Availability
Showing In Stock Items. Show All 70 Items.
Summit Bucks
Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.
( 11 )
$244.22
Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability. Available for a variety of passenger cars, trucks, and SUVs, these Timken wheel bearings will get you back on the road in no time.
( 260 )
$42.99
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 51 )
$118.99
Dorman CV joint boots protect your CV joints from destructive dirt and moisture. A common cause of CV joint failure is cracks in the CV boot. When the boot is cracked, it allows dirt and grit to mix in with the grease and wear down the parts of the joint. CV boots should be replaced as soon as cracking is visible in their rubber folds. Pick up one of these Dorman CV joint boots to eliminate the problem.
( 5 )
$21.99
—
$31.99
Summit Bucks
Clutch master cylinders are vital components of manual transmission systems, controlling hydraulic pressure to engage and disengage the clutch. Exedy clutch master cylinders are quality OE replacements to restore optimal shifting and prevent clutch slippage or even a loss of power. Exedy offers many choices covering an array of vehicles. Choose the clutch master cylinder designed for your vehicle.
( 4 )
$40.83
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$596.74
Dorman wheel hubs are built with an industry-leading evaluation process that ensures their hubs are designed for long-lasting reliability and performance. Plus their vehicle try-on testing ensures a proper fit, every time. They feature sturdy steel construction. Bearings press onto the hubs for ease of installation. Wheel hubs are an integral component of your wheel assembly, crucial to establishing the handling characteristics of your vehicle. Trust Dorman hubs to deliver the best performance.
( 6 )
$46.95
—
$67.95
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 318 )
$530.95
USA Standard manual transmission bearing kits include top-quality components to rebuild the bearings in your transmission. They're great for replacing worn out or broken items--even just giving your transmission a quick update, while you're down in the off-season.
( 9 )
$409.99
Replace your worn-out or malfunctioning flywheel with one of Sachs Stock Replacement flywheels. These quality components are built to OEM specifications to offer the same fit, form, and function as the factory part, which means a safer, more comfortable, and contemporary drive. All Sachs Stock Replacement flywheels are designed to provide superior performance and dependability to help restore your vehicle back to its proper operation. Choose the replacement flywheel designed to fit your application needs.
( 1 )
$100.99
Are you looking for a replacement slave cylinder for your clutch? Dorman has you covered with their OEM Dorman clutch slave cylinders. Dorman clutch slave cylinders deliver increased performance and reliability. Dorman has industry-leading slave cylinder application coverage that is second to none. If you want your clutch working at optimum levels, then you need one of these Dorman clutch slave cylinders.
( 72 )
$37.99
TransGo automatic transmission rebuild components are engineered for performance and designed for durability. These kits address nearly every gearbox problem possible through quality that only a legend in the transmission repair industry can provide. Shift that clunky machine into reliability mode with TransGo automatic transmission rebuild components. Order the kit designed to fit your specific model.
( 11 )
$38.57
Flexplates are important connections between your engine and torque converter, and are relatively inexpensive parts to change out when they demonstrate signs of wear. These one- or 2-piece Pioneer replacement flexplates are machined from durable steel for long-lasting performance. They're available in a wide variety of configurations for fitment with engine and transmission applications spanning six decades.
( 72 )
$45.99
Raybestos R-Line wheel hub assemblies are designed to OE specifications—and tested for endurance, temperature control, hydraulic and salt resistance, as well as metallurgical integrity and vibration. This ensures Raybestos R-Line assemblies deliver a long service life with consistent performance that's quiet and safe. Order the model designed for fitment on your vehicle application.
( 20 )
$33.99
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 85 )
$79.99
These Dorman driveshaft center support bearings are made of a high-quality black rubber material. Dorman has been producing high-quality replacement parts since 1918 with state-of-the-art equipment. Dorman has you covered for all your driveshaft center support bearing needs.
( 19 )
$83.99
Replace your worn-out clutch master cylinder with affordable Sachs Stock Replacement parts. The clutch master cylinder, or clutch pump, is the main type of hydraulic clutch operating system. This simple hydraulic principle is used to transmit the required force from the clutch pedal to the slave cylinder. As part of the clutch system, this part is connected on one side to the clutch pedal via a lever mechanism. The other end is connected via a hose to the slave cylinder, which moves the clutch. These vital components allow the driver to manipulate the clutch pedal correctly, always with less effort than would be needed if this part were not present in the vehicle. Sachs clutch master cylinders are built to OEM specifications to offer the same fit, form, and function as the factory OE part to help you restore your vehicle back to its proper operation. Select the Sachs Stock Replacement clutch master cylinder for your application.
( 1 )
$68.99
Beck/Arnley clutch slave cylinders are designed to deliver increased performance and reliability. They will help to make sure that your clutch is working at optimum levels and maintaining excellent drivability. Beck/Arnley clutch slave cylinders are available for passenger cars and light trucks, so we are sure to have your application covered.
( 11 )
$44.99
These National Bearing wheel bearings are designed for use with your OEM or aftermarket brake rotors. Their steel roller bearing configuration allows for maximum performance without sacrificing durability.
( 24 )
$32.99
—
$52.99
Replace your worn-out clutch slave cylinder with affordable Sachs Stock Replacement parts. These components are built to OEM specifications to offer the same fit, form, and function as the factory component. The clutch actuation system for cars transfers the pressure of the driver's foot on the pedal to the clutch. As result, this ensures absolute reliability, meet ergonomic requirements, and provides a high level of comfort throughout its entire service life. The actuation system includes the hydraulic transmission path with master and slave cylinder, as well as the mechanical part with the clutch release bearing and the lever. All Sachs clutch slave cylinder components are designed to provide superior transmission shifting and dependability to help you restore your vehicle back to its proper operation. Select the model for your application needs.
( 2 )
$34.99
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 5 )
$724.40
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$852.05
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$915.88
FAG USA wheel bearing and hub assemblies are compact, lightweight, maintenance-free hubs. They combine the cost-effectiveness and proven performance characteristics of other bearings with the convenience of an integral mounting flange for mounting brake, disc, and wheel. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearing and hub assemblies, available for hundreds of applications.
( 11 )
$169.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
