Availability
Showing In Stock Items. Show All 17 Items.
How can you take the guess work out of the hardest part of rebuilding your bearing assemblies? Van Steel loaded bearing supports allow you to rebuild your trailing arms without purchasing a bearing setup tool. Available in left hand and right hand versions, these reproductions of the originals contain Timken bearings, SKF seals, and a new dust shield, plus the spacer and shim are set to Van Steel specs. Reduce your rebuild time and utilize Van Steel's bearing specs with their loaded bearing supports.
( 2 )
$241.99
The Right Stuff axle bearings are made from top-quality materials to original specs, so you can be sure that you are getting a quality product. They are available for a variety of axle models, so they're sure to have your vehicle covered. Don't take a chance on used bearings--replace the old ones with a set of The Right Stuff axle bearings.
( 13 )
$132.99
Motive Gear offers axle bearing and seal kits for a variety of applications—including Dana 60, Chrysler 9.25 in., Ford 8.8 in., and Ford 9.75 in. differential case design types. These replacements are manufactured from factory-grade materials and machined to OE specs to ensure proper fit and long-lasting performance. Maintain your drivetrain with components from an industry leader whose products are found in the winner's circle at racing events worldwide.
( 1 )
$157.99
Yukon Gear & Axle axle bearings are made from top-quality materials to original specs, so you can be sure that you're getting a quality product. These replacements are available for a variety of axle model applications, from the 1950s and up.
( 69 )
$108.99
—
$209.99
Motive Gear drum brake wheel hubs provide a direct-fit to replace worn hubs. Manufactured from billet steel, they are built to OE specs, providing reliable, long-lasting service, and an easier install.
( 1 )
$242.99
LEED Brakes offers wheel hubs for a variety of applications, including many classic Ford Broncos from the 1960s and '70s. These forged steel drum brake wheel hubs are built to outlast and outperform the factory cast iron hubs. The heavy-duty replacements will enable you to conquer the toughest trails and most demanding off-road adventures with confidence. Strengthen your Bronco's spirit—order the hubs recommended for your truck. Additional notes: * Unmatched strength: Forged steel construction delivers superior durability compared to the weaker cast iron hub * Built for adventure: Tackle any terrain with the peace of mind knowing your hub can handle it * Perfect fit: Seamless compatibility with your factory drum brakes or LEED Brakes front disc brake conversion kits * Upgrade with ease: Simple installation gets you back on the road quickly
Not Yet Reviewed
$249.99
DRP Performance offers premium low drag bearing kits for a wide range of applications, including many Ford, Chevy, and Pontiac cars from the 1960s, '70s, '80s, and '90s. Low drag hub components reduce friction and lower temperatures, making your wheels spin easier, delivering more horsepower to the track—all while reducing maintenance and making your race car faster. Enhance your performance on oval track asphalt, oval track dirt, drag racing, road racing, and street applications. Kits include a DPR bearing spacer, DRP Premium Super finished Bearing Kit, and DRP Ultra low drag seal. Here are details on each component: * DRP Bearing Spacer: A difference you can feel—in the pits and on the track. Bearing spacers make the most difference of any low drag hub upgrade. Properly installed, these spacers will provide an immediate increase in hub free spin, an improvement large enough to feel just by pushing the car around. And the benefit doesn't stop there. Bearing spacers make the most difference when a side load (cornering force) is applied. Drivers have commented on how much faster a car with bearing spacers free rolls when entering and through the center of the corner. Bearing spacers simplify and reduce hub maintenance. Spindle nut torque is no longer sensitive. In fact, with spacers installed, you can tighten the spindle nut as much as you want without overtightening the bearings. (DPR recommends 20-40 lbs.-ft.) Bearings will run cooler and do not need to be repacked as often. Bearing spacers are simple to install. DRP bearing spacers have a threaded adjustment, allowing the user to quickly set bearing end play or preload. A set-screw locks the spacer at the desired adjustment. Once installed, they do not need to be readjusted unless you replace the hub or bearings. Bearing spacers are used in virtually every application in professional motorsports. * DRP Premium Super finished Bearing Kit: Reduce bearing temperature by over 100 degrees F verses stock bearings! Increase free spin by over 250 percent! DPR starts with premium quality bearings and puts them through a super finishing process. This process removes the grind marks and greatly smooths the surface of the bearing roller, while leaving a "hatch" pattern to retain grease. Quality wheel bearings will last the life of most racing applications. * DRP Ultra Low Drag Seal: …billet aluminum, full PTFE sealing lip, reusable, great for any application: dirt, asphalt, road race, street Decrease seal drag by over 1,000 percent! Air gap seals create an "air curtain" to keep debris out and eliminate drag completely! DRP Ultra Low Drag hub seals are true, purpose-built, high performance seals. The housing is made from lightweight aluminum. The sealing element is a special PTFE blend, giving it natural low friction qualities. Seals are reusable. Order the kit recommended for your vehicle.
Not Yet Reviewed
$165.85
Get rolling with OMIX-ADA wheel bearings. They offer a selection of bearings to fit several applications, and all provide the right fit and function to keep your rig moving smoothly. When your wheel bearings need replacement, choose OMIX-ADA for your Jeep.
Not Yet Reviewed
$129.99
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$128.99
Yukon Gear & Axle drive flange caps are designed to keep your axle sealed up and free from dirt, dust, or other debris that could cause harmful damage. They are manufactured from billet aluminum and bolt in place with countersunk Allen head bolts, sold separately. Order the caps designed to fit your axle application.
Not Yet Reviewed
$120.99
—
$148.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
