Availability
Showing In Stock Items. Show All 113 Items.
Easily removable Stage 8 locking axle/flange bolt kits help protect your investment. The high-intensity, extreme terrain, and harsh conditions that off-road vehicles experience can cause bolts to loosen—and that's a major safety issue! With stainless steel locking retainers that add strength and snap rings providing superior dependability, Stage 8 locking axle/flange bolt kits are the world's standard for performance lockdown technology!
Not Yet Reviewed
$91.04
Crown Automotive axle hub bolts are direct OE replacements made to strict quality-control standards. They're machined from steel and zinc plated to resist rust and corrosion. These wheel hub fasteners are designed to fit either the driver or passenger side on select Jeeps. Order the bolts recommended for your particular application.
( 2 )
$6.99
aFe Control introduces the PFADT Series upright bolt kits. These replacement fasteners are provided to complete the installation of your PFADT SKF Performance wheel bearings. The torque-to-yield bolts contain a factory-applied chemical locking system—and they must be replaced when changing your wheel bearings. Order the kit recommended for your application.
( 1 )
$44.00
Spidertrax Off-Road steering knuckle bolt kits come with one 7/8 in. diameter Spider Bolt and one Type C hex nut—perfect if you're looking to replace just a single bolt on an Ultimate Knuckle (USK/CSK models).
Not Yet Reviewed
$52.00
Ford Performance Parts replacement IRS Mustang Cobra hubs are direct replacements for your late model Cobra. They feature the stock 5 x 4.5 in. bolt circle and use a 2.775 in. wheel pilot hub to fit today's most popular Mustang wheels. Original equipment on a 1999-2004 Ford Mustang Cobra, these Ford Performance Parts replacement IRS Mustang Cobra hubs will keep your rear wheels operating smoothly.
( 11 )
$225.99
Trail-Gear unit hubs are not just another aftermarket 1-ton unit hub that's been machined down and modified from an 8-lug to a 6-lug application. No, Trail-Gear designed these units for a specific application, so the hubs will bolt right onto Dana 60 or 9 in. housings that are set up for unit hubs. They're made to accommodate a 30- or a 35-spline axle shaft and use a 1/2 in.-20 threaded wheel stud with a 6 x 5.5 in. wheel bolt pattern. These are the same unit hubs that you will see on most competition buggies. They are ultra-strong and easy to replace. Simply unbolt the old one and bolt on the new replacement hub. This is a much simpler and stronger unit then the stock spindles being replaced. All unit hubs include integrated roll pin to prevent the spindle nut from coming loose.
( 1 )
$549.99
Are your hubs weight hogs? Try lightweight Summit Racing™ Circle Track wheel hubs on your Grand National. Weighing in at 11 lbs., these black powdercoated wheel hubs save some pounds on your car's rear-end, and lighter is always better in racing. Summit Racing™ steel rear hub assemblies come complete with steel drive plates, bearings, seals, O-rings, rotor bolts, and steel lug nuts. Plus, they include red anodized dust caps etched with our logo! Lose some weight in your wheel assembly with Circle Track wheels hubs from Summit Racing™--a win-win for you and your car.
( 4 )
$634.99
With Raybestos R-Line axle hubs, you can be assured that there are no significant differences from the original design. Offering a full line of coverage from the 1970s and up, along with great value, R-Line replacement hubs are tested to ensure and maintain safe and reliable service. Veering from the original design can cause problems. Raybestos steel axle hubs deliver proper fit and performance that makes your install hassle-free and provides peace of mind. Order the model designed for your vehicle.
( 6 )
$84.99
—
$130.99
Clearance
URO Parts spindle clamping nuts replace broken or rusted spindle pinch bolt and nuts. They are manufactured from high-quality materials for maximum durability, and to OE dimensions for proper fitment and easy installation. URO Parts spindle clamping nuts offer guaranteed fitment and a 24-month Unlimited Mileage Warranty.
Not Yet Reviewed
$19.99
$11.50
If you've had a Wilwood front disc brake kit on your ride for a while and notice the effects of worn-out hubs, the complete solution is at your fingertips. These replacement forged billet aluminum brake hub assemblies are made from premium-grade alloy, crafted into shape under high heat and pressure, and then CNC-machined for a precise fit on each vehicle application. Wilwood brake hub assemblies are available for a variety of spindle types and rotor styles, and some packages include new bearing races and aluminum caps.
( 20 )
$199.32
PEM Racing offers Circle Track wheel hub assemblies in different bolt circles, most in pairs with rotor included. (Some individual models do not include a rotor.) The hubs are designed for Grand National rear-ends, most to bolt onto your 9 in. Ford floater housing. Wheel hub assemblies connect the wheel to the vehicle's axle, enabling the wheel to rotate freely and supporting the weight of the car.
Not Yet Reviewed
$286.99
—
$514.99
Is removing the axle nuts on your quad making you nuts? If you have problems with your stock nuts, switch to ModQuad locking axle nuts. They are designed for high performance quads and have a unique pinch bolt locking system, which keeps keep the locknut secure. They are made from billet aluminum and are available in polished or black anodized finishes. Put an end to stock axle nut loosening issues!
Not Yet Reviewed
$66.99
—
$68.99
JOES Kart/QM front hubs feature sealed roller bearings for reduced friction. The billet 6061-T6 aluminum kart hubs are precision-machined to roll true for more speed. Hubs are black anodized with laser etched graphics, and fit 5/8 in. spindles. These Kart/QM front hubs feature an American standard wheel bolt pattern for both 1/4 in.-28 and 5/16 in.-18 on 2.5 in. bolt circles. Equip your kart or quarter midget with the best front wheel hubs available—from JOES Racing Products!
Not Yet Reviewed
$47.95
JOES Kart/QM rear aluminum hubs are black anodized and laser-etched for a durable finish. They're precision-machined to roll truer than knock-offs. Use the short version or the long version to adjust your kart or quarter midget for the conditions. Concentric machining and quality finishes result in faster times. These rear hubs fit 1 1/4 in. axles, with sealed bearings providing smooth operation. Standard American bolt pattern for both (drilled/tapped) 1/4 in.-28 and 5/16 in.-18 on 2.5 in. bolt circles.
Not Yet Reviewed
$45.95
Summit Bucks
ACDelco GM Genuine Parts wheel bearing and hub assemblies support the vehicle while allowing the wheel to rotate. They are a GM recommended replacement for your vehicle's original component. These GM Genuine Parts wheel bearing and hub assemblies have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 14 )
$58.50
—
$157.99
Dorman wheel hub fasteners are designed to secure your hub assembly to the wheel. This wheel hub mounting hardware serves as a direct replacement and is made from high-quality steel for durability and corrosion resistance to offer a complete, convenient repair. For OE automotive repairs, look to Dorman.
( 14 )
$8.99
—
$53.95
Wilwood forged billet hat mount hubs are made from premium grade alloy billets, forged into shape under high-heat and pressure, then CNC-machined for precise fit on each spindle application. Intended for use with aluminum mounting hats, hubs include bearing races and screw-on aluminum caps.
Not Yet Reviewed
$167.56
Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts
( 702 )
$102.99
—
$180.99
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$20.99
—
$107.99
Yukon Gear & Axle Mighty axle seals use the latest designs and manufacturing technologies to produce a precision fit, tight seal, and long life. Maybe your old seals are starting to wear or maybe you're replacing axles—both are a good time for new seals. Whatever the reason, order the Mighty seals from Yukon Gear & Axle designed to fit your application.
( 36 )
$6.99
—
$82.99
Summit Bucks
Clearance
ACDelco Silver wheel bearing and hub assemblies are quality high-value options available for most makes and models, and backed by General Motors. They offer the fit, form and function of premium aftermarket brakes at a more economical price, as well as dependability and performance without sacrificing important features and benefits. You can count on the ACDelco Silver Series to deliver everything you need and want in a replacement, including peace of mind.
( 9 )
$184.99
$113.99
—
$131.50
Clearance
Hubcaps work through constant environmental exposure, including hot, cold, wet, dry and road salt conditions. To fight back, SKF Scotseal hubcaps combine sophisticated design with tough materials ranging from polymers to zinc-plated steel clad in weather-resistant dichromate armor. There are other hubcaps on the market, but none provide better wheel-end protection. For well over a decade, SKF Scotseal hubcaps have helped fleets log literally billions of trouble-free miles. All SKF Bearings' products are designed and manufactured to the highest quality standards, ensuring long life and safety.
Not Yet Reviewed
$26.99
$14.50
Wilwood forged billet aluminum vented rotor offset hubs are made from premium grade alloy billets shaped under high heat and pressure, then CNC machined for a precise fit on each spindle application. Intended for use with intermediate adapter plates, but they can also be used with aluminum mounting hats for custom applications. Hubs are available in multiple wheel lug patterns (depending on part number) and include bearing races. Some Wilwood forged billet aluminum vented rotor offset hubs include screw-on aluminum caps, while others use a press-on steel cap available separately. Select the correct fit for your vehicle's setup.
Not Yet Reviewed
$158.74
Clearance
Raybestos R-Line wheel hub assemblies are designed to OE specifications—and tested for endurance, temperature control, hydraulic and salt resistance, as well as metallurgical integrity and vibration. This ensures Raybestos R-Line assemblies deliver a long service life with consistent performance that's quiet and safe. Order the model designed for fitment on your vehicle application.
( 20 )
$202.99
$140.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
