Selected Filters


Loading...

Availability


Transmissions & Transmission Parts

Not Showing Customizable Items. View Customizable Items.

Part Groups

Results 1 - 24 of 47

FTI Performance Pressure Regulator Springs

FTI Performance pressure regulator springs are great for competition transmissions. These high-pressure springs will help improve your tranny's performance.

5.0 out of 5 stars ( 1 )

$7.99

TCI Pressure Regulator Springs

TCI's pressure regulator springs are a high-rate style that will permit pressures up to 250 psi, depending on boost valve selection. They're perfect for competition transmissions.

5.0 out of 5 stars ( 2 )

$20.95

$25.95

TCI Automatic Transmission Pressure Regulator Springs

High pressure needs high-rate springs, and TCI pressure regulator springs will make the psi that you need, depending on the boost valve selection. When you need replacement parts for your competition transmission, TCI will keep you in the race.

4.0 out of 5 stars ( 1 )

$26.95

ATI Automatic Transmission Adjustable Pressure Regulator Kits

ATI automatic transmission adjustable pressure regulator kits for the T-400 Super Pumps eliminate OEM boost valve and allows line pressure from 185 to 300 psi. The kit includes spring, spring seats, adjuster, set screws, nut, and instructions. Fine-tune transmission performance with an adjustable ATI pressure regulator.

1.0 out of 5 stars ( 1 )

$69.00

Sonnax Lube Regulated Pressure Regulator Valves

The OE pressure regulator valve design prevents adequate cooler flow at low rpm and high-pressure conditions, which can create overheating. Additionally, in 1999 and later vehicles, the factory EPC pressure was set high at idle, resulting in engine surge conditions in GM 4L80-E and 4L85-E units. Sonnax lube-regulated pressure regulator valves provide a significant increase in cooler flow under low rpm and high-pressure conditions that benefits all vehicles—and eliminates the need for reprogramming 1999 and later vehicles with high EPC pressure at idle.

4.9 out of 5 stars ( 21 )

$20.99

$86.99

Sonnax TCC Regulator and Isolator Valve Kits

Sonnax TCC regulator and isolator valve kits assist in recovering hydraulic control and renew TCC performance. Severe wear of the TCC (torque convertor clutch) regulator valve bore, caused by oscillation of the OE valve, allows the regulated converter to apply pressure to your exhaust. This is a primary cause for TCC-related slip code and overheated converters. Exhaust pressure also diminishes line pressure, which can result in burnt clutches. Excess wear at the isolator valve bore reduces TCC apply pressure. Reconditioning the bore and installing a Sonnax TCC regulator and isolator valve kit will restore normal TCC operation by reestablishing the hydraulic integrity of this circuit. Order the kit recommended for your transmission application. Features include: * Sleeve manufactured from highly wear-resistant aluminum * Hard-coat anodized aluminum regulator valve combats premature wear * Isolator valve lengthened to operate in unworn portions of the bore * Annular grooves help center valves in bore to reduce future side-load wear

5.0 out of 5 stars ( 5 )

$22.99

$90.27

Sonnax Automatic Transmission Pressure Regulator Valve Kits

GM 6L45, 6L50, 6L80 and 6L90 automatic transmission units may exhibit multiple line pressure and cooler/converter/lube flow problems due to excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts, and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing a Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs and provide a modest 5 psi increase across the pressure curve. Additional details: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Drop-in Zip Valve parts install quickly and easily Kit contents: * Valve * Spring * Drill bit .040 in. * 2 checkballs (1 extra)

5.0 out of 5 stars ( 2 )

$17.99

$62.55

Sonnax Pressure Regulator and Shuttle Valve Kits

Vehicles with a GM 8L45 or 8L90 automatic transmission may exhibit high or low line pressure that results in harsh/soft shifts, burnt clutches, loss of cooler and lube flow, and overheating of the transmission and converter. These problems may be caused by wear of the pressure regulator bore casting at the VFS signal port area and/or at the shuttle valve sleeve. Wear at the inboard port of the pressure regulator bore allows VFS (throttle) signal pressure to leak, preventing proper action of the pressure regulator valve and potentially allowing it to remain in the low line pressure position. Wear of the shuttle sleeve due to continuous oscillation of the shuttle valve creates a path for balance line pressure at the pressure regulator valve to exhaust, resulting in excessive low line pressure. Sonnax drop-in pressure regulator and shuttle valve kits restore hydraulic integrity to the lineup by addressing wear that subjects the transmission to either excessively high or low line pressure with upgraded materials and unique designs. The pressure regulator valve has been designed with a lengthened spring pocket spool at the VFS signal port area, which provides over double the sealing capability to this critical end of the valve and allows it to operate in unworn portions of the bore. The length of the critical shuttle valve diameter has been significantly lengthened to provide better sealing and durability of the assembly. Additional details: * Hardcoat anodized aluminum valves and highly wear-resistant billet aluminum sleeve combat premature wear * Pressure regulator valve VFS signal spool 200 percent longer than OE and operates in unworn area of the bore * Critical shuttle valve spool made 30 percent longer than OE for added sealing and durability * Drop-in Zip Valve parts install quickly and easily Kit contents: * Pressure regulator valve * Spring * Shuttle valve * Shuttle sleeve

Not Yet Reviewed

$65.06

TransGo Automatic Transmission Pressure Regulator Valves

TransGo Performance offers a variety of automatic transmission rebuild components—including pressure regulator valves for hundreds of applications, such as cars, trucks, and vans from Pontiac, BMW, Chevrolet, GMC, Hummer, Cadillac, Saturn, Oldsmobile, Daewoo, Saab, Isuzu, Buick, Avanti from the 1990s and up. These drop-in replacement valves correct, prevent, and reduce pressure rise shift quality issues. The pressure regulator valves are available individually or in kits with different rebuild parts (see details in Notes). Order the model recommended for your transmission and/or vehicle.

5.0 out of 5 stars ( 1 )

$25.71

$95.29

TransGo Oversized Pressure Regulator Reamer Tools

Engineered for performance, designed for durability, TransGo oversized pressure regulator reamer tools, made specifically for installation of TransGo's oversized pressure regulator valve to the pump stator. Made from high-quality U.S. steel, the reusable reamer has a heat-treated sleeve, is drill motor friendly, and does not require any expensive holding fixture. This solution corrects common problems, that your transmission will benefit from, while saving you money.

Not Yet Reviewed

$141.57

TransGo Oversized Pressure Regulator Valves

TransGo Performance offers oversized pressure regulator valves for a variety of automatic transmissions that have worn regulator valve bores. These replacement valves are larger than the original part and are designed to be installed after the bore is reamed, restoring proper hydraulic control and fixing issues like low line pressure, harsh shifts, and slipping clutches. Additional details: * Corrects, Prevents, Reduces: -- Extreme or low pressure due to worn pressure regulator bore -- Restores proper pressure regulator function * Engineered with longer valve lands for increased durability and longevity and machined for full-time line-to-lube * Oversized for extremely worn bores and/or high mileage vehicles * New pressure regulator spring delivers increased line pressure to compensate for warp and wear What they do: * Correct worn bores: The primary function is to repair damage from wear in the pressure regulator valve bore within the transmission pump * Restore line pressure: By compensating for the wear, the oversized valve and new spring restore the correct line pressure needed for the transmission to shift properly * Address transmission problems: Installing these valves can fix a variety of symptoms caused by worn bores, including: -- Harsh or soft shifting -- Torque converter clutch (TCC) slip -- Burnt clutches or planetary gears -- Overheating or burnt fluid Installation process: * The transmission pump bore must first be reamed to the correct size for the oversized valve. * The oversized valve and a new, calibrated spring are then installed, which often restores hydraulic integrity. * This is typically a more cost-effective solution than replacing the entire transmission pump

Not Yet Reviewed

$28.43

TransGo Oversized Torque Converter Regulator Valve Reamers

Engineered for performance, designed for durability, TransGo oversize torque converter regulator reamers are a reusable self-piloted steel tools, used to oversize the torque converter clutch regulator bore in the 45RFE, 545RFE, 65RFE, 66RFE or 68RFE pump. Specifically designed for installation of TransGo's oversized converter regulator valve, so no expensive holding fixture required, which saves you money.

Not Yet Reviewed

$249.57

Sonnax Compensator Feed Regulator Valve Kits

Bore wear at the compensator feed regulator valve allows critical pressure loss that prevents proper clutch timing and control, resulting in harsh shifts, bind-up, and possibly, burnt clutches. You can recover hydraulic control and renew shift performance by installing a Sonnax compensator feed regulator valve kit. These kits featuring a Sonnax drop-in Zip Valve provide you with valve, spring, sleeve, and retaining clip to restore normal compensator action. Features and benefits: * Hardcoat anodized aluminum valve combats premature wear * Highly wear-resistant aluminum sleeve provides additional valve support * Includes calibrated spring for restoring OE compensator pressure * Drop-in Zip Valve parts install quickly and easily

Not Yet Reviewed

$41.99

TransGo Automatic Transmission Compensator Feed Regulator Valve Kits

TransGo Performance automatic transmission compensator feed regulator valve kits play a critical role in managing clutch function and shift-feel in the 6L series. They supply regulated pressure to the balance side of the rotating clutch drums. This is done to counteract the unintended apply of clutches due to the centrifugal forces of the residual oil in the apply chamber. Ideally, this pressure and its resulting centrifugal forces cancel out the forces inside of the apply chamber, simplifying clutch apply calculations by the computer. If the pressure is too low or too high, it can dramatically affect shift quality. In cases of very high pressure, it can keep the on-coming clutch from applying resulting in a cut-loose. Product features: * Extended land works even in worn bores, providing more support to help prevent bore wear * Self-cleaning design prevents sticking in the bore * Drop-in hardened steel valve * Corrects, Prevents, Reduces: -- Harsh shifts -- Coast downshift clunks -- Soft or flare upshifts -- No or delayed engagement

Not Yet Reviewed

$19.29

TransGo Oversized S4 Regulator Valves

TransGo's new oversized S4 regulator valves GM 8L45 and 8L90 solve significant wear issues at the S4 regulator valve position. When General Motors made a change to the S4 regulator valve in both the 8L45 and 8L90 transmissions, the updated 2-land design and computer command strategy resulted in significant increased wear, even at low mileage. TransGo Performance redesigned this 2-land style S4 valve with an oversize hardened steel valve, lengthening the land on the spring side to restore hydraulic integrity of the circuit and sealing the signal oil side with a PTFE ring to ensure longevity. * Corrects/Prevents/Reduces: -- Slip 1-2 or 1-3 shift -- Harsh 1-2 or 1-3 shift -- Coast downshift clunks

Not Yet Reviewed

$25.71

Sonnax Pressure Regulator Valve Kits

GM 6L45, 6L50, 6L80 and 6L90 units may exhibit multiple line pressure and cooler/converter/lube flow problems caused by excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing this Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs, providing a modest 5 psi increase across the pressure curve. Features include: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Replacement spring provides modest 5 psi line pressure increase * No pump drilling required * Drop-in Zip Valve parts install quickly and easily * Note: Pump must be removed to install kit. This kit replaces the original Sonnax pressure regulator valve kit 104520-14K. Kit contents: -- Valve -- Spring -- Checkball

Not Yet Reviewed

$25.99

TransGo Automatic Transmission Converter Regulator Valves

2019-on Dodge RAM trucks equipped with the 68RFE automatic transmission can develop excessive wear at the torque converter clutch (TCC) regulator valve bore in the pump. This can often feel like a flare during shift. TransGo automatic transmission converter regulator valves are designed to restore the hydraulic integrity of the circuit—and include a new calibrated spring for the larger diameter valve. Additional details: * Fixes what feels like a flare during shifts * Prevents TCC slip codes * Precision steel oversized valve

Not Yet Reviewed

$26.50

Sonnax Zip Kits

Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes

4.82 out of 5 stars ( 11 )

$149.85

TransGo Lockup Valve Kits

These TransGo lockup valve kits contain new parts to maximize torque converter life in high-mileage OEM transmissions. They will help your transmission to operate more efficiently and improve overall reliability.

4.33 out of 5 stars ( 6 )

$47.57

Sonnax Hydraulic Line Pressure Booster Kits

Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together, providing progressive pressure increases as driving conditions become more demanding. Their springs are approximately 10 percent stronger than OEM and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it's needed the most. The combination of these springs and valves in the Sonnax hydraulic line pressure booster kits gives you the best of both worlds--a modest pressure increase at the low-end, with a high-end pressure that's equal to or greater than that of other aftermarket kit springs.

4.95 out of 5 stars ( 20 )

$16.99

$107.13

TransGo Automatic Transmission Boost Valves

If your transmission isn't performing properly, then you may need one of these TransGo automatic transmission boost valves. They are available in different diameters that provide increased line pressure so that your transmission will work correctly when used under conditions other than what the factory intended. Get the correct pressure with TransGo automatic transmission boost valves and you'll increase your transmission's reliability.

4.72 out of 5 stars ( 29 )

$21.47

$92.20

Sonnax Return Springs

Sonnax return springs are available in a variety of styles to assist in your automatic transmission rebuild. Replacement part types include high clutch return springs, pump slide springs, detent springs, reverse clutch return springs, and more. They're machined from quality materials for long-lasting performance, and can be ordered individually or in larger quantities. Select the springs required for your specific transmission application.

4.0 out of 5 stars ( 4 )

$3.99

$8.22

TransGo Automatic Transmission Torque Converter Clutch Valves

Engineered for performance, designed for durability, TransGo automatic transmission torque converter clutch valves help correct common lockup issues. The valves are available as a drop-in lockup balance valve or an oversized converter regulator valve. The drop-in balance valve prevents or reduces, lockup failure, chugging or killing engine at stop, and engine code 628 activations. The oversized converter regulator valves help correct valve bore wear, which can cause harsh lockup, excessive lockup slip, overheating, or activate P0740 lockup performance codes. These simple fix, drop-in solutions are available to correct common problems, eliminate the need to replace the pump, and save you money.

Not Yet Reviewed

$19.03

$27.14

TransGo Automatic Transmission Rebuild Components

TransGo automatic transmission rebuild components are engineered for performance and designed for durability. These kits address nearly every gearbox problem possible through quality that only a legend in the transmission repair industry can provide. Shift that clunky machine into reliability mode with TransGo automatic transmission rebuild components. Order the kit designed to fit your specific model.

4.91 out of 5 stars ( 11 )

$21.47

$186.57