Availability
Showing In Stock Items. Show All 65 Items.
Clearance
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 52 )
$148.99
$85.50
—
$98.99
Summit Racing™ torque converter lockup kits are a simple way to control converter clutch lockup in 4th gear when swapping a GM 700R4 or 200-4R transmission in an early non-computer controlled vehicle. The adjustable vacuum switch will hold the clutch on during steady state cruising and disengage when accelerating or downshifting. Summit Racing™ torque converter lockup kits are available in automatic (+12V applied via vacuum switch) and manual (+12V applied via toggle switch) versions. Choose the one preferred for your application.
( 6 )
$89.99
Listen up, performance enthusiasts—if you prefer automatics, you'll be interested in these torque converter lock-up kits from Chevrolet Performance. They're designed to adapt the 4L60 or 700R4 transmissions (non-electric version) in early-model GM vehicles. These transmission performance kits include a throttle valve spring for carbureted engines, a normally closed fourth gear clutch switch, a wiring connector for the torque converter, and an instruction sheet to facilitate the installation.
( 5 )
$85.70
Keep your lockup kit operating smoothly with B&M torque converter lockup kit components. These replacements, such as the speedometer cable and generator, are designed specifically for use with the B&M torque converter lockup kit.
( 4 )
$55.59
These TransGo torque converter conversion kits are designed to correct converter fluid flow to the primary pump area so the torque converter will stay full under high load conditions. They are designed for use with non-lock up torque converters and will help to increase the reliability of your automatic transmission. Available for multiple transmissions, the TransGo torque converter conversion kits will get your transmission performing correctly again.
( 7 )
$66.56
These TransGo lockup valve kits contain new parts to maximize torque converter life in high-mileage OEM transmissions. They will help your transmission to operate more efficiently and improve overall reliability.
( 6 )
$52.99
—
$64.29
Clearance
Max Torque Box Stock/Clone clutches was designed for the Clone engine market. They are very similar to the SS-Series clutch but are able to withstand the rigorous requirements of the Clone racing engine. They are offered in different chain sizes and sprocket tooth counts. Choose the proper Max Torque Box Stock/Clone clutch for your Kart.
Not Yet Reviewed
$116.99
$56.50
—
$101.99
Summit Bucks
ACDelco GM Genuine Parts torque converter pulse width modulation valves are manufactured to be an exact replacement for your vehicle. Genuine OE parts are recommended to deliver the peace of mind that fit, form and function is of the highest standards. Get the factory parts you need from the same source as General Motors with ACDelco GM Genuine Parts. Order the model designed for your vehicle application.
Not Yet Reviewed
$61.99
Dorman automatic transmission torque converter lock-up solenoids are engineered to precise specifications and designed to match the fit and function of the original equipment solenoid on specified Subaru vehicles. On certain Subaru vehicles, when varnish buildup or a short circuit causes the torque converter clutch solenoid to fail, the dealership requires replacing the entire valve body assembly. This Dorman OE FIX automatic transmission torque converter lock-up solenoid allows replacement of just the solenoid, instead of the entire valve body assembly, saving you a significant expense.
Not Yet Reviewed
$68.99
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 188 )
$80.95
—
$89.95
Pioneer transmission overhaul kits are available in four levels: Overhaul, Banner, Master and Super kit. Each of these overhaul kits offer a premium pre-packaged solution for a comprehensive transmission service. The kits include friction clutch plates, steel plates, gaskets, seals, O-rings, pan gasket, rubber lip seals, metal clad seals, sealing rings--and other components specific to the application condition to remedy heavy slipping, such as worn clutches, worn/damaged steel plates, and reseal transmission, due to leaks or disassembly. Order the model designed for your application.
( 3 )
$77.99
Motive Gear offers a full line of manual transmission replacement components. From hubs to shafts, and gaskets to bearings, Motive Gear has what you need for your manual transmission repair or rebuild!
( 25 )
$82.99
PRW Gold Series flexplates are engineered to handle extreme duty applications and designed to endure the punishment of modern high horsepower engines. The 4mm thick centerplate provides a solid foundation for these direct bolt-on drivetrain components. Ring gears are precision double-welded, utilizing robotic machinery and cold-welding processes for added durability. These flexplates are rigorously inspected throughout the manufacturing cycle to ensure you receive the expected quality. They are available in a wide variety of configurations to precisely match your application. Raise the bar on your high performance vehicle with PRW Gold Series flexplates. Order the style recommended for your specific vehicle and engine size. Features and specs: * Designed to fit standard OEM, aftermarket replacement, and high performance torque converters * SFI 29.1 certified * Forged one-piece steel ring gears * 0.035 in. thicker than stock flexplates * Constructed from cold-rolled chromoly steel * Long lasting yellow zinc plated finish
( 43 )
$55.49
—
$106.33
Summit Racing™ flexplate dust covers are manufactured from high-quality steel and are available in your choice of finishes. They allow for easy access to the torque converter area and prevent debris from entering your transmission's bellhousing.
( 349 )
$68.99
Summit Bucks
Sonnax pressure switch rebuild kits can help salvage your transmission electro-hydraulic control module (TEHCM), restore normal switch operation, eliminate codes, and provide renewed shift performance in all ranges. Some GM transmissions send various trouble codes related to internal fluid pressure failures to your TEHCM. These codes may be accompanied by torque converter clutch (TCC) apply problems or shift irregularities such as slipping, flares, harsh application, and bind-ups. Often, the cause is laminated portions of unobtainable OE pressure switches breaching, preventing normal switch operation. Avoid multiple breakdowns that can trigger failsafe mode and TEHCM replacement by ordering the Sonnax pressure switch rebuild kit recommended for your GM transmission.
Not Yet Reviewed
$94.90
Flexplates are important connections between your engine and torque converter, and are relatively inexpensive parts to change out when they demonstrate signs of wear. These one- or 2-piece Pioneer replacement flexplates are machined from durable steel for long-lasting performance. They're available in a wide variety of configurations for fitment with engine and transmission applications spanning six decades.
( 72 )
$52.99
—
$113.99
Summit Bucks
Sonnax stator support shafts provide added strength and solid support to the torque converter stator. They are manufactured from high-quality, heat-treated alloy steel--and the roller burnish finish in the seal bore improves sealing for better pressure. The spline and knurl areas have been selectively induction-hardened to resist wear; a pronounced knurl enables more positive press fit. The Sonnax stator support shafts are specially-designed for severe-duty race applications.
( 2 )
$56.38
—
$60.45
In an automatic transmission the sprag also called a one-way, or roller clutch is a mechanical clutch designed to lock up or stop a drum from rotating when a clutch is applied during an up shift. The torque load they are required to hold is usually a lot, even with stock engines. As horsepower and torque go up the demand on these sprags does too, which can lead to failures. By adding extra rollers or elements and hardened steel outer races you can increase the torque carrying capacity and durability of your transmission. Summit Racing™ Automatic Transmission Sprags and Races offer many different options, select the right one for your transmission.
( 1 )
$86.99
—
$99.99
These Trans-Dapt Performance flexplate dust covers have brilliant triple-chrome plating and will allow easy access to the torque converter area.
( 37 )
$50.99
—
$107.99
BluePrint Engines automatic transmission steel flex plates are a vital connection between your engine and torque converter, and are relatively inexpensive parts to swap out when they show signs of wear. These one- or 2-piece replacements are machined from steel for long-lasting performance. They're offered in 28. oz. or 50 oz. external engine imbalance models. The flexplates are available for a wide range of year/make and engine applications from the 1960s and up.
Not Yet Reviewed
$89.95
On Sale
Replace your old flywheel/torque converter inspection cover with Mr. Gasket inspection covers. They are designed to fit most Chevrolet applications, these covers are made from beautifully chrome plated heavy-gauge steel. These covers are corrosion resistant and facilitate easy installation.
( 8 )
$69.35
$62.45
One size fits all with ATI Ford starter block plates. Now one part is all you need, whether you have a 289 or 351 engine, an automatic or manual transmission, or a 157 or 164-tooth flywheel. Protect your expensive starters, flywheels, and torque converters with a block plate that ensures perfect starter/flywheel alignment and correct torque converter backspacing. Manufactured from .060 steel and gold irradiated, these plates feature ventilation holes to ensure adequate air circulation. ATI starter block plates offer superior parts protection.
( 4 )
$86.99
TCI Kevlar® automatic transmission bands will provide greater torque capacity and more positive 1-2 shifts. They feature an anchor area that is extra-thick, heat-treated, and constructed from Kevlar® to eliminate the stretching and breakage associated with stock bands.
( 15 )
$54.95
—
$78.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$142.95
$92.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
