Availability
Showing In Stock Items. Show All 29 Items.
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$839.99
—
$920.99
An increasing number of vehicle manufacturers are using double clutch transmission technology, enabling comfortable gear changes without interruption of traction power, while at the same time reducing fuel consumption and CO2 emissions. Like almost every clutch, the double clutch can also wear out. However, replacement is not possible without special tools. This is because the double clutch is firmly meshed in the gearbox bell and must be removed together with the gearbox. LuK RepSet 2CT clutch kits offer a unique repair solution for dry and wet double clutches. With a LuK kit and the corresponding special tool, repair shops can repair double clutches quickly and professionally. Besides the double clutch, LuK RepSet 2CT kits contain all the precisely matched components in OEM quality which are necessary for the replacement of the respective double clutch system. These include guide sleeves, retaining rings, fixing screws and lever actuators, or engagement levers and engagement bearings. Features to note: * For dry and wet double clutches * Includes all parts needed for the repair * OE quality and perfectly coordinated * Safe mounting due to simple installation instructions * High-quality special tool for the perfect repair
( 14 )
$799.99
The downsizing of modern passenger car engines enables reduced fuel consumption and CO2 emissions, but can also increase rotational irregularities and natural vibrations. Torsional vibrations transmitted to other components in the drivetrain diminishes comfort and may even lead to component damage, therefore effective vibration damping is essential. LuK dual mass flywheels (DMF) reliably dampen torsional vibrations in the powertrain and ensure high gearshift and driving comfort in all speed ranges. Unlike a conventional flywheel, DMFs consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated to almost completely absorb the torsional vibrations of the engine. Precisely matched to the respective vehicle, each LuK DMF enables low-speed driving and ensures lower fuel consumption, as well as reduced emissions. Order the proper size for your vehicle.
( 12 )
$751.99
—
$1,007.99
TCI TCU 2.0 automatic transmission controllers are fully programmable with the included T-Com 2.0 laptop software. They feature Dual Tune Technology, so you can create and easily switch between two completely different shift modes--daily driving or performance. The ability to make infinite adjustments to shift points and line pressure provides for maximum performance from automatic electronic transmissions and they are paddle/button shifter compatible. TCI designed the controller to be compact with LED diagnostics and data logging functions. TCU 2.0 is also compatible with FAST EZ-EFI 2.0 and XFI fuel injection systems through the CAN/BUS connection and can be configured to read engine sensors and transmit data to other modules and displays. Twelve outputs allow for precise, closed loop current control and programming of non-transmission control functions, such as engine shutdown after a specified idle duration. Features and benefits: * Fully programmable with T-Com 2.0 laptop software * Create and switch between two different shift modes * Make infinite adjustments to shift points and line pressure for maximum performance * LED diagnostics * Data-logging functions * CAN/BUS capability to share data with other systems * Paddle/button shifter compatible * Twelve outputs allow for precise, closed loop current control and programming of non-transmission control functions
Not Yet Reviewed
$1,130.95
If your diesel pickup truck has major power, or you consistently tow heavy loads, FTI Performance Diesel BA-3 Series torque converters are for you. With three disks, CNC-ported stators, and 4340 turbine splines, strength and performance are built in. Their billet front covers, furnace-brazed and TIG-welded fins, and heavy-duty sprag modifications combine for impressive units. FTI has tested these converters under extreme conditions, ensuring they'll stand up to your towing, driving, and performance racing needs. BA Series converters provide more torque multiplication, lower transmission temperatures, improved acceleration—and, when you can keep your right foot under control, better fuel mileage! Whether you drive a Cummins, Powerstroke, or Duramax, FTI Performance Diesel BA-3 Series torque converters put the power to the ground.
Not Yet Reviewed
$849.00
For all of your driving needs, you'll enjoy the strength and feel of FTI Performance Diesel BA Series torque converters. These units include billet front covers, heavy-duty sprag modifications, and furnace-brazed and TIG-welded fins. Their single disc works great for everyday driving and moderate towing. BA Series converters provide more torque multiplication, lower transmission temperatures, improved acceleration—and when you can keep your right foot under control, better fuel mileage! Give your pickup truck the power to control your ride with an FTI Performance Diesel BA Series torque converter. Order the model recommended for your transmission application.
Not Yet Reviewed
$859.00
—
$959.00
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$799.95
—
$1,049.95
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 83 )
$825.00
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 46 )
$995.00
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$777.95
—
$999.95
B&M Traveler torque converters are designed for use in motor homes, tow vehicles, or other heavy-duty applications where a slightly higher stall speed is helpful in getting the vehicle moving. Stronger than a stock converter, these Travelers have been internally modified to provide about 300 rpm more stall speed. This helps in initial acceleration without sacrificing normal highway operation. Pressure tested, fully balanced, and manufactured for long life, these Traveler converters will get you moving and on your way.
( 3 )
$899.95
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$771.81
—
$998.17
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 5 )
$753.19
—
$870.51
Dorman transmission electro-hydraulic control modules (TEHCM) combine the TCM, valve body solenoids, and pressure and temperature switches into one unit. They restore the ability to shift the vehicle in and out of gear without hesitation or rough shift. They're fully remanufactured and vehicle simulator-tested for durability and quality assurance. Vehicle VIN is required at time of order. Requires programming after installation.
( 11 )
$864.99
—
$887.99
If your clutch seems to be giving you the slip, Sachs Stock Replacement clutch kits are an affordable option for repair or replacement to help you restore your vehicle back to its proper operation. Sachs Stock Replacement clutch kit components are built to OEM specifications to offer the same fit, form, and function as the factory OE part for a safer, more comfortable drive. Choose the replacement clutch kit designed to fit your application needs.
( 8 )
$853.99
—
$1,046.99
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$786.24
—
$1,062.00
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 239 )
$852.99
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 303 )
$1,049.95
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$811.22
Manufacturer Rebate
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 5 )
$939.00
XClutch Stage 2R clutch kits are performance upgrades that have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. XClutch utilizes the latest ceramic technology in their Stage 2R performance kits and are mated with a high performance pressure plate. These kits are recommended for vehicles requiring a higher level of torque holding and heat capacity. Order the clutch kit designed for your application needs.
( 1 )
$811.52
—
$1,080.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
