Availability
Showing In Stock Items. Show All 73 Items.
Hays hydraulic release bearing feed line kits are an upgrade from your factory clutch feed line. They feature tough stainless steel braided lines with limited flex and high-quality fittings. Each fitting contains a rubber O-ring for an accurate leak-free seal. These are great for replacing stretched, cracked, or broken stock lines. Order the kit recommended for your vehicle application.
Not Yet Reviewed
$139.95
Sikky Manufacturing offers hydraulic clutch lines for a variety of applications, including numerous Nissan and BMW cars from 1984 and up. These bolt-on kits are a simple upgrade solution for plumbing your clutch system. The braided stainless steel lines include all necessary fittings and hardware for installation. Most feature a remote bleeder.
Not Yet Reviewed
$159.59
The hydraulic clutch line is responsible for transporting hydraulic fluid from your clutch master cylinder to your clutch slave cylinder—increasing fluid pressure to disengage the clutch, and decreasing pressure to engage the clutch. Holley high-flow clutch hoses serve as direct replacements for the factory originals. They allow for increased fluid capacity, and the braided steel line construction will improve clutch pedal feel—by minimizing expansion and contraction of fluid within the line that commonly occurs with most factory-style plastic/polymer lines. To make installation a snap, a roll pin and O-ring are included. Order the host recommended for your application.
Not Yet Reviewed
$105.95
Summit Bucks
Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together, providing progressive pressure increases as driving conditions become more demanding. Their springs are approximately 10 percent stronger than OEM and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it's needed the most. The combination of these springs and valves in the Sonnax hydraulic line pressure booster kits gives you the best of both worlds--a modest pressure increase at the low-end, with a high-end pressure that's equal to or greater than that of other aftermarket kit springs.
( 20 )
$101.03
EBC CKF carbon fiber lined MX race clutch plate sets are built tough to last longer, grip better, feel better, and drive better than stock cork-based units. Plus, the high-heat ability of EBC CKF carbon fiber-lined MX race clutch plate sets handle much higher stresses and temperatures encountered in racing yet feel gentle and smooth in everyday riding. One day, all Motocross bikes and ATVs will be built using a clutch like this, but for now the only way to get the best clutch in the game is to step up to EBC CKF carbon fiber-lined MX race clutch plate sets.
Not Yet Reviewed
$105.80
—
$163.40
ATI Super Bands are high performance replacements for Powerglide low gear bands, which are so critical in the operation of a race transmission. These bands are completely new cores made of invest cast steel, machined totally in-house with all-new components. Providing 21 percent more clamping area than stock bands, their lining is made of heavy-duty materials to ensure high performance and longevity. They are recommended for use with all popular dual ring servos.
( 2 )
$216.99
American Autowire torque converter lockup kits allow for the installation of computer-controlled transmissions without all of the work involved to install the computer control unit. They include a pressure switch, inline fuse, and wiring harness with preterminated connectors.
( 16 )
$100.70
ATI transmission bands use the finest lining and adhesives available to ensure performance and reliability. They play an important role in transmission operations; Kevlar® lining is available for extreme-duty applications.
( 4 )
$207.99
Hybrid Racing offers clutch master cylinders for a variety of applications, including select Honda© and Acura© cars from 1992 and up. These OEM-quality replacements are popular upgrades because of their fit and performance. Built from aluminum, some models feature a remote reservoir, while others include an attached reservoir. Select the design recommended for your vehicle.
Not Yet Reviewed
$154.84
—
$184.29
RAM hydraulic throwout bearing travel adjustment systems are designed for late model vehicles equipped with internal slave cylinder and bearings. Factory hydraulic systems do not allow for adjustment of the pedal position, often resulting in a high engagement point when using aftermarket clutches. The Ram system allows you to adjust your pedal position lower to the floor for better driver comfort, while allowing you to minimize the release of your clutch system for racing applications. Some vehicles experience shifting problems at higher RPM due to over centering, or over travel of the clutch fingers. By limiting this travel and setting the clutch pedal for minimum release this over travel situation can be eliminated, restoring clean shifts at high RPM.
( 12 )
$198.00
Summit Bucks
Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes
( 11 )
$117.66
—
$235.14
Summit Racing™ offers a complete line of manual transmission parts—including these quality manual transmission bellhousings that feature all-new CNC-machined castings for tight tolerances and a precision fit. Our Summit Racing™ bellhousings are designed to help eliminate flexing, true up clutch alignment, and decrease wear on internal transmission components. They're available for a wide range of Chevy and GMC applications from the 1950s and up.
( 6 )
$145.99
—
$189.99
RAM hydraulic release bearings offer maximum flexibility when setting up the clutch release system in your early or late model car or truck. RAM heavy-duty hydraulic bearings use larger, more robust O-rings, providing the ultimate in durability and long life when compared to factory and other aftermarket hydraulic systems. RAM hydraulic bearings are fully adjustable and are easy to set up with most aftermarket clutches, single or dual disc. RAM hydraulic bearings are also a great choice for use in your Tremec transmission conversion. Application specific bearing kits include every fitting, line, shim and adapter needed to connect directly to the factory master cylinder. RAM also offers other bearing styles with a wider 3.150 in. bearing face needed for 3 and 6 lever clutch applications. When only the best will do, choose RAM!
( 75 )
$129.00
—
$249.00
TransGo automatic transmission shift kits include the needed items to restore proper function to your valve body with much improved drivability and durability. A wonderful addition to your OEM classic vehicle. Features and benefits: * Raises overall line pressure * Calibration for a higher speed manual low * Crisp shift performance and more durability
( 5 )
$230.14
FTI Performance transmission bands will renew the efficiency of your automatic transmission. These steel straps are lined with varying friction materials—red race material, extreme race material, or Kevlar® to stop and hold the drum for slip-free performance. Choose the model best suited for your application, then close the gap on worn-out transmission bands with quality replacements from FTI Performance.
( 2 )
$139.00
Get maximum performance and quicker ETs with these TCI full manual valve bodies. They're engineered to allow full manual control of the valve body, for quicker shift timing and higher line pressures. You get less clutch slippage under high load, so that more power gets to the ground. They're a great choice for bracket cars, monster trucks, and virtually any off-road competition vehicle where a transbrake is either illegal or undesirable.
( 59 )
$221.95
Racing requires high performance parts and quick reactions. FTI Performance automatic transmission direct drums are built for the rigors associated with world-class racing. These replacement parts are constructed from top-of-the-line materials for strength and precise fitment. Order the model recommended for your transmission application.
( 9 )
$155.00
—
$249.00
TCI's billet 13-vane rotor pump upgrade kits can be used as a direct replacement on stock or performance-upgraded GM 200R4, 700R4, 4L60, 4L60E, 4L65E, and 4L70E transmissions. Factory 10- and 13-vane pumps can experience line pressure fluctuations at higher rpm. The robust 13-vane billet rotor adds strength while increasing pump fluid volume to maintain consistent, stable pressure. The hardened pump vane rings add an additional level of durability. Machined from 8620 billet steel, TCI 13-vane pump rotors are strong, and the vanes are precision-machined to exacting tolerances. Perform with proper fluid circulation and consistent line pressure, no matter what your level of performance is with TCI 13-vane billet rotors pumping in your transmission.
Not Yet Reviewed
$150.95
Lokar Anchor-Tight locking flexible engine dipsticks feature a locking mechanism that eliminates the expulsion of the dipstick handle pressure. They feature a PTFE-lined, stainless steel braided outer housing and a flexible inner dipstick cable to measure oil levels. These engine dipsticks come with a brite anodized handle and fittings. Order the replacement model recommended for your year/make and engine application.
( 68 )
$221.95
—
$241.95
Perfection clutch slave cylinders convert non-hydraulic pressure into hydraulic pressure, in order to move other devices located at the other end of the hydraulic system. These assemblies are engineered for faster installation than original equipment, using existing lines and no special tools. OEM plastic cylinders are prone to cracking, but Perfection cylinders are made from solid blocks, bored and honed for accurate tolerances and maximum durability. Hundreds of models are available for applications from 1957 and up—including Ford, Chevy, GMC, Mazda, Pontiac, Nissan, Toyota, and other brands. Choose the configuration and cylinder options recommended for your vehicle.
( 4 )
$103.99
A quality pan is essential for the performance of any automatic transmission. They serve as a reservoir for your fluid, which provides lubrication, cooling, and transmission fluid pressure. Crown Automotive offers a line of replacement automatic transmission pans built to withstand the rigors of many Jeep and Mopar vehicles. The steel pans have a protective black finish, and they are available in basic stock applications, or in deep pan style kits with additional components. Don't let old or leaky fluid pans lead to erratic shifting and decrease the lifespan of your automatic transmission.
( 4 )
$104.99
Summit Racing™ automatic transmission bands are engineered for performance and reliability using high quality linings and adhesives. These bands feature steel straps and are offered in a variety of friction materials like, KEVLAR®, Alto Red, and Carbonite, for several different model transmissions.
( 2 )
$207.99
EBC SRC Street Racer clutch kits are the latest KEVLAR® fibre-lined clutches for sport bikes and racers. These replacement clutch kits are complete engine sets, matched and measured and stack height controlled to provide the perfect clutch rebuild. The kits come complete with 15 percent up-rated heavy-duty clutch springs and a KEVLAR® disc with impregnated lining. They're available for a wide range of motorcycles, from the 1970s and up. Order the kit recommended for your application.
Not Yet Reviewed
$101.14
—
$220.61
BD Diesel pressure transducer upgrade kits are designed to replace the original governor pressure transducers, a leading cause of failure in 5.9L Cummins transmissions. These defects have become even more commonplace on performance transmissions that run higher line pressures. They replace the original sensor with a much more durable and reliable sensor signal to correct range and stop fault codes. As a result, your late model tranny can handle higher transmission line pressures without failure. Additionally, the plug-in circuit has its own built-in temperature sensor for improved reliability.
( 2 )
$210.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
