Transmissions & Transmission Parts

Silver Sport Hydraulic Clutch Master and Slave Kits

Silver Sport hydraulic clutch master and slave kits are designed for use with the aftermarket Tremec Magnum 6-speed and Tremec T5, TKO, and TKX 5-speed transmissions. Each kit provides up to a 20 percent lighter clutch pedal effort compared to mechanical linkage, creates more room for headers, and cleans up your engine bay. The SST kits feature custom master cylinder mounts to take out the guesswork for the correct pushrod angle and an OEM-style, proprietary designed release bearing. It's rated at 7,000 rpms, has a forged aluminum housing, silicone dust boot, piston wiper seals, and a 1,000,000 cycle service life. Silver Sport complete hydraulic kits include: * Master cylinder * Master cylinder mount * Pedal pushrod/mounting components * Reservoir * Hoses * Concentric slave cylinder (slave cylinder/release bearing assembly) * Hardware * Detailed instructions

3.43 out of 5 stars ( 7 )

$649.95

—

$659.95

Silver Sport Hydraulic Clutch Master Cylinder Kits

Silver Sport hydraulic clutch master cylinder kits are offered for a wide range of vehicle applications. The components included in each kit may vary slightly due to application, but most will contain master cylinder, master cylinder mount, reservoir, pedal pushrod, hardware, and detailed instructions. The bore and stroke of the master cylinder are .750 in. and 1.4 in. respectively. Choose the SST master cylinder kit needed for your vehicle. Please note: This is the master cylinder kit only; release bearing is not included.

3.33 out of 5 stars ( 3 )

$299.95

—

$379.95

Mantic Clutch USA 9000 Series Twin Disc Clutch Kits

Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability

5.0 out of 5 stars ( 2 )

$2,476.00

Ford Performance Parts Clutch Linkage Upgrade Kits and Accessories

Available in self-adjusting or manually-adjustable kits, Ford Performance Parts clutch linkage upgrade kits and accessories feature billet aluminum construction and heavy-duty clutch cables. They'll provide you with years of smooth operation, while also providing softer pedal pressure and longer clutch life. Available options include: * Beefed-up clutch release forks and heavy-duty self-adjusting high-lubricity polymer-lined clutch cables * Parts required to convert stock non-adjustable clutch cables to fully-adjustable type so you can adjust clutch pedal travel to your driving habits * Adjustable clutch service cables * Some Fox body applications require the 1982 and later self-adjusting quadrant mechanisms (sold separately)

4.87 out of 5 stars ( 55 )

$52.99

—

$106.99

K&N Powersports Oil Filters

K&N Powersports oil filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. These filters trap harmful contaminants while their design allows for high oil flow rates. They are covered by K&N's limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals. For a high-performance design with outstanding filtration, order the K&N Powersports cartridge oil filters best suited for your application. More product features include: * High-efficiency media with uniform pleats * Ideal for high-end synthetic motor oil

4.78 out of 5 stars ( 27 )

$11.99

FAG USA Pilot Bearings

FAG USA pilot bearings offer high-quality for your project. They are produced worldwide for a wide range of applications to keep the input shaft centered and drivetrain vibrations down. Choose the one you need for your vehicle.

Not Yet Reviewed

$5.99

Beck/Arnley Automatic Transmission Filters

Beck/Arnley knows the value of a good fit, and their automatic transmission filters exceed OE standards for a fit that makes the difference in your engine. Made from quality media, they provide the fit, form, and function that you need for your vehicle's foreign or import engine. Get a perfect fit every time with Beck/Arnley automatic transmission filters.

4.64 out of 5 stars ( 11 )

$8.99

—

$20.99

South Bend Clutch Stage 2 Daily Driver Clutch Kits

South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.

3.17 out of 5 stars ( 6 )

$348.17

—

$435.20

Perfection MU Series Clutches

Perfection MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Features may include: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation

4.23 out of 5 stars ( 22 )

$109.99

South Bend Clutch Stage 1 Heavy-Duty Clutch Kits

Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.

4.82 out of 5 stars ( 17 )

$272.72

EPI Performance Pro-Series Clutch Kits

Want a stronger pull out of corners? EPI Performance pro-series clutch kits deliver bolt-on performance for aggressive riders who like to be in front of the pack. Pro-series clutch kits deliver tremendous amounts of low end and mid-range power while keeping your engine operating at the correct RPM to keep power on tap. These kits are great for stock snowmobiles with stock pipes and highly recommend the use of traction products. ATV/UTV kits can be used in mud racing, competition pulls, drag racing, or aggressive trail riding.

Not Yet Reviewed

$363.99

FAG USA Clutch Release Bearings

FAG USA develops and produces high-quality release bearings, roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications. Their clutch release bearings (throwout bearings) are made from high-quality materials to the correct specs, continuing to help your vehicle's engine disengage from the wheels when you depress the clutch pedal. Available to fit a wide range of vehicles, choose the one designed for your vehicle to restore proper clutch operation.

Not Yet Reviewed

$12.99

South Bend Clutch Stage 2 Drag Race Clutch Kits

South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$493.23

EPI Performance Sport Utility Clutch Kits

EPI Performance Sport Utility clutch kits are matched to your machine and your riding style to provide noticeable power gains! If you do a little bit of everything with your quad--trail riding, occasional mud and sand riding, plowing and hauling--you will find the "real-world" performance of these kits to be durable, reliable, and efficient. EPI Sport Utility kits deliver better low-end and midrange acceleration, along with quicker backshift for resulting crisp throttle responses. They reduce belt slip and heat; plus, they will make up for power loss and slow response when you mount bigger tires. Dial in your ATV/UTV clutches to your way of riding with these popular, all-around use Sport Utility kits from EPI.

5.0 out of 5 stars ( 2 )

$344.99

Ford Performance Parts Bellhousings

If you're doing an engine or transmission swap, building a kit car or street rod, or you just need a replacement bellhousing, look no further than Ford Performance Parts bellhousings. They are cast aluminum production-style bellhousings built to Ford's specifications, ensuring you of a high-quality product that's right for the job. Some applications may require minor modifications for transmission clearance and mounting.

4.29 out of 5 stars ( 28 )

$299.99

McLeod Clutch Forks

McLeod offers clutch forks for a variety of applications. Made of high-quality materials, they're available in several versions to suit your needs.

3.64 out of 5 stars ( 33 )

$65.50

McLeod Hydraulic Throwout Bearing Conversions

McLeod hydraulic throwout bearing conversions are designed to convert your vehicle over to hydraulic power. They produce a softer pedal effort, giving you more manageable and smoother clutch operation. Also included are stainless steel braided hoses, steel fittings, an aluminum slave cylinder and a remote reservoir. The McLeod hydraulic throwout bearing conversions use your stock pedal and are easy to install and adjust.

4.43 out of 5 stars ( 14 )

$495.00