Transmission & Drivetrain
Availability
Building awesome horsepower is only part of the story. You need to deliver all that power to your car or truck’s wheels! We’ve got torque-hungry high performance automatic...
Building awesome horsepower is only part of the story. You need to deliver all that power to your car or truck’s wheels! We’ve got torque-hungry high performance automatic and manual transmissions for street and strip applications, torque converters and clutch sets, flexplates and flywheels, plus limited-slip differentials, spools, lockers, ring and pinion sets, driveshafts, U-joints, axles, bearings, C-clip eliminator kits, transfer cases, shift kits, and rebuild kits. We also have a wide selection of trans-brakes, shifters, cables, and accessories—everything you need to put the power to the ground, Summit style.
Building awesome horsepower is only part of the story. You need to deliver all that power to your car or truck’s wheels! We’ve got torque-hungry high performance automatic and manual transmissions for street and strip applications, torque converters and clutch sets, flexplates and flywheels, plus limited-slip differentials, spools, lockers, ring and pinion sets, driveshafts, U-joints, axles, bearings, C-clip eliminator kits, transfer cases, shift kits, and rebuild kits. We also have a wide selection of trans-brakes, shifters, cables, and accessories—everything you need to put the power to the ground, Summit style.
Showing In Stock Items. Show All 223 Items.
Strange Ultra Struts are for drag racing only and should have a yearly inspection of the wheel bearings and seals. When they need replaced, service them with genuine Strange wheel bearing and seal kits for optimal performance on the track.
Not Yet Reviewed
$179.99
Many racers would argue that a Chevy Powerglide transmission, when matched with the proper rear gear, is the quickest and most consistent of all existing transmission designs. ATI Performance adapter kits allow Ford, Chrysler, and import owners to also benefit from GM trannys by eliminating the hours of expensive modifications necessary to mate GM transmissions with non-GM engines. Each of these kits includes an ATI adapter plate, a crank adapter, a flexplate, and all necessary mounting hardware.
( 6 )
$604.44
—
$629.50
Lakewood manual transmission installation kits allow you to complete your LT engine swap with a fun-to-drive T56 manual transmission. Specially prepped to fit your vehicle, these kits include all necessary fasteners and spacers needed to install a GM T56 Magnum or 1998 to 2002 GM LS T56 transmission to the popular L83-L84 Gen V engine. The spacers provided in the kit retain OE specs when using a single disc clutch. These kits include the bellhousing spacer, hydraulic release bearing spacer, transmission dowels, pilot bearing, bellhousing bolts, and hydraulic release bearing bolts.
Not Yet Reviewed
$292.95
Chevrolet Performance transmission installation kits connect your engine to your transmission. They are available for several applications and each includes flexplate, covers, fasteners, and instruction sheet. Install your transmission with Chevrolet kits.
Not Yet Reviewed
$3,916.25
We matched up high performance clutch parts to form these Summit Racing™ clutch, flywheel, and mounting hardware Pro Packs. They're available for hundreds of Ford, GM, and Mopar applications from the 1950s and up. Convenient and economical, Summit Racing™ Pro Packs save you the legwork with the correct parts to complement each other. Pro Packs include: * RAM HDX series clutch kit * Billet steel flywheel * Hydraulic throwout bearing * Pressure plate bolts and flywheel bolts
( 3 )
$877.10
—
$1,131.10
Holley offers complete T56 transmission installation kits for a variety of engine applications. These kits come complete with everything you need to bolt a GM-style Tremec T-56 or Magnum transmission to almost any Gen III or Gen IV small block Chevrolet engines with a 6- or 8-bolt flywheel. Built with a mixture of Holley's best brands, including Lakewood and Hays, each kit includes a bellhousing, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, roller pilot bearing, and all hardware needed to install these components. * Kit 319-510 is set up to be used with the 6-bolt flywheel LS engines, which are the majority of the Gen III and Gen IV engines produced before 2009 (LS1, LS2, LS3, LS6, LS7, LM7, LQ9, L33, and similar truck engines). * Kit 319-511 is set up to be used with the 8-bolt flywheel LS and Gen V LT engines that come after 2009 (LSA, LT1, LT4, L83, and similar truck engines). Product features: * Lightweight cast aluminum bellhousing and stamped steel dust cover provides factory-like installation and appearance * Billet steel flywheel for light weight (28 lbs.) and additional strength * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * 26-spline, 12 in. organic sprung clutch offers superior clamping force and smooth engagement for engines up to 550 naturally aspirated horsepower (500 with power adder) * Adjustable hydraulic release bearing offers reduced pedal effort and easy installation * Works with original equipment or MSD high torque starters * All hardware included (flywheel, transmission, and engine connections)
Not Yet Reviewed
$1,449.95
Made of high-quality materials and manufactured to strict engineering standards/specifications, Rein OE Quality manual transmission bolt sets fit European vehicles the way the original manufacturer intended. They feature aluminum construction and are designed to be direct replacements for the original bolts. Rein bolt sets are supplied with all the necessary bolts and torque specs to ensure that the job is done right.
( 1 )
$16.99
Holley transmission installation kits come complete with everything you need to bolt a TKX or TKO transmission to a 28- or 50-ounce externally balanced small-block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include: a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5 lb., 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included
( 2 )
$1,799.95
—
$1,899.95
Holley transmission installation kits come complete with everything you need to bolt a T5 transmission to a 28- or 50-ounce externally balanced small block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5-pound, 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included
Not Yet Reviewed
$2,149.95
Derale standard automatic transmission filter kits are engineered to work in conjunction with the OEM transmission filter. These systems prevent any foreign particles from entering the valve body or other internal components, while maintaining the fluid and removing any varnish, sludge, or contaminants. Derale Performance standard kits include: * Aluminum filter mount * Derale spin-on transmission filter * OEM-spec oil hose * Brass fittings * Stainless steel hose clamps * All necessary hardware
( 31 )
$84.47
—
$168.05
Silver Sport hydraulic clutch master and slave kits are designed for use with the aftermarket Tremec Magnum 6-speed and Tremec T5, TKO, and TKX 5-speed transmissions. Each kit provides up to a 20 percent lighter clutch pedal effort compared to mechanical linkage, creates more room for headers, and cleans up your engine bay. The SST kits feature custom master cylinder mounts to take out the guesswork for the correct pushrod angle and an OEM-style, proprietary designed release bearing. It's rated at 7,000 rpms, has a forged aluminum housing, silicone dust boot, piston wiper seals, and a 1,000,000 cycle service life. Silver Sport complete hydraulic kits include: * Master cylinder * Master cylinder mount * Pedal pushrod/mounting components * Reservoir * Hoses * Concentric slave cylinder (slave cylinder/release bearing assembly) * Hardware * Detailed instructions
( 6 )
$649.95
—
$659.95
Chevrolet Performance has taken the hassle out of transmission installation. Clutch kits are available on their own, or with other key components you need to complete the job more easily. Choose the kit that's appropriate for your particular transmission—and experience a faster installation utilizing the quality Chevrolet Performance parts included.
( 2 )
$1,645.40
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$3,995.95
—
$4,559.95
Chevrolet Performance automatic transmission installation kits are designed to install a modern transmission into your application. These kits help make installation a breeze. If you are converting or upgrading your ride, Chevrolet Performance automatic transmission installation kits are what you need.
Not Yet Reviewed
$471.59
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,487.50
—
$2,006.00
Hooker Blackheart engine mount hardware kits include high-grade zinc coated bolts to complete the installation accurately. Order the fasteners recommended for your engine application.
( 4 )
$11.62
Introducing the new Centerforce SST (Solid Street Twin) clutch and flywheel kits—engineered and developed for vehicles producing 400 to 925 lbs.-ft. of torque. The SST discs utilize solid hubs to reduce the rotational weight on the input shaft for quick clean shifts. The discs in the assembly are built using high-quality friction materials, for smooth engagement and longevity. These SST clutch and flywheel kits feature a lightened billet steel flywheel, providing low inertia resulting in quicker rpm and the Centerforce anti-rattle system to reduce floater rattle/noise. In addition, no complicated setup or adjustments are required, just bolt in the clutch and flywheel kit application you need—and "get a grip"! For streetcar enthusiasts looking for a high-quality Twin disc clutch system, the Centerforce SST clutch and flywheel kits are an economical choice. Key features and benefits: * Positive drive floater * Easy pedal * Precision balanced * Smooth engagement * Spec card included * ARP hardware * Solid hub for light weight and quick shifts * Simple install
( 5 )
$1,259.95
—
$1,396.95
Tilton's 6-leg 5.5 Ultra clutch assemblies are a direct replacement or upgrade for the QM Optimum clutch—and they're Tilton's lightest weight 5.5 in. metallic racing clutch. The Ultras are designed and manufactured using proprietary materials and processes that increase service life of the clutch internals. They feature a rigid clutch cover that resists deflection, plus hardened steel thrust buttons installed into the legs—thus providing the most durability and highest performing clutch for the money, bar none. These clutches are rated for 500 lbs.-ft. of torque for two plate assemblies, and up to 750 lbs-ft. for three clutch units.
Not Yet Reviewed
$1,164.50
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,750.95
—
$5,025.95
If you're into aggressive street driving and occasional track driving, McLeod Street Extreme clutch kits hold up to 700 lbs.-ft. of torque with street tires and moderate engine mods. These SFI-approved packages are the perfect upgrade for high-horsepower Mustangs (and other cars) that need reliable shifting on the street and the track. They feature a dual-faced ceramic friction disc, high clamp load pressure plate, pilot tool, throwout bearing, and pressure plate bolts (where applicable). You can run your pony with complete peace of mind. Street-friendly and track-proven, a McLeod Street Extreme clutch kit is your best decision. Order the model recommended for your application.
( 48 )
$365.00
—
$425.00
C-clip eliminators, which were originated by Strange Engineering, are required by drag racing rules for good reason. C-clip type axles are retained by a clip above the spline portion of the axles. When the stock axle or differential breaks, the entire axle/brake/wheel assembly can slide completely out of the housing. Strange's C-clip eliminators eliminate wheel loss and worn bearing areas. The bearings are retained and the axles are held securely in place by the C-clip eliminators, which are bolted to the stock axle housing through the existing backing plate holes.
( 24 )
$284.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 375 )
$129.99
—
$833.99
Tilton Sport 5.5 clutch assemblies are a direct replacement, and upgrade, for the QM V-Drive clutch. These value-packed Sport 5.5 clutch assemblies are designed and manufactured using proprietary materials and manufacturing processes that increases service life of the clutch internals. Featuring a rigid clutch cover that resists deflection, with hardened steel thrust buttons installed into the legs, these Tilton Sport 5.5 clutch assemblies provide the most durability and highest performing clutch for your money—bar none.
Not Yet Reviewed
$896.75
Experience the benefits of a modern hydraulic clutch system—with improved drivability and reduced maintenance requirements—courtesy of Holley's new line of hydraulic clutch conversion kits. These throwout bearing conversion kits are designed specifically for Chevrolet Camaro and Pontiac Firebird models and allow for easy conversion from a mechanical clutch linkage to a modern hydraulic clutch system. They include all necessary components for a straightforward installation: clutch master cylinder, clutch pedal with pad, clutch rod assembly, master cylinder mount and reinforcement plate, master cylinder reservoir kit, and all required mounting hardware. Pedal ratios have been optimized for perfect pedal feel and full engagement of the clutch system. With so many engine and transmission combinations available, Holley has left it up to the installer to decide on which release (or throwout) bearing and hydraulic lines will be used. The Holley hydraulic conversion kit is engineered to fit each model perfectly, ensuring a trouble-free installation and optimal performance. Each kit offers several advantages over traditional mechanical clutch linkage systems. First and foremost, they provide a smoother and more precise clutch engagement, resulting in improved drivability and reduced wear and tear on clutch components. Additionally, the hydraulic system eliminates the need for periodic adjustments and maintenance that are typically required with mechanical clutch linkages and the use of many modern transmissions such as the T56, TR6060, Magnum, TKX, TKO, and classic 4-speeds. Order the conversion kit recommended for your vehicle.
( 1 )
$349.95
—
$373.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
