Availability
Showing In Stock Items. Show All 385 Items.
Sierra is a leading supplier of marine engine and drive parts, offering 1,000's of parts including bushings that are designed to meet or exceed the OE part(s) they replace. For 50 years, Sierra Marine has proudly offered high-quality engine and drive parts as a trusted name in the marine industry. All Sierra Marine products are engineered to meet today's high horsepower engine demands, while withstanding the harsh marine environment. Order the Sierra Marine bushings that are designed for your application needs.
Not Yet Reviewed
$15.99
—
$40.99
On Sale
MSD Atomic transmission control modules are designed to adjust the operating parameters of later model electronically controlled 4-speed automatic overdrive transmissions. They're simple to configure with the supplied hand-held monitor--no PC required. You now have access to adjust shift points, adjust torque converter clutch behavior, select different levels of shift firmness, select between auto-shift and manual shift mode, and activate dyno mode to deliver repeatable chassis dyno results. The included hand-held monitor connects to them and can be left in place as a dashboard to monitor the transmission in real time, or can be disconnected when the configuration is complete. Once installed, these modules need only a few basic parameters to complete the initial setup. First, select the type of transmission you are using--all supported transmission types are listed in the menu. Other required fields include the number of engine cylinders, rear-end gear ratio, and tire height. Once this has been completed, you can now start and drive the vehicle, while taking advantage of the advanced setup menu items to dial-in the transmission to your liking. You can feel the results in real-time as a passenger manipulates the parameters and monitors the real-time data. Data available for viewing includes engine speed, vehicle speed, throttle position, transmission fluid temperature, shifter position, and commanded gear. Best of all, the MSD Atomic transmission control modules are available as completely stand-alone units or Brainwave-compatible for the Atomic EFI systems. A transmission controller harness is sold separately.
( 19 )
$899.95
$349.95
—
$808.95
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 51 )
$118.99
—
$148.99
Are you looking for a replacement slave cylinder for your clutch? Dorman has you covered with their OEM Dorman clutch slave cylinders. Dorman clutch slave cylinders deliver increased performance and reliability. Dorman has industry-leading slave cylinder application coverage that is second to none. If you want your clutch working at optimum levels, then you need one of these Dorman clutch slave cylinders.
( 72 )
$177.99
ATI PCS (Powertrain Control Solutions) offers automatic transmission controller replacement harnesses for model 705500, GM transmission 4L80-E or 4L85-E. The factory harness will work with carburetor or EFI applications.
Not Yet Reviewed
$251.99
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 59 )
$1,849.99
—
$6,190.99
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 57 )
$2,085.95
—
$4,932.95
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 144 )
$1,772.95
—
$4,996.95
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$2,700.95
—
$5,119.95
On Sale
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 1 )
$599.95
—
$728.95
$538.95
—
$655.95
Tremec introduces the Magnum-F 6-speed manual transmissions for fourth-generation Camaros and Firebirds. Designed to replace T-56 transmissions in 1998-2002 GM F-body cars, the Magnum-F leverages Tremec's pervasive TR-6060/Magnum architecture in order to provide fourth-gen enthusiasts significantly improved performance and relief from a shrinking pool of quality T-56 replacement parts. Born in the vacuum created by the release of the original T-56 Magnum (now known simply as 'Magnum') back in 2009, the Magnum-F fills a longstanding void in the overall Magnum line with regard to shifter locations—addressing not only LS1-powered '98-'02 F-bodies, but several other applications that utilize a similar shifter position. Beneficiaries include third-generation F-bodies, LT1-powered fourth-gens, LS-swapped late models of all varieties, and sport compact applications such as A80 Supras, FD RX-7s, and more! Where the original Magnum shifter locations may prove too far forward, and the extended length Magnum XL's too far back, the Magnum-F's in-between position often proves to be just right. Inside, the Magnum-F benefits from the same durable componentry found in many of today's hardest hitting OEM muscle and sports cars. Over the T-56, the Magnum-F transmissions boast increased face-width on all gears, a robust combination of double and triple cone synchronizers, enhanced webbing in the main case, provisions for a cooler circuit, and more! Tremec also took the opportunity to upgrade the shifter to an isolator-type unit, like that found on its Magnum XL. The shifter reduces in-cabin noise and vibrations, while at the same time providing the precise and communicative shift feel that all Magnums are known for. And, like all Tremec aftermarket transmissions, the Magnum-F is made from 100 percent brand-new OEM-quality content. Models with different gear ratios are available. Additional notes: * Close Ratio version for high performance street and road racing * 700 lbs.-ft. of torque capacity * Reasonably light at 135 lbs. dry * Multiple shifter locations and dual speedo pickups for unmatched versatility * Choice of two different gear ratio sets with unique double overdrive ratios * Incredibly short, extremely low-effort shift throws, with crisp, precise engagement * Modern OE supercar technology for the ultimate pro-tourers, road-racers, and more
( 11 )
$3,545.00
The kingpin of Tremec's high performance lineup, the T-56 Magnum double-overdrive 6-speed manual transmission, takes the very best from Tremec's current OEM technologies and pairs it with the most popular features of the TKO 5-speed. Known in its original equipment form as the 'TR-6060', the Magnum is an aftermarket version of the same transmission found in many of today's most celebrated factory super cars. Able to withstand a massive 700 lbs.-ft. of torque while providing unbelievably crisp shifts, no other manual transmission on the planet offers as much combined strength, versatility, and general ease-of-use as the T-56 Magnum. The units are available in a variety of gear ratios for different applications. Additional details: * The aftermarket's premier double overdrive 6-speed performance manual transmission * Reasonably light at 135 lbs. dry * Multiple shifter locations and dual speedo pickups for unmatched versatility * Incredibly short, extremely low-effort shift throws, with crisp, precise engagement * Modern OE supercar technology for the ultimate pro-tourers, road-racers, and more
( 6 )
$3,545.00
—
$3,999.99
Perfect for a mild daily driver or street rod, these TCI Street Rodder transmission packages give you all of the components necessary to install a new transmission. Using the highest quality TCI manufactured components, each Street Rodder package is equipped with an automatic valve body and valve body performance improvement kit that allows you to achieve firmer, yet not too harsh shifts in the vehicle while remaining fully automatic and retaining the stock shift pattern. Each Street Rodder transmission and torque converter undergo the industry-recognized triple testing to verify that internal fluid pressures and shift characteristics match the strict TCI quality control standards. Torque converters are tested to maintain that the impeller body and pump drive hub remain true and are then pressurized and lead tested to confirm the integrity of the weld seams. Finally, each unit is computer balanced to reduce drivetrain vibrations that can cause serious damage to your converter. For street cruisers who want excellent street performance and lasting durability, the TCI Street Rodder transmission packages provide the prefect solution.
( 1 )
$4,612.95
FTI Performance Pro Powerglide Level 5 transmissions are an unbreakable unit in an SFI-approved case. Equipped with the FTI creatively designed spiral springs and valve body, these units don't creep when the brake is set—a must in today's racing world. With in-house machining, these trannies are hand-assembled by one builder, so each clearance is set to exacting tolerances. The transmissions house the greatest advances in powerglide racing technology, and they're designed to withstand the rigors of today's high performance engines in an extremely demanding environment. Other features include: * 1500 advertised horsepower rating * Protree transbrake 250 lbs. * Lightened steel clutch hub * 1.80 straight cut planetary * Vasco input shaft * 8-clutch drum * Red race clutches * High-flow pump * 4340 output shaft
( 3 )
$4,899.00
Wilwood compact remote flange-mount master cylinders are precision-machined from high-strength aluminum. They're designed for limited space applications requiring the output capacity of a full-size master cylinder. These units can be mounted virtually anywhere for convenient service access. A standard mounting flange provides easy installation in any vehicle.
( 74 )
$106.64
—
$114.61
Summit Bucks
Sonnax SmartShell heavy-duty reaction shell kits prevent damage to the rear planetary assembly, as well as providing a reinforced shell. Stripped or cracked shells in GM 4L60, 4L60-E, 4L65-E and 4L70-E units are a common problem, but strengthening the shell alone does nothing to address the equally common problem of preventing thrust loads from overwhelming rear captured planetery bearings. From daily jobs to extreme builds, the Sonnax SmartShell heavy-duty reaction shell kits are the only way to prevent shell failure and protect the bearing.
( 21 )
$124.62
FTI Performance ESR Series torque converters are designed for mildly modified vehicles. They're built using Torrington bearings, race-prepped sprague hardened impeller hub, hardened turbine hub and splines, a new steel pilot, and laser-cut mounting ring. These units are available in a variety of sizes, advertised flash stall ratings, and numerous other options. Order the torque converter recommended for your transmission application.
( 64 )
$479.00
—
$799.00
On Sale
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 5 )
$939.00
—
$1,149.00
$845.10
—
$1,034.10
Made on state-of-the-art CNC equipment, ATI SFI flexplates are double MIG/TIG-welded with certified American-made materials that far exceed SFI specs for safety. They're manufactured and toleranced from actual OEM drawings to ensure precise fit and location. Each is quality-inspected to exceed the flatness and runout tolerances of the OEM units. They are also precision-balanced on Hines digital equipment with a resolution of 1/10 oz. per inch. Available in dozens of configurations, ATI SFI flexplates can be ordered for fitment on vehicles covering every decade since the mid-1950s.
( 73 )
$199.00
—
$329.00
Racing is for pros--FTI Pro Series Powerglides! Their Level 4 units, like all the Pro Series transmissions, house the greatest advances in racing technology. They are fitted with FTI engineered valve bodies and spiral springs--they will not creep when the brake is set. And they are in-house CNC-machined and hand assembled to ensure every clearance is set to exacting tolerances. Level 4 Powerglides are designed and built for serious racers, that not only need value, but demand dependable, consistent performance while handling the rigors of their high performance engine--in any environment. Every transmission is dyno-tested to confirm they are race-ready and bulletproof. No wonder they are the choice of champions, shouldn't they be yours, as well? FTI Performance Pro Powerglide Level 4 transmissions feature: * 1.80 straight-cut gear planetary * 300m hardened input shaft * Steel clutch hub * 6-clutch drum * Aftermarket SFI-approved case * High-flow pump * Deep aluminum pan * Pro Tree transbrake * Red race clutches
( 1 )
$4,699.00
Replacing older OE converters can be a challenge, often compelling customers to settle for makeshift solutions. You can remedy such an issue by choosing a LuK Clutch TorCon torque converter to restore smooth shifting to your automatic transmission. LuK's selection of converters provide the correct fit and function, covering a wide range of vehicles, assuring you will be able to find the proper unit for your vehicle.
( 2 )
$491.99
—
$1,245.99
Whether you drive a sand dragger, hill climber, or tractor puller, TCI has the transmission for you. The competition line of full manual 4x4 transmissions is built following the same specifications TCI uses in building thousands of drag race units. Applications are also available with trans-brake valve bodies.
( 1 )
$2,297.95
On Sale
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$1,217.95
$241.95
—
$1,616.95
McLeod Non-SFI aluminum bellhousings are the gold standard when it comes to accuracy and compact performance. These Non- SFI rated version is for those customers looking for a light weight bellhousing, but not concerned with a SFI rating so these units do not come with a steel block plate.
( 7 )
$185.00
—
$295.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
