Availability
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 55 )
$2,085.95
—
$3,478.95
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 151 )
$1,772.95
—
$3,375.95
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$1,873.95
—
$3,830.95
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 30 )
$1,596.99
—
$2,490.95
Whether you need stock, stamped, or heavy-duty, TCI forged flexplates are your performance solution. TCI offers popular Chrysler, Ford, and Chevy applications. Their forged selection for Chrysler includes special counterbalanced flexplates for neutral balance torque converters in cast crank applications that came with a counterbalanced torque converter. For Ford applications, TCI offers OEM-style small block plates built to precise standards with extra-thick welds to retain starter ring gear, and they are precision-balanced. Their Chevy stamped flexplates are built thicker than stock from high-tensile strength materials with extra welding to help retain the starter ring gear, and to withstand the stress of high-rpm engines and high-stall converters. For high performance, buzzing around at high rpm requires the confidence of TCI forged flexplates.
( 268 )
$67.95
—
$228.95
For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.
( 3 )
$2,349.95
—
$2,885.95
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$2,802.95
—
$4,293.95
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$164.95
—
$500.95
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 186 )
$40.95
—
$92.95
TCI trans-brake kits allow you to achieve maximum torque converter stall for quicker and more consistent reaction and 60 ft. times. They work like this: When the trans-brake is engaged, the vehicle can roll neither forward nor backward, and as you press on the accelerator, the engine can rev as high as the torque converter stall. Once the brake is released, power is immediately transferred to the rear tires, with less parts breakage than with a manual transmission.
( 21 )
$559.95
—
$1,127.95
Whether you drive a sand dragger, hill climber, or tractor puller, TCI has the transmission for you. The competition line of full manual 4x4 transmissions is built following the same specifications TCI uses in building thousands of drag race units. Applications are also available with trans-brake valve bodies.
( 1 )
$2,297.95
These TCI automatic transmission bellhousings are designed to replace your OEM bellhousing. Automatic transmission bellhousings are not SFI-approved for any type of racing.
( 10 )
$424.95
Maximize your transmission's power potential! TCI sprag and drum assemblies are designed to reduce rotating mass without compromising drum integrity. They will hold up to five clutches and are hard coated for improved wear characteristics.
( 6 )
$517.95
—
$548.95
Get maximum performance and quicker ETs with these TCI full manual valve bodies. They're engineered to allow full manual control of the valve body, for quicker shift timing and higher line pressures. You get less clutch slippage under high load, so that more power gets to the ground. They're a great choice for bracket cars, monster trucks, and virtually any off-road competition vehicle where a transbrake is either illegal or undesirable.
( 59 )
$302.95
—
$338.95
No matter what transmission you have, there are a lot of different parts that are required to make it work. TCI has you covered with these racing transmission filter and pan gasket kits. They will provide more flow with superior particle filtering, to extend the life of your transmission.
( 100 )
$29.95
—
$37.95
These TCI transmission Master Racing overhaul kits are designed for racers who maintain their own transmissions. They contain parts that are required when freshening up an existing competition transmission. You'll receive the high performance filter, clutches, steels, seals, gaskets, and bushings normally replaced during a rebuild. In addition, kits for late model GM overdrive transmissions also include a new performance band.
( 58 )
$197.95
—
$405.95
TCI Pro Super transmission overhaul kits contain the same parts and pieces used in building TCI Streetfighters. You will receive components normally replaced on a transmission rebuild, along with new performance frictions and steels, plus a Trans-Scat valve body kit, which enables you to change the valve body to a manual/automatic setup that delivers both a good solid shift suitable for towing applications and a competition-quality shift for drag racing. Features: * Seals, gaskets, and bushings * High performance frictions and steels * Reusable-type pan gasket * Adjustable modulator * High-volume filter * Drain plug kit * Trans-Scat valve body kit * Performance band included in 700R4, 4L60E, and 2004R kits as they normally require a band during regular repair cycles
( 87 )
$348.95
—
$398.95
TCI Premium Series flexplates are designed to be upgraded replacements for factory units. Precision manufactured and featuring a premium e-coat finish that resists corrosion from salt and road grime, they are durable and longer lasting options than commonly available budget flexplates. TCI Premium Series flexplates are spin balanced to ensure vibration-free operation and to meet factory balance specifications for both internally and externally balanced engines. They are the perfect replacement for any stock to mild performance vehicle.
( 9 )
$59.95
—
$107.95
Don't go to the junkyard looking for that replacement transmission yoke for your performance application--TCI has you covered. Since your application may not match with manufacturer specifications, TCI can supply you with a matching yoke without any hassles.
( 14 )
$212.95
TCI steel transmission pans are the perfect replacement for performance and appearance beneath your vehicle. These steel reservoirs are thicker than stock for longevity, and some models are beautifully chrome plated to further prevent rust—in addition to including a drain plug to facilitate fluid maintenance. Over time, many transmission pans develop a warped, leaky gasket flange, or become damaged by road debris. Protect your transmission by bolting on one of these economical replacement upgrades from TCI.
( 67 )
$57.95
—
$88.95
TCI's StreetFighter valve bodies give you better control over your transmission, while improving your car's overall performance. They'll give you the option of either full manual or full automatic control, meaning you can put it in drive and allow the transmission to shift automatically, or shift it yourself manually at any rpm you desire. Great for street and racing use, they come ready for installation and are the same valve bodies installed by TCI in their famous StreetFighter series transmissions.
( 8 )
$350.95
—
$455.95
For serious performance, TCI machined SFI-approved flexplates are a "must have". These .140 in. thick flexplates are constructed of A514 Blanchard ground steel and are SFI 29.1 approved. TCI offers a complete line of Chrysler and Ford flexplates with GM and Ford bolt patterns for use with their adapter plate kits as well as neutral balanced flexplates with 168-tooth and 166-tooth starter rings for Chevy and Pontiac applications. Now you can speed down the track with the confidence of TCI machined SFI-approved flexplates.
( 58 )
$286.95
—
$393.95
TCI high-performance intermediate sprags feature more elements than stock, to provide better holding power. They are available for a variety of applications to suit your needs.
( 2 )
$127.95
Vacuum modulators are designed to tell your transmission what kind of load is being put on it and react with the proper line pressures and shift points. Over time, these modulators can develop leaks or get damaged, causing driving issues and even premature transmission failure. TCI solves this dilemma with these adjustable modulators. Not only do these modulators renew performance, but you will also have the ability to slightly raise/lower part throttle shift points and line pressures. Simply adjust the screw inside of the vacuum nipple for more or less diaphragm preload.
( 7 )
$35.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
