Filters
FTI Performance offers a variety of direct drum clutches for your Powerglide transmission. They're made from red race material and are available in multiple thicknesses. Maintain smooth operation with transmission parts, gaskets, and clutches from FTI.
( 1 )
$7.29
—
$8.75
Summit Racing™ flywheel bolt kits are heat-treated to Grade 8 specifications, and have a reduced-profile hex head for clearance. Their black oxide finish resists rust and corrosion, and the kits include lock washers.
( 19 )
$9.99
Properly secure your flywheel with these flywheel bolts from Chevrolet Performance. These high-quality bolts feature steel construction with a durable black oxide finish.
( 5 )
$3.99
These RAM Automotive pilot bushings eliminate the wear and tear that stock bushings put on your transmission input shaft. They offer longer life and better alignment, especially with high-output engines and sticky tires.
( 68 )
$6.99
—
$10.99
FTI Performance automatic transmission clutch steels are rebuild components often needed with Powerglide applications. These replacement parts are available in various thicknesses, as well as direct and reverse models.
( 2 )
$5.29
—
$8.25
Replace worn-out torque converter bolts with a fresh set from Summit Racing™. These replacement hardware kits contain Grade 8 steel bolts that have been heat-treated and black oxide coated. They're available in different thread sizes for a variety of transmission applications.
( 12 )
$7.99
Sonnax valve body check balls are lightweight orbs that seal better. Manufactured from tough, wear-resistant imidized plastic, these check balls conform to the separator plate ball seats, creating a good seal. Steel balls are heavy and hard, causing wear on your separator plate seats from repeated high impact, while elastomer rubber ones wear easily, reducing their size and sealing ability. For excellent results from your valve bodies, service them with Sonnax imidized check balls.
( 12 )
$7.99
Crown Automotive clutch fork pivot balls allow for the adjustment of the release fork height when the clutch assemblies are changed. An improperly aligned clutch fork can increase the amount of pedal throw required to release the clutch. The surface where the pivot ball and clutch fork meet should be round, without any flat spots. These replacement parts from Crown are a direct fit for your Jeep.
( 5 )
$1.99
—
$8.99
These funnel adapters from Lokar adapt your standard funnels to Lokar transmission dipstick tubes. They're easy to use, too--simply insert the aluminum piece into the transmission dipstick opening. Then push your regular automotive funnel into the top of the plastic tube, and fill.
( 1 )
$9.95
Dorman transmission case vents offer OE operation and fit. You'll keep your vehicle on the road longer for less when you restore proper transmission ventilation. When excess case pressure is prevented, the transmission is protected against fluid leaks.
( 12 )
$2.99
Chevrolet Performance offers these flexplate bolts for a variety of engines. They're made of top-quality materials by a name you can trust!
( 5 )
$6.99
—
$8.99
ARP torque converter bolts are manufactured from 8740 chromoly steel and feature 200,000 psi tensile strength. Add a set to your drivetrain, and shearing torque converter bolts are a thing of the past.
( 273 )
$7.99
Summit Racing™ clutch pressure plate bolt kits are used to attach clutch pressure plates to flywheels. They're made from high-strength alloy steel with a protective black finish--and offer an OE-fit and function. When replacing your clutch, why take a chance with old fasteners when you can use new high-strength bolts from Summit™. They're available to fit a wide variety of year, make, and engine applications.
( 2 )
$10.99
Are you trying to locate just the right bolt to complete your clutch repair? Dorman's torque converter bolts ensure the correct bolt length, thread pitch, and strength. These high-quality, steel-constructed bolts are coated with black oxide for corrosion resistance, and the threads are coated with a special thread-locking compound to maintain proper bolt torque. These direct replacements provide a proper fit every time--no special tools are required for installation.
( 9 )
$5.99
—
$9.99
Sonnax automatic transmission clutch friction plates limit slipping for smoother shifts. Their selection of red-material frictions is available in several types and thicknesses to meet the needs of your specific rebuild. High performance, heavy-duty friction plates from Sonnax revive the winning performance of your automatic transmission's clutch.
( 1 )
$11.16
Timken Bearing manual transmission bearings will make sure that your transmission is working correctly. They are available for different models and gear positions inside of the manual transmission case. These high-quality manual transmission bearings are built within specific tolerances for fit and function. When your manual transmission bearings need to be replaced, look to Timken Bearing for help.
( 7 )
$5.99
—
$11.99
Sonnax governor gear kits include nails and a roll pin. A common failure point of your governor is the gear. When you need to replace it, Sonnax governor gear kits will restore timely shifts of your automatic transmission.
( 17 )
$6.99
—
$7.99
Whether you're dropping in a freshly rebuilt V8, or just replacing worn-out motor mounts, make premium-quality Summit Racing™ motor mount bolts your go-to choice. These hardware sets are available for a range of applications—from small and big block Chevys, to small block Ford Windsors. Each package contains rugged steel hex-head bolts with a protective finish for corrosion resistance, along with a set of flat washers. Install your engine with confidence; it all starts by securing the motor mounts to your engine block with extra-strong specialty bolts from Summit Racing™.
( 9 )
$7.99
Offering the same quality, reliability, and durability as GM original equipment, ACDelco torque converter dust covers ensure that no foreign objects or debris get near your flexplate or torque converter. These replacements feature durable molded ABS plastic construction and are available for fitment with a variety of transmission types. Order the torque converter dust cover designed for your vehicle.
( 7 )
$4.99
—
$10.99
Bolts weaken over time, and may not be as strong as they were when they were new. New converter bolts are cheap insurance against fastener failure, which could lead to expensive converter and transmission damage! These TCI torque converter bolts can give you peace of mind.
( 9 )
$15.95
ATP flexplate bolts are made of high-quality steel and meet or exceed all OE specifications. Most vehicles with automatic transmissions have flex plates that connect the engine and torque converter. Constant expansion and contraction of a flex plate over time can result in cracks or shearing of the flex plate—causing serious and expensive damage. Whenever a flex plate is replaced, it makes good sense to replace the bolts securing it. Order the replacement bolts recommended for your year/make and engine application.
( 3 )
$9.99
These TransGo automatic transmission accumulator pistons are designed to replace the original plastic accumulators that break or crack after prolonged use. They are manufactured from aluminum and machined to precise specifications for a simple bolt-in installation.
( 22 )
$9.00
—
$10.56
Worn babbit pump bushings in your GM Powerglide, 350, 400, or Allison AT540 transmission can allow the converter hub and inner pump gear to move off-center, thus causing damage to pump gears and the pump housing crescent. You can replace the worn originals with automatic transmission oil pump bushings from Sonnax. These direct replacements have tighter tolerances for improved fit over OE units, and they're lined with highly wear-resistant PTFE to help maximize the life of the older style and increasingly rare pumps. Order the bushings recommended for your application.
( 2 )
$4.99
—
$7.99
Transmissions are one of the most neglected aspects of regular maintenance. Premature transmission failure can be easily prevented by changing the fluid and filter regularly. FTI Performance automatic transmission filters improve the longevity and durability of transmissions by catching foreign particles, varnish, and sludge, while allowing the transmission fluid to lubricate and cool moving parts.
( 11 )
$5.99
—
$9.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
