Availability
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 401 )
$380.95
—
$825.95
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1214 )
$112.99
—
$344.99
Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.
( 285 )
$217.95
—
$249.95
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 324 )
$499.95
—
$549.95
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 120 )
$449.95
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 147 )
$212.95
$125.95
—
$465.95
MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.
( 32 )
$468.95
—
$499.95
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 114 )
$435.95
—
$477.95
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 164 )
$188.99
—
$231.99
Manufacturer Rebate
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 252 )
$165.50
—
$383.00
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 22 )
$346.99
—
$359.99
Replace your stock LT1 Optispark distributor with our all-new Summit Racing™ LT1 Optispark I or II distributors. These distributors feature an aluminum housing with heavy-duty oilite bushings, and a glass-reinforced cap with high dielectric strength and aluminum terminals.
( 121 )
$240.99
—
$261.99
The MSD Pro-Billet HEI distributors pick up where the originals left off. Drawing on years of high-performance ignition experience, MSD engineers created a unique ignition module and internal coil that are capable of running above 9,000 rpm. Stock and other aftermarket modules lose spark energy at about 4,500 rpm. These modules produce 50 percent more current than stock units, and deliver a much more precise timing signal as well as more dwell control. The coil delivers over 100 millijoules of energy across the plug gap. For strength and high rpm stability, the QPQ-treated oversized shaft is guided by a sealed ball bearing on top and long sintered bushing at the bottom. The QPQ coating provides a low-friction coating on the shaft and also makes it highly resistant to corrosion. TIG welded to the top of the shaft is an adjustable mechanical advance assembly. The distributors are supplied with extra springs and stop bushings, so you can tailor an ignition curve to match your driving needs. The advance assembly features chromoly weights that slide on nylon pads for smooth timing advancement through the entire rpm range. There is also a vacuum advance canister to improve economy while cruising. All of these features are enclosed in a great looking, billet aluminum housing that is CNC-machined for accuracy and incredible strength. The distributors come complete and ready to drop in with a high-quality rotor and cap with brass terminals for great spark transfer. Simply connect a 12 V source to the distributor and you're up and running. They're designed to replace GM HEI distributors that use a 4-pin ignition module.
( 38 )
$649.95
—
$699.95
MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.
( 16 )
$699.95
—
$799.95
Gain serious firepower with GM Street/Strip D.U.I. distributors from Performance Distributors. These fire sticks have everything you need for your ignition in one simple, but strong unit. They offer an easy, one-wire hookup--no external coils or spark boxes, just one 12 V hot wire hookup for 50,000 V of pure spark energy and a cleaner, crisper, more powerful-running engine. Their Dyna-Module, along with the high-voltage coil, allows spark plug gaps to be opened up, increased dwell for longer-duration spark, and the most complete combustion of your fuel mixture for increased horsepower and torque. Plus, the caps have brass terminals for optimum conductivity and are available in several colors, including clear, so you can see the firepower at work. Feel the power; experience Performance Distributors GM Street/Strip D.U.I. distributors.
( 141 )
$349.00
—
$459.00
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 35 )
$499.95
—
$528.95
Finally, all-out performance distributors to replace the OEM GM LT1 Optisparks--MSD's Pro-Billet LT1 distributors. They feature a precision-machined billet aluminum housing that fits in place of the factory piece, a new pickup assembly, a trick timing adjustment mechanism, and a new MSD distributor cap and rotor. The pickup is an advanced optical encoder that has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft, and is stabilized through the use of a large ball bearing assembly. The distributors use an adjustment screw to advance or retard the timing by up to 5 degrees.
( 64 )
$799.95
Ahoy! If you're looking for a simple, powerful solution for high performance boating, then these Davis Unified Ignition marine D.U.I. distributors from Performance Distributors are the answer. These virtually waterproof and vibration-proof distributors are easy drop-in units with one-wire hookup. There are no wiring hazards to leave you adrift and no hassles! The electronic Dyna-Module and high-voltage coil are built inside of the distributors and produce a longer spark duration, allowing you to widen your plug gap and get a more complete fuel burn. Marine D.U.I. distributors are available in performance versions that crank up to 7,000 rpm and racing versions at 10,000 rpm. D.U.I. distributors are calibrated by machine to dial-in the smoothest advance curve for your application. They are hand-assembled, polished, lubed, and checked for exact tolerances, and the housings are drilled with flame arrestor holes. All of these features allow you to navigate with instant throttle response and more power. Whether you're taking a leisurely ride around the lakes, offshore cruising, or running the waves, anchor your boat with high performance marine D.U.I. distributors from Performance Distributors.
( 72 )
$399.00
—
$479.00
On Sale
These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.
( 55 )
$476.95
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$499.95
If your racecar, Corvette, or race Corvette requires a distributor with a mechanical tach drive, these Pro-Billet Tach Drive distributors from MSD are what you need. Their race-proven magnetic pickup delivers precise trigger signals to your MSD ignition every time one of the reluctor's precision paddles pass by. This reluctor assembly is connected to an oversized steel shaft for increased strength and endurance, and is responsible for triggering the magnetic pickup. Inside the stout billet 6061-T6 aluminum housing, a sealed ball bearing and long sintered bushing guide the 0.500 in. steel shaft for high-rpm accuracy. Just above the reluctor is an adjustable mechanical advance assembly that lets you tailor a timing curve to match your engine's needs. This assembly is TIG welded for strength, and features chromoly weights and nylon pads to ensure smooth advance as the rpm increases. Corvette models feature a vacuum advance, and are available with or without an adjustable slip collar for engines that have had the deck height modified or use exotic intake manifolds. The distributors also feature a Rynite base. The tach drive assembly has a grease fitting for lubrication, is compact to clear the firewall and linkage, and can be repositioned easily to fit different applications. These distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition.
( 10 )
$669.95
MSD recognized the need for a true marine performance distributor and built these Pro-Billet marine distributors to answer this need. Marine environments place rigorous demands on every component of the ignition system, especially the distributor. The combination of water spray, salt exposure, full throttle acceleration, and harsh vibrations all take their toll. The housing is CNC-machined from billet 6061-T6 aluminum, creating a housing with no porosity or weak areas. Internally, a Tuftride coated steel shaft is guided by a sealed ball bearing and an extra-long sintered bushing for high-speed stability and endurance. Each distributor uses MSD's race-proven magnetic pickup to trigger the ignition control. The pickup receives its signal through a precision-manufactured reluctor that is attached to the shaft. The mechanical advance assembly receives a QPQ plating for long lasting resistance to corrosion in marine environments. Their mechanical advance assembly is easily adjustable, so you can dial-in an ignition curve to match your boat's application. Three additional sets of advance springs and stop bushings are included with detailed instructions, making adjustments easy to perform and understand. The distributor cap is bolted and sealed to the aluminum base, and has two flame arrestor holes with brass screens machined into the base of the distributor. This design works to prevent ignition of gas fumes that may build up in the engine compartment. A special weathertight connector is supplied to provide a positive lock and water-resistant connection. This heavy-duty connector will withstand high temperatures and water, and plugs directly into the MSD 6M-2 or 7M-2 ignitions. The distributors come complete with a high-quality, bolt-down alkyd cap and MSD's racing rotor. These high-quality distributors have been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard. They require the use of a separate ignition box.
( 4 )
$549.95
—
$632.95
Replace your tired stock distributor with a brand new Summit Racing™ Vortec distributor and you'll get more power than you ever expected out of your ignition at a price that can't be beat. The distributors have heavy-duty features like a balanced rotor, aligned bronze oilite bushings for extended street use, and a cast aluminum housing that's machine-finished. They have a magnetic trigger for a consistent, powerful spark and a blue cap with brass terminals for excellent spark transfer. Each distributor is dynamically tested, so you can trust that you're getting a high-quality distributor.
( 161 )
$176.99
If you have a computer-controlled engine, Davis Unified Ignition GM computer-controlled distributors are the replacements that you need. They are built with all-new parts to ensure durability and performance. GM computer-controlled D.U.I. distributors feature brass terminal caps and rotors for maximum conductivity, nylon rotor hold-down screws to prevent high-rpm misfires, and oil-impregnated brass bushings for long-lasting life. These one-piece versions utilize a Dyna-Module and a high performance coil for excellent spark and firepower. GM computer-controlled D.U.I. distributors are also shimmed for proper endplay clearance to ensure maximum magnetic pick-up coil inductance. These units are easy to install, plugging directly into your factory wiring, and are polished for a high-tech appearance. Replace your existing distributor with one of these GM computer-controlled distributors from Performance Distributors. You'll be happy that you did.
( 50 )
$239.00
—
$375.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
