wire hookup. Converting your remote mount coil is easier than ever with no wiring hazards to leave you adrift and no hassles! A plug-in adapter is included. The electronic Dyna-Module and high-voltage coil are built inside of the distributors and produce a longer spark duration, allowing you to widen your plug gap and get a more complete fuel burn. D.U.I. distributors are calibrated by machine to dial-in the smoothest advance curve for your application and are hand-assembled. If space is a factor, choose the remote mount coil-style distributors. You'll navigate 50,000 V of pure energy for instant throttle response and more power. Whether you're taking a leisurely ride around the lakes, offshore cruising, or running the waves, anchor your boat with high performance marine EFI D.U.I. distributors from Performance Distributors.
Not Yet Reviewed
$259.00
—
$389.00
Moeller Marine fuel level conversion capsules convert your swingarm mechanical sending unit's fuel level reading from a standard direct-sight gauge to a standard electric dash-mounted gauge. They're designed for tanks from 7 1/2 in. to 22 in. deep. Get your fuel level readings more conveniently—at the helm—with a Moeller Marine fuel level conversion capsule. Features and items: * Calibrated to industry standard 33-240 ohms * Includes Moeller Marine fuel tank sender mounting kit (5-hole gasket set)
Not Yet Reviewed
$101.99
Get ready to take to the sea with FAST EZ-EFI Marine self-tuning fuel injection master kits. With proven performance and reliability on land, those same attributes are ready for the water—upgrading the poor starting and rough cold running often associated with boat engines utilizing carburetors, while also improving overall performance, fuel economy, and drivability. FAST EZ- EFI Marine self-tuning engine control systems are powdercoated blue with a laser-etched FAST logo. These all-inclusive kits feature: * Diecast 4150-style, 4-injector throttle body that supports up to 650 hp * ECU * Hand-held color touch screen serves as a setup wizard, as well as an electronic gauge screen * Oxygen sensor bung * Inline fuel system * Integrated fuel rail design and crossover
Not Yet Reviewed
$2,969.95
FAST EZ-EFI marine base kit fuel injection systems upgrade the rough idle and poor cold starting often associated with engines running a carburetor, while improving overall performance and drivability. Simply hook them up, answer the basic Wizard setup questions on the included hand-held display, and the systems truly tune themselves--no experience or laptop is needed. These complete kits include a blue ECU specific to the application, a hand-held color touchscreen, specialized O2 sensor bung, and a die-cast 4150-style, 4-injector throttle body that supports up to 650 hp. They easily bolt on to engines using a 4150-style carburetor, while allowing users to keep running their current ignition system. FAST EZ-EFI systems feature the best performing, most reliable, and most advanced tuning on the market.
( 1 )
$2,875.95
—
$3,128.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
