Availability
Showing In Stock Items. Show All 50 Items.
On Sale
Summit Racing™ flexplate dust covers are manufactured from high-quality steel and are available in your choice of finishes. They allow for easy access to the torque converter area and prevent debris from entering your transmission's bellhousing.
( 342 )
$43.99
—
$50.99
$41.99
—
$46.99
On Sale
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 151 )
$2,024.95
—
$4,996.95
$1,724.95
—
$4,496.95
On Sale
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$2,250.95
—
$3,830.95
$1,950.95
—
$3,330.95
On Sale
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 55 )
$2,250.95
—
$3,478.95
$1,950.95
—
$2,978.95
On Sale
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 30 )
$2,210.95
—
$4,976.95
$1,910.95
—
$4,476.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 104 )
$949.95
—
$2,249.95
$632.95
—
$1,237.95
On Sale
These TCI StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. StreetFighter converters will give you about a 3,000 to 3,500 rpm stall speed. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
( 59 )
$624.95
—
$817.95
$574.95
—
$767.95
On Sale
These TCI Breakaway torque converters will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures them to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities that they gave their street/strip converter.
( 107 )
$509.95
—
$713.95
$459.95
—
$663.95
On Sale
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$427.95
—
$855.95
$377.95
—
$805.95
On Sale
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 46 )
$371.95
—
$746.95
$321.95
—
$696.95
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 46 )
$1,049.95
—
$1,299.95
$682.95
—
$844.95
On Sale
These Maximizer Street Performance torque converters are built with extra reinforcement and thicker mounting surfaces to withstand the additional load and vibration put through the drivetrain by a truck with performance modifications. By providing additional stall, your truck will see better initial takeoff and will not lug the engine when using big tires. Special attention is made to match the converters to the power range of most trucks that do double duty as off-road and daily drivers. Improved rear-wheel horsepower and elapsed times are some of the results.
( 7 )
$692.95
—
$786.95
$642.95
—
$736.95
On Sale
These TCI Super StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. Super StreetFighters provide the ultimate street performance with a stall speed of up to 4,000 rpm and competition-style launches. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
( 14 )
$692.95
—
$867.95
$642.95
—
$817.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$142.95
$92.95
On Sale
Designed especially for classes where a functional torque converter is required, these Circle Track converters are built to maximize efficiency and reduce slippage. These converters can reduce lap times by over a tenth of a second when compared to a stock converter. Other benefits include a rotating weight reduction of several pounds (all removed from the outside diameter, and thus improving engine braking in corners) and reduced transmission operating temperatures.
( 4 )
$460.95
—
$525.95
$410.95
—
$475.95
On Sale
The economical TCI Street Rodder transmission is ideal for small block powered vehicles, producing up to 400 hp—perfect for a mild daily driver or street rod. Equipped with a TCI automatic valve body and valve body improver kit, the Street Rodder allows you to achieve a firmer, yet not too harsh shift in the vehicle while remaining fully automatic. These torque converters are available in a variety of size options for nearly a dozen Chevy, Ford, and Mopar transmission models.
( 16 )
$383.95
$333.95
On Sale
Recalibrate your automatic transmission for optimum performance and extended life! B&M Transpak kits create new shifting characteristics by re-routing fluids through your transmission's valve body. Each kit includes two options: RV/Heavy-Duty and Hi-Performance Street. RV/Heavy-Duty is for towing, off-roading, or other heavy-duty use. Hi-Performance Street gives you quicker, snappier shifts than RV/Heavy-Duty, with standard shift points and automatic features when in "drive."
( 24 )
$199.95
$109.95
On Sale
During every clutch upgrade, you should measure to see if a shim is necessary for installation. Shimming the release bearing ensures proper clutch engagements. These 6061 aluminum Holley release bearing shims are available in different thicknesses—and are sold individually or in sets.
( 4 )
$48.09
$26.45
On Sale
Mr. Gasket transmission dipsticks complement your engine compartment with beautiful chrome. These steel dipsticks are available in one-piece designs with attached mounting tab, and in 2-piece designs with separate bellhousing mounts. Choose the model designed for your transmission application. Your Mr. Gasket dipstick may include: * Dipstick * Chrome plated steel tube * O-ring * Separate bellhousing mounting tab
( 6 )
$32.04
$20.83
On Sale
Mr. Gasket pressure plate bolts are machined for strength and safety. They're heat-treated to Grade 8 specs to ensure strength—and black oxide plated to resist rust and corrosion. The Ultra-Seal specialty fasteners are available in a variety of thread sizes to fit dozens of Chevy and Ford engine applications from the 1950s and up.
( 11 )
$18.86
—
$18.95
$12.26
—
$12.32
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$435.95
—
$1,349.95
$239.95
—
$742.95
On Sale
Mr. Gasket braided stainless transmission dipsticks ensure you have the right level of oil. And the braided stainless steel with polished billet aluminum handles looks great. For firewall mounting, each of these Mr. Gasket dipsticks include oil fill tubes. Choose the model designed for your specific transmission.
( 24 )
$95.79
$62.26
On Sale
These bolts are heat treated to Grade 8 specification and have a reduced profile hex head for clearance. Their black oxide finish resists rust and corrosion. Lock washers are included.
( 16 )
$30.71
$19.96
On Sale
QuickTime offers bellhousing accessories, including these dowel pins, to help you to complete your project. They're made from quality material and are designed to correct the improper register bore alignment of bellhousing to your engine crankshaft center line.
( 4 )
$62.05
—
$83.35
$34.13
—
$45.84
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
