2004 SUBARU Transmissions Transmission & Drivetrain

ACT Heavy-Duty Clutch Kits

ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.

4.54 out of 5 stars ( 87 )

$565.00

—

$861.00

Exedy OE Flywheels

Exedy offers OE flywheels for a variety of applications, including many Honda©, Acura©, Subaru, Scion models from early 2000s and up. Flywheel hot spots can cause chatter—and resurfacing a flywheel doesn't always remove hot spots. The flywheel may appear fine, but the hot spots will often still be there. These stock replacements are machined from ductile iron in different sizes and configurations. They smooth the power output in reciprocating engines, store and deliver energy at higher rates than the source, and control the orientation of a mechanical system using gyroscope and reaction wheel. It's often recommended to replace both the flywheel and clutch at the same time. Order the flywheel designed for your vehicle.

3.0 out of 5 stars ( 2 )

$179.98

Exedy OE Clutch Kits

Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.

4.5 out of 5 stars ( 14 )

$220.80

—

$512.12

South Bend Clutch Stage 3 Endurance Clutch Kits

South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.

5.0 out of 5 stars ( 2 )

$1,201.15

—

$1,548.21

Competition Clutch Stage 3 Clutch Kits

Competition Clutch offers Stage 3 clutch kits for a variety of applications, including many Mazda, Subaru, Toyota, Scion, Geo, Lexus, Pontiac, Mitsubishi, Dodge, Hyundai, Nissan, Infiniti, Ford, Honda©, and Acura© models from 1975 and up. These kits provide up to 150 percent increase in torque capacity. The segmented ceramic material with a performance pressure plate will provide the ultimate grab in street and strip combinations. They provide quick but smooth engagement and extended life. Stage 3 clutch kits include a Competition Clutch performance pressure plate, a high-torque sprung disc with segmented ceramic facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

5.0 out of 5 stars ( 1 )

$575.00

—

$595.00

VEGE Remanufactured Torque Converters

VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.

4.13 out of 5 stars ( 62 )

$148.99

XClutch Stage 1 Clutch Kits

XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.

3.6 out of 5 stars ( 5 )

$542.48

—

$2,233.98

ACT Streetlite Xact Flywheels

ACT Streetlite Xact flywheels are designed to provide significantly improved engine response and acceleration at an affordable price. Order the model designed for your vehicle application. Features: * Lighter and stronger than OE flywheels * Better drivability and durability * Recommended for street use and drag racing * Designed using the latest CAD and Finite Element Analysis software * CNC-machined and dynamically computer-balanced for smooth operation at extremely high rpm * Entire forgings are heat-treated for strength and toughness * Tight tolerances for fit, concentricity, and parallelism * Adequate material behind the friction surface for excellent heat capacity * One-piece construction for reduced failure and uniform, efficient heat transfer—no more warped inserts * Integral ring gears are induction-hardened for longer gear life and weight reduction where it matters most—eliminates gear breakage or separation * Ring gears are cut with lead-in chamfers for better starter engagement and to prevent rounding-off gear teeth * SFI-certified

4.94 out of 5 stars ( 36 )

$368.00

—

$476.00

Competition Clutch Lightweight Flywheels

Competition Clutch steel flywheels are made of 4140 forged steel and are one-piece designs, which helps significantly in reducing the chances of ring gear separation and friction surface warpage. Forged steel flywheels work with all performance and stock clutch assemblies, and can be resurfaced. Competition Clutch lightweight steel flywheels are recommended for naturally aspirated and/or street driven applications. They preserve low-end torque and drivability, and are well suited for Gravity, Stage 1, and Stage 2 clutch applications.

Not Yet Reviewed

$295.00

—

$325.00

Competition Clutch Stage 2 Clutch Kits

Competition Clutch offers Stage 2 clutch kits for a variety of applications, including many Mazda, Subaru, Toyota, Scion, Geo, Lexus, Pontiac, Mitsubishi, Hyundai, Nissan, Infiniti, Ford, Honda©, and Acura© models from 1975 and up. The kits provide up to 80 percent increase in torque capacity and are properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. State 2 clutch kits include a Competition Clutch performance pressure plate, a high-torque sprung disc with anti-burst steel-backed Brass Plus facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

Not Yet Reviewed

$495.00

—

$525.00

ACT Throwout Bearings

ACT throwout bearings are the same high-quality bearings included in your ACT clutch kits. They are available separately for every kit made by Advanced Clutch Technology and are perfect for replacing lost or damaged bearings.

4.27 out of 5 stars ( 11 )

$96.00

XClutch Chromoly Lightweight Flywheels

XClutch chromoly lightweight flywheels are explosion-proof and designed to meet SFI specification 1.1. They come with an integral ring gear and timing sensor ring, if applicable. These flywheels have been engineered to the highest standards—and are available in a range of configurations for various performance street and track applications. Whether it's for a modified street car, dedicated race car, or an off-road 4x4, XClutch flywheels provide the ultimate solution for your specific vehicle. These replacements feature premium quality materials for strength and weight reduction. XClutch lightweight flywheels are the choice for many top motorsport teams and tuners from around the world. Order the model recommended for fitment on your car or truck.

4.0 out of 5 stars ( 1 )

$357.69

Competition Clutch Stock Clutch Kits

Competition Clutch offers stock clutch kits for a variety of applications, including select Mazda, Subaru, Toyota, Lexus, Pontiac, Mitsubishi, Infiniti, Nissan, Honda©, and Acura© models from 1985 and up. These OE-style clutch replacements are the economical solution for cars that are stock or have basic bolt-ons. They provide a stock torque capacity rating and maintain stock pedal feel. Break-In Procedure: After you install your new Competition Clutch, you'll want to make sure that the clutch is properly broken in for ultimate operation. To break in your clutch, shift as often as possible during the first 500 miles, by doing so you'll ensure that the material from the disc is embedded into the friction surfaces of the pressure plate and flywheel. Following the break-in procedure will deliver the longest possible clutch lifespan.

Not Yet Reviewed

$450.00

Clearance

WIX Filters Oil Filters

WIX oil filters play a vital role in in your vehicle's lubrication system, protecting your engine from premature wear. As gearheads know, every moving part in the engine requires clean oil! WIX oil filters trap more dirt than the leading national brand, and they keep filtering long after the competition has completely quit. WIX patented the first spin-on oil filter in 1954 and has been at the forefront of filter technology ever since. Canister-style oil filters feature strong, full-metal base plates to prevent leaks at the double seam under severe driving conditions. They also offer glass-enhanced media that improve each filter's ability to catch and hold engine-damaging dirt. Choose the WIX oil filter to fit your make and model—for a cleaner-running engine over many extra miles.

4.84 out of 5 stars ( 394 )

$9.99

Clearance

WIX Filters Transmission Filters

WIX transmission filters protect automatic transmissions against contaminants in the transmission fluid. Proper filtration helps improve transmission life by minimizing wear and preventing sticking and scoring of sensitive shift control valves. In the event of a part failure, WIX transmission filters also guard against secondary damage to other parts, possibly minimizing additional repair costs. Order the replacement model designed for fitment with your vehicle application.

4.46 out of 5 stars ( 122 )

$7.99

ATP Automatic Transmission Inline Filter Kits

ATP automatic transmission inline filter kits will keep your transmission fluid clean. Foreign particles can cause premature transmission wear. These quality inline filters will do the job and are easy to install. Kits include hoses, clamps, and instructions. Sift out the bad and keep your transmission happy with inline filters from ATP.

4.25 out of 5 stars ( 12 )

$27.99

—

$28.99

LuK Clutch Kits

Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.

4.42 out of 5 stars ( 384 )

$216.99

—

$779.99

FAG USA Clutch Release Bearings

FAG USA develops and produces high-quality release bearings, roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications. Their clutch release bearings (throwout bearings) are made from high-quality materials to the correct specs, continuing to help your vehicle's engine disengage from the wheels when you depress the clutch pedal. Available to fit a wide range of vehicles, choose the one designed for your vehicle to restore proper clutch operation.

Not Yet Reviewed

$60.99

ACT Mod-Twin 225 Heavy-Duty Twin-Disc Street Clutch Kits

ACT Mod-Twin 225 heavy-duty twin-disc street clutch kits are designed to tackle aggressive launches and rapid shifting of high powered AWD's—by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a more consistent light pedal feel. The puck-style friction plates, with high-quality organic materials, deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. Clutch kits are available in different styles and other options for fitment on countless vehicles from the early 2000s and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style organic friction plates * Available with sprung or unsprung mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.

Not Yet Reviewed

$1,984.00

—

$2,104.00

ACT Mod-Twin 225 Extreme Twin-Disc Race Clutch Kits

ACT Mod-Twin 225 Extreme twin-disc race clutch kits will provide aggressive launches and rapid shifting of high powered AWD's--by combining twice the ceramic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a consistent light pedal feel. The puck-style friction plates with high-quality ceramic materials deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design of these clutch kits allows for quicker shifts and lasting trouble-free service. Different styles and other options are available for vehicle fitment from 2003 and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style ceramic friction plates * Available with sprung or rigid mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.

Not Yet Reviewed

$2,095.00

ACT Prolite Xact Flywheels

ACT Prolite Xact flywheels provide a quicker throttle response and improved acceleration. They're CAD-designed, CNC-machined, and computer-balanced for quality and precision. The manufacturing process includes chromoly forgings with induction-hardened integral ring gears for maximum life. Prolite Xact flywheels are stronger and more durable than billet steel, aluminum, or cast iron! Dozens of models are available—order the one designed for your vehicle. More product features include: * Smooth operation at all RPMs * Optimal mass distribution * Lead-in chamfers * Heat-treated and tempered

4.71 out of 5 stars ( 42 )

$399.00

—

$509.00

ACT Roller Pilot Bearings

When you're installing a new clutch, these ACT pilot bearings are made to obtain less friction and longer life out of your clutch assembly. These high-quality roller bearings are available for a variety of popular applications.

5.0 out of 5 stars ( 3 )

$7.00

Zoom MU Series Clutches

Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation

4.43 out of 5 stars ( 172 )

$154.99

Sachs Stock Replacement Flywheels

Replace your worn-out or malfunctioning flywheel with one of Sachs Stock Replacement flywheels. These quality components are built to OEM specifications to offer the same fit, form, and function as the factory part, which means a safer, more comfortable, and contemporary drive. All Sachs Stock Replacement flywheels are designed to provide superior performance and dependability to help restore your vehicle back to its proper operation. Choose the replacement flywheel designed to fit your application needs.

3.0 out of 5 stars ( 2 )

$100.99