Availability
Trail-Gear unit hubs are not just another aftermarket 1-ton unit hub that's been machined down and modified from an 8-lug to a 6-lug application. No, Trail-Gear designed these units for a specific application, so the hubs will bolt right onto Dana 60 or 9 in. housings that are set up for unit hubs. They're made to accommodate a 30- or a 35-spline axle shaft and use a 1/2 in.-20 threaded wheel stud with a 6 x 5.5 in. wheel bolt pattern. These are the same unit hubs that you will see on most competition buggies. They are ultra-strong and easy to replace. Simply unbolt the old one and bolt on the new replacement hub. This is a much simpler and stronger unit then the stock spindles being replaced. All unit hubs include integrated roll pin to prevent the spindle nut from coming loose.
( 1 )
$549.99
Built ground up for Ultra4 rock racers, Spidertrax Off-Road Ultimate unit hub assemblies are truly the reinvention of the unit bearing itself. Genuine Timken bearings, full chromoly heat-treated construction, and a fully integrated drive slug makes the Ultimate unit bearing the only racing unit bearing of its kind—the last bearing you'll ever need. They use 5/8 in.-18 studs on a 5-on-5 1/2 bolt circle, designed specifically for Spidertrax 40 splined axle shafts. Drive cover sold separately. * Compact: With a span of just 2.125 in. from flange to wheel mount, the Spidertrax Ultimate unit bearing is the perfect fit for an Ultra4 solid or IFS (independent front suspension) axle. * Powerful: Spidertrax eliminated the need for a drive slug, packed in 40 splined axle splines, all while adding a 4.235 in. hub register for wheel centering and strength. * Secure: Spindle nuts are not only thread-locked into place, Spidertrax also uses a keyed lock ring. This means never having to worry about loosening spindle nuts.
Not Yet Reviewed
$799.00
Make your pit crew, and back, happy with the Spidertrax Drive Snout. Designed to bolt-on to Spidertrax Ultimate unit bearings, these parts allow for easier tire changes by giving that wheel and tire a place to rest during install. They're perfect for go-fast racing events where the speed of a tire change matters. The Drive Snout is designed for 6- and 8-lug applications. Drive cover sold separately.
Not Yet Reviewed
$89.00
Clearance
Replace your worn or damaged hub assemblies, reduce friction, and improve fuel economy with Wheel Bearings unitized hub assemblies. Wheel Bearings Inc. uses the highest quality components to assemble each hub unit. Each wheel hub assembly that Wheel Bearings Inc. produces is thoroughly tested to ensure the highest quality possible. All Wheel Bearing Inc. hub units are proudly made to ISO 9001:2000 standards. If you need a premium hub unit without paying a premium price, then Wheel Bearings Inc. has your problems solved.
Not Yet Reviewed
$55.99
$19.50
—
$60.99
Clearance
BCA Bearing by NTN wheel bearing and hub assemblies are premium OE-quality units with application-specific design and engineering for reduced noise, vibration, and harshness, as well as extended life. BCA Bearing by NTN wheel bearing and hub assemblies will include one of their superior Gen 1, Gen 2, and Gen 3 hubs—high-quality wheel end replacement parts for domestic and import vehicles.
( 10 )
$370.99
$28.50
—
$430.99
Clearance
Yukon Gear & Axle offers front and rear hub replacements for a variety of vehicles and axle applications, from 1955 and up. These steel units are available in different styles and finishes. Order the model recommended for your upgrade.
( 1 )
$163.99
—
$540.99
$107.50
—
$459.84
Timken Bearing wheel bearing and hub assemblies are the key to restoring your vehicle's smooth and safe ride. They're made to meet or exceed OEM specifications and are available for a variety of domestic and import vehicles. ABS sensors are included where necessary. Order the replacement model needed for your application.
( 236 )
$77.99
—
$472.99
On Sale
Yukon Gear and Axle wheel bearing and hub assemblies are top-quality replacement components designed to improve safety and reduce friction from wear for front and rear applications. Save your time and money while enhancing your ride's performance with Yukon Gear & Axle wheel bearing and hub assemblies. Order the assembly designed to fit your application.
( 1 )
$185.99
—
$389.99
$158.09
—
$331.49
Summit Bucks
ACDelco Gold wheel bearing and hub assemblies are the high-quality alternative to original equipment parts. These unitized wheel bearings contain dual ball or tapered roller bearing elements sealed with a lifetime lubrication. ACDelco Gold replacement parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. The assemblies are available in dozens of options for fitment on countless vehicles from the 1970s and up.
( 5 )
$28.99
—
$467.99
Van Steel offers X-Tracker wheel bearing and hub assemblies for a variety of vehicles—including Chevrolet Corvette applications from 2010 and up. These replacement units are manufactured to precision specifications using premium heat-treated high-carbon steel for superior strength and problem-free performance. Order the front or rear model recommended for your vehicle.
Not Yet Reviewed
$399.99
—
$409.99
Dorman pre-pressed wheel hub assemblies are time-saving and cost-efficient solutions for complete hub assembly repairs. Dorman OE FIX offers one pre-assembled unit, consolidating all four components and ready for installation right out of the box—significantly cutting labor time. The dealer repair option is to purchase components separately, requiring a specialized shop press and/or labor-intensive assembly prior to installation. Dorman OE FIX is the better option. Order the model designed for your vehicle application. Dorman pre-pressed wheel hub assemblies feature: * No special shop press tool required during installation, saving one to two hours of labor * Component pieces are factory manufactured and assembled under rigorous quality control measures, delivering higher consistency to meet or exceed the application needs * Cost-savings advantage to purchasing components separately * Constructed from quality materials for high performance and durability
( 37 )
$40.99
—
$546.99
What's better than Trail-Gear Rock Assault 9 axle housings? Rock Assault 9 with Trail-Gear's true, full-float, 35-spline axle shafts! These shafts are manufactured from heat-treated 4340 chromoly and feature a tapered design that allows for more yield during extra torque load, letting them flex without breaking. Of course, the Rock Assault 9 axle housings are complete welded assemblies from flange to flange, including the unit bearing pockets and inner housing seals. And now, these strong axle housing include the strength of their axle shafts, making it even easier to upgrade your build. Get ready to rock on with Rock Assault 9 axle housings with shafts.
( 1 )
$69.99
Auto Metal Direct front wheel bearing caps finish your classic's wheels with original style. These AMD stamped steel caps are exact reproductions of the factory original "button-style" units. They are zinc plated. Little details matter; restore you classic's appeal with Auto Metal Direct front wheel bearing caps.
( 14 )
$13.99
—
$18.99
Reduce driveline drag with JR Race Car ultra free running bearings. These free-spinning units will help reduce drag and free-up horsepower. Get rolling with JR Race Car ultra free running bearings for the most power possible.
Not Yet Reviewed
$17.14
Clearance
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$110.99
$3.99
—
$453.99
On Sale
Rear outer wheel bearings are extremely important for keeping the axle centered and transferring torque—but it's the retaining rings that keep everything in place, allowing it to work. Crown Automotive axle shaft bearing retaining rings are a perfect replacement when changing bearings. These units are designed and built to OE specs for excellent fit and reliable performance. Crown Automotive retaining rings help keep bearings under control and spinning down the road.
( 1 )
$10.99
—
$13.99
$9.89
—
$12.59
On Sale
That strange noise you hear when cornering or making sharp turns may be a telltale symptom of worn-out bearings. Crown Automotive wheel bearing and hub assemblies allow you to repair these crucial safety and handling components with quality replacement units. Return to the handling and performance you expected when the vehicle rolled off the factory line. These assemblies are available in numerous variations for fitment on a wide variety of makes and models.
( 4 )
$46.99
—
$206.99
$42.29
—
$186.29
Clearance
Raybestos offers PG Plus Professional Grade wheel hub repair kits for the three-generation wheel hub assembly units: Gen 1, Gen 2, and Gen 3. Each unit is designed to OE specifications and is tested for endurance, temperature control, hydraulic/salt resistance, metallurgical integrity, and vibration. This helps to ensure that the Raybestos hub assemblies deliver an extended service life with quiet, safe, and consistent performance. Generation 1 units are double-row contact ball bearings with a split inner ring that allows each ball bearing to rotate independently. They do not include a hub, which must be purchased separately. Gen 1 features and benefits include: * Tapered or ball design * Double-row bearing with angular bearing contact for axial stability * Pre-lubricated with an integral lifetime seal * Maintenance-free * Maximized bearing life * No preloading required * Compact size Generation 2 is Raybestos' middle step in hub development. They feature a flange that mounts directly to the brake and wheel mount—eliminating the need to purchase a separate hub. Gen 2 features and benefits include: * Flange for wheel and brake rotor attachment * Tapered or ball design * Double-row bearing with angular bearing contact for axial stability * Pre-lubricated with an integral lifetime seal * Integral AVS sensor included with some applications * Simplified installation * Requires no adjustment * Maintenance-free * Maximized bearing life * No preloading required * Compact size Generation 3 assemblies are complete wheel hubs and Raybestos' most advanced offerings. Generation 3 differs from Generation 2 by adding a second flange that fixes the hub assembly to the suspension. Gen 3 features and benefits include: * Two flanges—one for wheel and brake rotor attachment * One for fixing the unit to the suspension * Integral AVS sensor is included with most applications * Tapered or ball design * Double-row bearing with angular bearing contact for axial stability * Pre-lubricated with an integral lifetime seal * Simplified installation * Requires no adjustment * Maintenance-free * Maximized bearing life * No preloading required * Compact size
Not Yet Reviewed
$23.99
$14.50
On Sale
An upgrade that gets you more mileage per gallon and hubs that are easier to service, Yukon Gear & Axle spin free locking hub conversion kits are an enhancement anyone would want on their 4WD vehicle. Whether you service your vehicle yourself or you have a trusted mechanic, you don't usually like to keep difficult or expensive-to-fix things on your ride. These kits are not only easier to service, they help reduce wear and tear on your drivetrain components. They allow your front axle and drivetrain to disengage when in 2WD, preventing premature wear and improving fuel economy. Yukon Gear & Axle kits are available for various makes and models from the 1980s and up. Features include: * Reduced drag, resulting in greater fuel economy * Replaces vulnerable and expensive factory unit bearing * Kit includes heavy-duty 4340 chrome-moly outer axles * Premium hubs allow driver selectability * Complete kits contain all necessary components
( 11 )
$3,389.99
$2,881.49
RESTOPARTS® Supplied wheel dust caps finish your classic's wheels with the original style. These stamped steel caps are exact reproductions of the factory units and zinc plated for lasting protection. Little details matter; restore your classic's original appeal with RESTOPARTS® Supplied wheel dust caps.
Not Yet Reviewed
$16.99
Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability. Available for a variety of passenger cars, trucks, and SUVs, these Timken wheel bearings will get you back on the road in no time.
( 262 )
$10.99
—
$108.99
On Sale
Yukon Gear & Axle axle bearings are made from top-quality materials to original specs, so you can be sure that you're getting a quality product. These replacements are available for a variety of axle model applications, from the 1950s and up.
( 74 )
$366.89
$20.39
—
$311.86
Summit Bucks
ACDelco GM Genuine Parts wheel bearing and hub assemblies support the vehicle while allowing the wheel to rotate. They are a GM recommended replacement for your vehicle's original component. These GM Genuine Parts wheel bearing and hub assemblies have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 14 )
$78.99
—
$877.99
Mevotech offers TTX wheel bearing and hub assemblies for a wide range of applications, from the 1990s and up. TTX parts are engineered with cutting-edge technology to be the strongest, most durable parts on the market. Built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks, these hub bearing assemblies deliver extreme performance. Plus, their innovative Labor Saver designs and hardware make installations faster and easier. TXX components excel in the most demanding operating environments. Order the assemblies recommended for your vehicle. Additional details: * ENGINEERED INTERNALS FOR OPTIMUM PERFORMANCE: Precision-engineered higher grade rolling elements and optimized geometry to minimize rolling resistance and maximize load distribution. * ENHANCED SEAL FOR CONTAMINANT PROTECTION: Low-friction, heavy-duty Advanced Quantum Sealing System with a multi-lip profile that provides layers of defense to keep contaminants out and vital grease in. * PRE-FILLED WITH EXCLUSIVE LUBRICATING TECHNOLOGY: NanoCeramic lubricant withstands extreme temperatures, resists corrosion, and retains viscosity; particles act as microscopic bearings to reduce friction. * ZERO-FAULT WHEEL SPEED SIGNAL: A molded, abrasion-resistant cord guards against perforation and contaminants at the sensor and plug ends to ensure a faultless signal for ABS and vehicle safety systems. * QUICK AND EASY INSTALLATION: Make your installation faster and easier with fastening hardware and torque specifications right in the box. * CORROSION PROTECTION: Repel-TEK anti-corrosion coating is applied to every surface, including studs and hardware, to prevent buildup and contaminant intrusion for a longer part life. * INCREASED PART DURABILITY: Designed with roll forming to lock internal components for a set preload right out of the box; increased assembly stiffness reduces vibration and improves part life.
( 6 )
$48.99
—
$324.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
