Availability
Showing In Stock Items. Show All 51 Items.
Motive Gear Ten Factory axle tube seals keep water, mud, and debris from entering your front axle housings. Crafted from billet aluminum and durable rubber, they look as good as they perform! Choose from red powdercoated, black powdercoated, or natural aluminum. The dust seals are available for hundreds of applications. Keep the junk out of your axles with Motive Gear Ten Factory axle tube seals.
( 7 )
$64.99
—
$75.99
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel wheel hub assemblies come complete with Timken USA bearings and races and a corrosive-resistant coating. In these front hubs, the races will be installed along with new stock size wheel studs, and a new castle nut, cotter pin, washer, and grease cap are included. Each hub is inspected after the races are installed for proper run-out spec to ensure optimal braking performance and no pad knock. Choose the kit specified for your Corvette.
( 2 )
$316.99
Detroit Speed offers wheel hub conversion kits for hundreds of Chevrolet and GMC vehicles from the 1990s and up. They will convert select 2WD applications to a 5-lug bolt pattern. This allows you to have more options for aftermarket wheel and brake systems. The DSE wheel hubs have both 5 x 5 in. and 5 x 4.75 in. bolt patterns. Use of high performance hubs results in improved hub stiffness and performance, reduced brake caliper piston knock-back, and improved hub durability. The wheel hub remains in the factory location and does not affect wheel offset. Additional details: * Convert your 6-lug hub packs to a 5-lug for more aftermarket wheel and brake options * 100 percent bolt-on for a quick and easy installation in your garage * Modern wheel hub bearings with dual bolt pattern * Bullet nose machined wheel studs * Electroplated black zinc rust-proof coating * DSE wheel hubs do NOT have ABS sensors * NOT compatible with 4WD applications
Not Yet Reviewed
$498.95
Spicer Drivetrain Products offers wheel hub mounting studs for a variety of vehicle and Dana axle applications. The Grade 8 steel fasteners have a black finish for protection—and are available in different lengths and thread sizes. Genuine Spicer light vehicle axle products are manufactured to the same high standards as OE parts because they're direct-fit replacements. They meet or exceed factory specifications. Order the studs recommended for your truck or Jeep.
( 1 )
$3.99
Service the drivetrain on your off-road bike with a Pivot Works watertight wheel collar and bearing kit. These packages include an upgrade over factory wheel collars, with components military-spec hard anodized to resist rust and corrosion. The O-ring prevents rain, snow, and dirt from entering the hub between the axle and collar. Pivot Works kits are tailored for fitment on specific makes and models—and come complete with bearings, seals, collars, and an extra set of O-rings.
Not Yet Reviewed
$29.50
—
$71.99
Trail-Gear Trail Safe wiper seals keep your knuckle balls cleaner, ride after ride. How? With engineering innovation! Each of these knuckle ball wiper seals feature a double-sided design—with a grease seal lip and a wiper seal lip that efficiently keep the dirt out and the grease in. They're constructed in one-piece of high-grade polyurethane, not UHMW, which means they're more durable and pliable for easier installation and a lifetime of dependability. Tired of wiping the clumps of dirty, sandy grease off your knuckle balls? Toss the factory felt and rubber … and replace them with innovative Trail-Gear Trail Safe wiper seals. Your kit includes: * Trail Safe knuckle ball seal wipers * Rock ring kit * Rock ring bolts * M6 lock washers
( 1 )
$101.99
—
$119.99
Auto Metal Direct front wheel bearing caps finish your classic's wheels with original style. These AMD stamped steel caps are exact reproductions of the factory original "button-style" units. They are zinc plated. Little details matter; restore you classic's appeal with Auto Metal Direct front wheel bearing caps.
( 14 )
$18.99
Clearance
Dorman pre-pressed wheel hub assemblies are time-saving and cost-efficient solutions for complete hub assembly repairs. Dorman OE FIX offers one pre-assembled unit, consolidating all four components and ready for installation right out of the box—significantly cutting labor time. The dealer repair option is to purchase components separately, requiring a specialized shop press and/or labor-intensive assembly prior to installation. Dorman OE FIX is the better option. Order the model designed for your vehicle application. Dorman pre-pressed wheel hub assemblies feature: * No special shop press tool required during installation, saving one to two hours of labor * Component pieces are factory manufactured and assembled under rigorous quality control measures, delivering higher consistency to meet or exceed the application needs * Cost-savings advantage to purchasing components separately * Constructed from quality materials for high performance and durability
( 37 )
$207.99
$43.50
—
$546.99
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel front wheel bearing and spindle rebuild kits contain top-quality components needed for the job—just add backing plates to complete your spindle rebuild. Choose the proper kit for your Corvette year. Kits include: * Timken bearings * SKF seals * Grease caps * Castle nuts * Cotter pins * Spindle washers * Spindle gaskets * Lug studs * Steering arm hardware
Not Yet Reviewed
$174.99
Classic Performance C5 hub and bearing packs eliminate flex on the factory spindle pins. These modern sealed bearing pack have a lot to offer your classic's performance. Stop caliper piston push back with CPP C5 hub and bearing packs.
( 1 )
$98.99
Spicer Drivetrain Products offers wheel bearing seals for a wide range of applications—including many Chevy, Ford, Dodge, GMC, Hummer, American Motors, International, Isuzu, Jeep, and Nissan vehicles from 1960 and up. These replacement seals are made from factory materials and specs to ensure proper fit and performance. They effectively keep fluids in, while sealing out dirt, dust, and moisture.
( 1 )
$8.99
—
$20.99
Moser Engineering axle bearing press rings are available in sizes to fit various axle model applications. These replacement rings are machined from steel to precise factory specifications. Order the press ring diameters needed for your axle.
( 3 )
$10.00
GSP wheel hubs are engineered to provide OE fit, form, and function. They use premium materials, coupled with precise machining and balancing, to ensure smooth, vibration-free performance in all driving conditions. Additional features and benefits of GSP complete hub assemblies: * All-new components, engineered to standards equal to or better than OE * Tempered hub components are tougher and less brittle to ensure long-term durability and resistance to impact damage * Each hub is dyno-checked for proper sensor output before leaving the factory
Not Yet Reviewed
$38.99
UMI Performance 1978-88 GM G-Body brake conversion kits include laser-cut UMI conversion brackets, lightweight aluminum hubs, and premium bearings—everything needed to adapt the C5/C6 abutment brackets, calipers, and rotors to the G-Body spindles. The hub features 5 x 4 1/2 and 5 x 4 3/4 bolt patterns and is intended to face mount the C5/C6 brake rotor in exact factory location (front track width is unaffected). Each kit includes premium bearing cups and cones, along with the correct rawhide seal for great performance and reliability. These conversion kits are the choice for UMI's Green Machine and have been thoroughly tested to withstand road race and Auto-X competition. They fit a wide range of Chevrolet, GMC, Buick, Oldsmobile, and Pontiac vehicles from the 1970s and '80s. Kit includes: UMI conversion brackets, driver and passenger side aluminum hubs, correct bearings and seals to mount the C5/C6 calipers and abutment brackets. Additional details: Wheel studs are not included. 1/2 in.-20 threaded studs will be required to complete installation. Determine stud length after choosing wheel and considering offset, whether or not spacers are required, and after determining wheel flange thickness. Kit requires C5 or C6 calipers, rotors, brake pads and brake lines. A detailed list of GM part numbers is included. Now fits Wilwood SLC56 caliper. Does NOT fit Blazer spindle. Requirements: C5 brakes require a minimum of a 17 in. wheel for clearance, while C6 requires an 18 in. wheel. Please research wheel fitment before purchasing.
Not Yet Reviewed
$579.99
That strange noise you hear when cornering or making sharp turns may be a telltale symptom of worn-out bearings. Crown Automotive wheel bearing and hub assemblies allow you to repair these crucial safety and handling components with quality replacement units. Return to the handling and performance you expected when the vehicle rolled off the factory line. These assemblies are available in numerous variations for fitment on a wide variety of makes and models.
( 3 )
$46.99
—
$199.99
CA offers wheel bearing caps for a variety of applications—including many Chevrolet Corvette models from the 1960s, '70s, and '80s. These steel brake rotor dust cap replacements are machined in accordance with factory specifications to ensure proper fitment and long-lasting performance.
( 1 )
$6.99
LEED Brakes offers wheel hubs for a variety of applications, including many classic Ford Broncos from the 1960s and '70s. These forged steel drum brake wheel hubs are built to outlast and outperform the factory cast iron hubs. The heavy-duty replacements will enable you to conquer the toughest trails and most demanding off-road adventures with confidence. Strengthen your Bronco's spirit—order the hubs recommended for your truck. Additional notes: * Unmatched strength: Forged steel construction delivers superior durability compared to the weaker cast iron hub * Built for adventure: Tackle any terrain with the peace of mind knowing your hub can handle it * Perfect fit: Seamless compatibility with your factory drum brakes or LEED Brakes front disc brake conversion kits * Upgrade with ease: Simple installation gets you back on the road quickly
Not Yet Reviewed
$249.99
PEM Racing offers wheel bearing seals for 2.5 in. Grand National hubs. These double-lip replacements are manufactured with factory materials and specifications to ensure proper fitment and long-lasting performance. Each seal meets or exceeds OE quality standards.
Not Yet Reviewed
$12.99
GSP complete hub assemblies are engineered to provide OE fit, form, and function. They use premium materials, coupled with precise machining and balancing, to ensure smooth, vibration-free performance in all driving conditions. Additional features and benefits of GSP complete hub assemblies: * All-new components, engineered to standards equal to or better than OE, are used to manufacture GSP hub bearings and hub repair kits * Tempered hub components are tougher and less brittle to ensure long-term durability and resistance to impact damage * Hubs with sensors feature OE-specific harnesses and connectors for simple plug-and-play compatibility * Each hub is dyno-checked for proper sensor output before leaving the factory
( 8 )
$21.50
—
$136.99
Ford Genuine Parts axle seals are designed to exact specifications as the factory parts on your vehicle for proper form, fit, and functionality. These genuine Ford replacement parts fit the same as the original factory part because they're made by the original equipment manufacturer. The primary function of these axle seals is to prevent transmission fluid leakage, lubricating grease, or differential oil, thus safeguarding critical components and maintaining proper fluid levels. They also protect the axle and other parts from contamination, extending the lifespan of the drivetrain. Get the parts you need with the correct fit and performance you expect with Ford Genuine Parts. Select the axle seals designed for your vehicle application.
Not Yet Reviewed
$13.99
—
$41.99
Oil leaks anywhere on your vehicle can quickly snowball into even bigger problems. Ford Genuine Parts oil seals help to keep the lubricant where it belongs. These OE replacement gaskets are manufactured from factory materials and specifications to ensure proper fit and long-lasting performance. Order the seal recommended for your application.
Not Yet Reviewed
$16.99
Ford Genuine Parts water neck gaskets and O-rings are designed to exact specifications as the factory parts on your vehicle for proper form, fit, and functionality. These genuine Ford replacement parts fit the same as the original factory part because they're made by the original equipment manufacturer. Water neck gaskets and O-rings in Ford engines serve to create a reliable seal, preventing coolant leaks and maintaining proper engine cooling. These seals ensure that the engine's cooling system operates effectively, preventing overheating and ensuring engine longevity. Get the genuine Ford replacement parts you need for your vehicle with the correct fit and top-notch performance you expect with Ford Genuine Parts.
Not Yet Reviewed
$3.99
—
$6.99
Motive Gear offers wheel bearings designed to be exact replacements for your factory originals. Machined by Timken, the steel roller bearing configuration allows for maximum performance without sacrificing durability. They're available in styles and sizes for a variety of passenger cars, trucks, and SUVs.
Not Yet Reviewed
$13.99
—
$21.99
An upgrade that gets you more mileage per gallon and hubs that are easier to service, Yukon Gear & Axle spin free locking hub conversion kits are an enhancement anyone would want on their 4WD vehicle. Whether you service your vehicle yourself or you have a trusted mechanic, you don't usually like to keep difficult or expensive-to-fix things on your ride. These kits are not only easier to service, they help reduce wear and tear on your drivetrain components. They allow your front axle and drivetrain to disengage when in 2WD, preventing premature wear and improving fuel economy. Yukon Gear & Axle kits are available for various makes and models from the 1980s and up. Features include: * Reduced drag, resulting in greater fuel economy * Replaces vulnerable and expensive factory unit bearing * Kit includes heavy-duty 4340 chrome-moly outer axles * Premium hubs allow driver selectability * Complete kits contain all necessary components
( 11 )
$3,389.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
